Question about Samsung LE32R73BD 32 in. HD-Ready LCD Television

Open Question

Sabre 42 in plasma tv locked up

I have a Sabre (Aafes.com) plasma tv, when I turned it off static electricity hit the power button. The tv made a funny sound and the volume bar came up. Now the only thing that works is the power button on the remote. There is a flashing red light on the ciruit board in the back and the standby light is blinking fast.

Posted by on

6 Suggested Answers

Soulvisitor
  • 1113 Answers

SOURCE: 42" Gateway Plasma TV

Please tell us what model gateway TV

Posted on Dec 01, 2007


ladywinn
  • 5138 Answers

SOURCE: plasma ps42p2sb stuck on standby

Your set needs to go in for repair this is no easy fix it yourself problem!

Posted on Feb 08, 2008

melnavz
  • 1226 Answers

SOURCE: Plasma TV-power light does not come on

Hello!

most probably the fuse inside the circuit blown out, You should open the back of the tv to become circuit board visible. But this hard when novice do it.

To be sure that everything will be alright i would rather suggest you to bring the tv to the nearest service center. maybe warranty work for that.

best regards,melnavz

Posted on Mar 03, 2008

  • 1 Answer

SOURCE: Samsung TV won't turn on- trying to fix it. A challenging problem

I had the same problem. I live in NJ and called the local authorized "service provide" listed on the Samsung website. What a joke. Quoted $350 just to show up, never showed up. So I opened my own TV. Took off the plastic back (10 screws) took off the large metal RF shield (12-14 screws) and noticed a blown component. The markings on the component were KL15L and it is apparently an NTC Thermistor. Obviously it got fried and not knowing if there was other damage I decided to set out to replace the entire Power PCB Board Assembly and not the component. There were two part numbers on the assembled board (BN97-00457E & BN94-00622E). After searching online I also found a suitable replacement number for these (BN96-04896A). I found two places who claimed to have the part or have it on order (shopjimmy.com and vancebaldwin.com). After placing orders with both and having neither come through, I broadened my search and found out that the LNR409D was basically the same model as my LNR408D so I looked for its Power PCB Board Assembly part number which turned out to be BN41-00521B. Google search for that part number showed the item available on ebay. I bought it a week ago (ebay 260311519904) for $144 plus $12 shipping. I removed the bad board an hour ago (6 screws about 7 connectors) installed the new one, plugged in the connectors, replaced the covers, plugged in the TV... AND IT WORKS!
Suggestion: If your TV is out of warranty then open it up (what have you got to lose) and see if the problem is obvious and maybe something you can fix (replace) yourself. The parts, spare boards, etc. are out there if you look.

Posted on Nov 16, 2008

leecom72
  • 4806 Answers

SOURCE: Sabre 42 in plasma tv stuck on component 1

remove the power from the wall and leave the TV off for at least an hour, the static charge may have shorted the circuit board for the pront panel controlls.
after an hour or so plug it back in to see if has reset itself

hope this helps

regards

Posted on Nov 27, 2008

leecom72
  • 4806 Answers

SOURCE: Re: Sabre 42 In plasma tv

ic board and mainboard power relay switches may have blown, remove all power from the tv and leave for 24 hours, if the problem is still there call a service engineer

kind regards

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haier tv 42" plasma lock plz master password


  • Text answers and Video link, but there is no 'master password', you have to reset it.
  • How To Unlock Your TV Parental Control Password ' TVBlanket www.tvblanket.com/how-to-unlock-your-tv-parental-control-password How To Unlock Your TV Parental Control Password. ... Whenever a master password is used to reset a TV or ... I have a HLH42ATBB Haier TV. It has a parental lock on ...
  • OWNER'S MANUAL - Haier.com Worldwide image.haier.com/manual/tv/LEDTV/201110/P020111018525755526455... · PDF file operating your TV, and retain it for future reference. ... Lock Setup ... How to use the password function ...
  • Haier 42HP25BAT - 42" plasma TV Overview - CNET www.cnet.com > Home Entertainment > TVs Haier 42HP25BAT - 42" plasma TV overview and full product specs on CNET. Connect with us. facebook. twitter. CNET. Reviews. Top Categories; CNET 100; Appliances ...
  • Haier LED TV ' Home Entertainment ' Haier US www.haier.com/us/products/home-entertainment/led-tv You are here: Home Products Home Entertainment LED TV. LED TV. The following is haier consultant the be fond of according to you choose products. Newest. Popular / 5.
  • How do you reset at Haier LCD tv? - Need to factory reset ... www.askmefast.com > Consumer Electronics > TVs > Format Haier 42 television model 40d3505a does it have a reset button ... Factory password for haier tv mod 40d3505. ... Cara membuka lock televisi haier model le22b600.



  • and Video




  • http://www.bing.com/videos/search?q=Haier+tv+42%22+plasma+lock+master+password&FORM=HDRSC3

    Jul 03, 2016 | Haier Flat Panel Televisions

    1 Answer

    Sylvania plasma tv will not turn on


    power supply board has defective components,check for swollen capacitors and replace them,if problems still not solve email me at rspoliah@gmail.com .for further instructions

    Aug 14, 2014 | Sylvania 6842THG 42 in. Plasma HDTV

    1 Answer

    I have a 42' plasma that just turned off 2night .. no power lights on .. cannot turn on at remote or tv?


    Try unplugging the TV's power cable from the wall outlet for a minute or two. Then plug it back in. This will allow the capacitors inside to discharge and then recharge somewhat (you can hear that with the high pitched rising tone when you shut off and turn on this tv), and also 'reset' the power supply due to a power surge or static build-up. I had the same problems you were having and tried a bunch of things, then finally power cycled the TV (as described above) with great success. Good luck.

    Mar 03, 2010 | Hitachi 42HDT79 42 in. Plasma Television

    1 Answer

    Lg 42'' plasma 720p no picture


    This is not good. Was your tv unplugged or just power button off when you left for vacation. PlasmaTvs are highly susceptible to damage from power surges caused by lighting. Leave unplugged for at least five minutes then plug back in and see if this helps.

    Aug 15, 2009 | LG 42PQ30 42 in. Plasma TV

    2 Answers

    TV won't turn on.


    Stevenson

    the fact that you got shock is because something is not right inside the tv. You need to have that tv check because a manufacturer will not fabricated a tv that can electrocute anyone, specially when you turn the volume. Static electricity is always present in front of any tv that might be the cause of why you got shock. By removing your coat, and touch some metallic object you may get electrocuted, because of static electricity. Please, I want you to have that tv check, I can check that tv for you. I felt something is wrong inside the tv, and something is loose inside like pennies and toys objects. That's my impression. My e-mail address Stevebuy31@hotmail.com

    Jan 02, 2009 | Akai PDP4225M 42 in. Plasma Television

    1 Answer

    Sabre 42 in plasma tv stuck on component 1


    remove the power from the wall and leave the TV off for at least an hour, the static charge may have shorted the circuit board for the pront panel controlls.
    after an hour or so plug it back in to see if has reset itself

    hope this helps

    regards

    Nov 27, 2008 | Flat Panel Televisions

    1 Answer

    Akai 42 plasma controller can not be programed tried every code


    i just had this same problem with my 42" akai plasma and after getting no help no where i finally figured it out on my own. The model i have is a PDP42Z5TA but my guess it will work with yours also.if your remote is like mine there should be a "set" button somewhere up at the the top.hold this down till the "tv" button goes solid red. with the tv on or off keep pressing the power button till the tv turns on or off( dont go too fast) or you can pass it up easily cause when the tv does turn on or off you have to hit enter to lock it in.

    Nov 12, 2008 | Akai PDP4225M 42 in. Plasma Television

    2 Answers

    Hitachi 42plasm tv


    take it back to the store, make sure the power cod is in all the way and you dont have it on a switched outlet, see if you can see any cracks or if the box was damaged/

    Dec 08, 2007 | Hitachi P42H401 42 in. Plasma HDTV

    Not finding what you are looking for?
    Samsung LE32R73BD 32 in. HD-Ready LCD Television Logo

    302 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Flat Panel Televisions Experts

    xxxxxx xxx

    Level 3 Expert

    4706 Answers

    Steve McIntosh

    Level 1 Expert

    11 Answers

    Boo to u

    Level 1 Expert

    28 Answers

    Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...