Question about Fujitsu Siemens Celsius 670 (LKN:SWD-670115-031) PC Desktop

1 Answer

Freezing Hello,I have a fujitsu siemens personnel comp. At the beginnning i used to copy from my video or tv to my PC to make dvds,then 1 day my hard drive packed up. I renewed my hard drive and after a couple of months i started using the program where i copy from vidoe to Pc again.This program opens up but when i start copying the PC freezes and i have to switch off the PC at the main power supply and switch on again.I never used to have this problem with any other program but just this copying program.As time went on i started having the same problem with other programs and then eventually when i start up the pc before windows can actually open it freezes,then i have to put the pc off again and restart,sometimes it goes a little firther in winddows and freezes again,,,Please help me in solving or the possible reasons why its doing this. regards Rishad Khan

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers
Re: Freezing

Firstly i would suggest unindtalling the programme and installing again. To give a clue as to what the problem is, go to Control Panel>Performance & Maintanence>Administrative Tools>Event Viewer. On the left hand side, look down the list to Applcations and click on it; and look at the dates when you ran the programme to give a clue as to the fault.

Posted on Dec 30, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I need a recovery disc for a Fujitsu-Siemens Scaleo 600 desktop PC

I wouldn't worry that you won't get it running without a Recovery Disk.
Just wanted to state that right off the bat.

You can buy a fresh, new Genuine copy of Windows XP, and use it.

Jus sayin'.

[Microsoft makes one Master disk. From it all GENUINE copies are made, and sold to the consumer]

Don't know that much about Fujitsu Support, as to obtaining the Restoration Disk, for THAT computer.
Guess there's only one way to find out, huh?

That apparently would be to choose THE country you are in, as support is country specific.
Looking at this from a USA perspective,

Call 1-888-385-4878

Have to try that tomorrow. It's presently 9:52PM, lol!

No wait! Hold the phone.............

Just called 1-888-385-4878
It's a 24 hour line.
Just talked to the representative on the phone.

I didn't have the Serial Number, naturally; but did get basic information.
The Serial Number is needed for specific information.

[NOTE* Do NOT give out the Serial Number on a worldwide forum.
ONLY give to an authorized Fujitsu representative ]

From what I understand it does depend on the disk you need, and the type of computer..
IF, I understand correctly, the disk (DVD) is $12, plus the shipping and handling.
Sounded like the maximum cost is $28. (USD)

Indicated a 2 to 3 day ship, and sent by Fed Ex.

Best method of course is to just call them yourself.

If I may, would appreciate hearing about how it was, for you to obtain the disk.
Will increase my knowledge.

[A LOT cheaper than a fresh, new Genuine copy of Windows XP, too!
Lol! ]

For additional questions please post in a Comment.

Mar 07, 2013 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

2 Answers

I cant find the vga Drivers for my machine. Fujitsu siemens scenic p300

Hello there should be a serial number on your product and enter it on the link below

If that don't work you can always try windows update.

or ill post a few links i have fount for you.

the best one is the one below it has all of the drivers

hope this helps.

Jul 13, 2011 | Fujitsu Siemens SCENIC P300 PC Desktop

2 Answers

I have bought a computer from Fujitsu-Siemens Scenic E620 model with a 80 GB hard drive and 1 Gb RAM. The processor is a Intel Celeron. When you install Windows XP Operating System SeviPack 3 I see that I...

First, Fujitsu Web site.
Second, run programs like everesthome to find out its drivers. (Please, don't use an online auto detect program, It can be damage you com by adware or virus, or be hacked.) Then search each drivers.

I hope it helps.

May 26, 2011 | Fujitsu Siemens SCENIC E600 PC Desktop

1 Answer

I have just put in new hard drive as old one was to small. It is now saying there are no ethernet drivers. So i cannot connect to internet.

You need to use another computer to go to the fujitsu siemens website.

download the drivers for the machine, under desktops.
Then transfer the drivers to the right computer with a usb memory stick or anything else

install the drivers.

Jul 12, 2009 | Fujitsu Siemens SCENIC E600 PC Desktop

1 Answer

Fujitsu Siemens Scenic T on windows 2000 Pro SP4

to fix it:
u should boot up with windows 2000 cd

go to repair windows then go recovery console from cd rom
now u'r in dos mode:
if u'r cd rom drive is d: and u'r hard disk is c:

just type this:

c:\copy d:\i386\ntldr
it's ntldr not ntdlr
then type:
u'r pc will restart and everything should work fine.

Hope this Helps. Regards Khushroo

Mar 09, 2009 | Fujitsu Siemens PC Desktops

3 Answers

Hello, i have a Fujitsu Siemens Celsius R610 PC. I wiped the hard drive and trying to load a fresh MS Windows XP Prof on but it won't let me. Its saying it can't load or see the HD. any thoughts.

In order to fully install windows you need to have the driver loaded for your SCSI controller built into the mother board. Here: is the website to get the SCSI drivers. Just make a floppy disk with them and when you load windows setup from the disk when it asks you to press F6 to install third party drivers do so. Then just point to the disk and load them up. When windows finishes loading the rest of the drivers and starts the setup process your hard disks should now be accessible.

Jan 10, 2009 | Fujitsu Siemens Celsius R610 PC Desktop

1 Answer

Finding the videocard in a Fujitsu Siemens Scaleo 600 PC

firstly check the pci slot where your moniter you plug in it. and change the card.

Nov 29, 2008 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

1 Answer

I am having problems connecting the Fujitsu Siemens M7405 to the tv, using tv out. What settings/conections should I be using?

USE THE S-Video port for connection to the TV Fujitsu Siemens M7405 has only one s-video port

May 09, 2008 | PC Desktops

1 Answer

Onboard Sound Drivers and Video Controllers

Hi EsteG, found all your drivers for your SCALEO 800, these are also used for the SCALEO 800Si 2410 Silent+. They call it the 800 series, for XP. Click the link below.

Because it's the whole 800 series you'll need your manual to pick the correct Audio driver as noted in your manual. To narrow down the ammount of drivers in each area. There should be a sticker on the PC that has the serial No# . Enter that number on this link below. (Siemens Fujitsu) does not make this easy.

If I can be of more service, just ask.
Good Luck & Kind Regards.


Mar 25, 2008 | Siemens Fujitsu SCALEO 800Si 2410 Silent+...

1 Answer


You may be using the incorrect dvd disks either DVD+R or DVD-R
or you might have dual layer DVD disks which you will nedd a Dual layer dvd writer.

Down load of of an easy to easy dvd writing program aas this may help as well.

Hope of some help

Dec 31, 2007 | Fujitsu Siemens SCALEO 600 (FSP:83C005617)...

Not finding what you are looking for?
Fujitsu Siemens Celsius 670 (LKN:SWD-670115-031) PC Desktop Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Are you a Fujitsu PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides