Question about Astar LTV-19BG TV

1 Answer

Screen not turning on

Have an astar plasma screen thats not powering on

Posted by on

  • 2 more comments 
  • domber83 Nov 23, 2008

    checked the outlet make sure its good and its plugged in the back also made sure the power switch was turned on still no juice

  • yiorgo34 Dec 30, 2008

    mine Started when the Tv would not stay when when I pressed the on on the remote...after about 15 times doing the above..the tv would stay on..after a week or so...it would turn on at all...it just buzzes

  • susankaycook Jan 11, 2009

    My tv is not powering on either but there is a light on the front of my tv that indicates it is receiving power. What should I do?

  • Anonymous Jan 16, 2009

    this been happening for a while to ours. I would tunr it on and off eventually it turns on until tonight. Now light on NoTV :(

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

Hello,
Please call 323-767-6030 I need more detail of your tv maybe i can walk you through it.

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

No Picture or Sound from ASTAR 32 inch LCD Television


Hi,
There is Part Store having Astar LTV-27BG boards in stock. Please check out might help you to power up back your TV.
Regards,

Aug 28, 2008 | Astar LTV-3201 32 in. LCD Television

1 Answer

42 inch Akai plasma - no pix no sound


i think your power board has some serious problem

May 21, 2008 | Astar LTV-2701 27 in. HD-Ready LCD...

1 Answer

Screen not working


The backlight or power supply for it has failed. Use a strong light next to the screen and look for a faint picture. If it is out of warranty, take it to a repair shop.

Apr 07, 2010 | Astar LTV-32ASB 32 in. LCD Television

2 Answers

No Picture or Sound from ASTAR 32 inch LCD Television


There is more than one problem with. A it could be the main board that finally gave out. B the power board in your TV is not work, and now you can see a picture. Depending on how it's connect the screen could be burn out. but just what type of light comes on when you try to turn it on. if the green light comes on and stay on then it has to do with the picture not the power if you need help narrowing down the problem you can call 226-2211 My E Discounts. I'm a tech and we work with a Astar TV from time to time.

Aug 28, 2008 | Astar LTV-20PW 20 in. EDTV-Ready LCD...

1 Answer

AStar Ltv-2701


It appears to be a power supply failure. In about 95% of cases is a defective power supply that causes the TV to behave as per your description.
If you need more info you can email jah2mil@hotmail.com

Jul 01, 2008 | Astar LTV-2701 27 in. HD-Ready LCD...

1 Answer

Astar Plasma


Hello,
try to contact my friend Ivan 323-767-6030. He had working for the astar company as electronic tech maybe he can help you and answer all the problem of your astar tv.
Thank you.

Jan 25, 2008 | Astar LTV-2701 27 in. HD-Ready LCD...

1 Answer

Television won't turn on.


I ordered a power board from Astar through an electronic dealer. Astar would not sell to me only a licensed dealer. However, the power board was blown. My set is working just fine now.

Nov 14, 2007 | Astar LTV-3201 32 in. LCD Television

1 Answer

Display issues, is it going to die?


Most video problems originate in the power supply and not the video boards.
Lack of ventilation seems to be damaging the electrolytic capacitors in the PS's
If you know how to use an LCR meter and desolder the caps, you can determine which ones to replace. The PS feeds all the varius boards in the back of the set. This is the first place to start. If the main fuse is bad, you may have to replace the IC regulator chip too. Hosfelt Electronics or Mouser are good sources for components.
Make sure to replace with 105c rated caps. You may help the ventilation problem by adding several holes on the back plastic panel over the PS. If you have no electronic skills, it is best to hand it to one that has. Good Luck.

Oct 09, 2007 | Astar LTV-3201 32 in. LCD Television

9 Answers

Problems with the Astar TV turning on


OK HERE'S THE DEAL WITH THE ASTAR YOU ALL SPEAK OF THE PERSON FROM SOLUTION 3 IS RIGHT IT'S A POWER SUPPLY ISSUE WE'VE GOT 130 OF THESE I'VE FIXED 40 OUT 44 POWER SUPPLIES. IF ANY OF YOU HAVE SOME SKILLS WITH SOLDERING. THE MAIN PROBLEM IS IN THE CAPACITORS. THERE ARE 3 SETS OF CAPACITORS THAT NEED TO BE REPLACED. 4 3300uf 35v, 8 2200uf 25v, 7 1000uf 10v. ONCE YOU REPLACE THESE YOU SHOULD BE GOOD TO GO. THE OTHER 4 WE HAVE PROBLEMS WITH ARE STILL POWER SUPPLY ISSUES BUT ALITTLE MORE IN DEPTH WILL POST WHEN WE FIGURE OUT THE PROBLEM.

Jan 17, 2007 | Astar LTV-2701 27 in. HD-Ready LCD...

Not finding what you are looking for?
Astar LTV-19BG TV Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Astar Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68209 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you an Astar Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...