Question about Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

1 Answer

Maytag jetclean error code 3

Dear Fixya,

I am receiving an error code E3 towards the end of the cyclke on my Maytag Jet Clean. I have cleaned the files and check all lies etc. But nothing fixed it. What do you suggest?

Regards

Andrew

Posted by on

  • rikkiandmatt Nov 25, 2008

    I feel your pain Andrew - I'm on the hunt for a solution...

  • duncan85 Feb 16, 2009

    same problem here. And not draining properly...!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

Well this error code is Cause due to: Water supply switched off.
Remedy: Switch off appliance. Turn on water supply. Reset the cycle. thats all to reset the error code.
Post comments if further you have the same problem.......

Good Luck!!

Thanks

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Users manual showing how to operate maytag jet clean dishwasher quiet plus


Good Morning Marion!

You can find installation and user guides for the Maytag Jetclean here
Maytag Jetclean Dishwasher (it's the Maytag site, and the page has several links to PDF files. The specific owners manual is at
http://www.maytag.com/digitalassets/MDB5000AWB/Use%20and%20Care_EN.pdf

Hope this helps, and good luck!
D

Nov 19, 2015 | Maytag Dishwashers

1 Answer

My washin machine is just stopping thru cycles and beeping continuously until I switch off - reading E3. My father thinks it might be the heater, is that right. I'm having a lot of trouble getting...


Hi, the E3 error is comes up when the water heater element does not work properly or the filter mesh is blocked. Remedy: Clean the filter mesh and if the problem continues, the main board needs to be replaced.

Jun 24, 2011 | Maytag 24 in. MDB6600A Jetclean II...

1 Answer

Maytag jetclean Model number MJD 3000 AAW Problem : E3 error towards end of cycle


Hi,

Cause: The water heater element does not work properly or the filter mesh is blocked.
Remedy: Clean the filter mesh and if the problem continues, the main board needs to be replaced.

The Filter mesh in the bottom of the appliance.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Jun 14, 2011 | Dishwashers

1 Answer

My dish washer is not draining it is a maytag jet clean aprox10 years old


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

May 20, 2010 | Maytag 24 in. MDB8750A Jetclean II...

1 Answer

Maytag Dishwasher 2004 Jet Clean


go to the maytag website and they should have a list of codes under troubleshooting if not call maytag repairs

Oct 30, 2008 | Jenn-Air JDB9910 Dishwasher

1 Answer

Maytag jet clean


If the arm has a crack or is broke pressure will not turn it properly. Also check the rubber boot that seal the wash arm on the rear supply tube. If the rear supply tube holes are not sealing from inside with the rubber flap seal that will effect it also.

Jul 13, 2008 | Maytag 24 in. MDB5600A Jetclean II...

2 Answers

Maytag Dishwasher


THE 3 SEC LIGHT WILL NOT SHUT OFF AND WE CAN NOT RUN THE DISHWASHER

Jul 01, 2008 | Maytag 24 in. MDB5600A Jetclean II...

1 Answer

Maytag dishwasher jet clean eq plus water not filling with water


My Maytag Jetclean Flexiload is 4 years old. Upon choosing a program the timer counts down but little action is heard. Near the end of the cycle an Error message comes up. The dishes are stiil uncleaned.

Apr 23, 2008 | Dishwashers

1 Answer

Maytag dishwasher latch


If it like mine, the latch is out of adjustment and you need to give it a whack with your hip to start it. If I adjust the latch looser, it leaks.

Oct 24, 2007 | Maytag 24 in. MDB8600AW Jetclean II...

1 Answer

Error e3?


i need your serial num its important 17

Apr 02, 2007 | Maytag 24 in. MDB5600A Jetclean II...

Not finding what you are looking for?
Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher Logo

779 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...