Question about RCA HD65W140 65" Rear Projection Television

1 Answer

I'm in need of the reset code for my RCA HD65W140 '' RP'' TV

It has done this before a few times, each time we've had to have somebody come look at it, but every time it's the same old problem, needs to be reset. There was a combo of buttons you hold down for a set number of seconds to reset the television, but I can't remember what the combo was, we've been stuck without a television in our living room all day.
Yes, this is a rear projection television, as the topic says it's an RCA HD65W140. Thanks in advance !

Posted by on

  • dbgt529 Nov 22, 2008

    Rather, not a code, I'm trying to figure out how to use the reset function , sorry about that.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Our tv has a line about 10 inchs down that makes the picture distorted -on the bottom about 3 inchs up is black you cant see any of wording if there was any annoucements being posted.

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My RCA D52W19 HDTV Ready TV will not turn on. The power led comes on three times after pressing the button on the tv itself or attempting to power on with the remote. The condition has been getting worse...


Hi Aaron,

I just want to ask you something before I give the solution, does the unit gone to start-up problem (needs warm-up before it finally turn on, needs to pressed the power button key several times, needs to unplug from the outlet and plug it back in)before, you have said that you've encountered it last few months?

Jdvillanueva

Sep 29, 2011 | RCA D52W19 52" Rear Projection Television

1 Answer

I need to reset my password on my rca HD52W55


Hello
If your RCA tv has locked or you want to reset your password you can opt any one of the followinf option to unlock it without any passcode nd can reset it after.

Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won

May 06, 2011 | RCA Televison & Video

1 Answer

The power deflection board is messed up will it be better to invest in a new tv?


Only you know this answer. The refurbished boards on some of these TV are no longer available. You would need to send the current board to PTS Electronics to have it reworked. Approximate cost would be about 200 bucks! Good Luck!

May 24, 2010 | RCA HD65W140 65" Rear Projection...

1 Answer

Sony rp tv kp-53xbr35 wont turn on


YOu may need to replace the bulb in the unit, check the bulb and if blown, you need to replace and after replacing reset the lamp time hours. Good luck.

Nov 14, 2009 | Sony KP-53XBR45 53" Rear Projection...

1 Answer

TV RESET


I found the right manual on the tv and reset the lock code i forgot thanks anyway

May 28, 2008 | RCA HD65W140 65" Rear Projection...

2 Answers

RCA D52W20 52" TV SHUTS DOWN AFTER A FEW MINUTES


this is the filment circuit having a problem. i think you will find it is a loose connection on a solder joint. Goodluck

Jan 16, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

RCA HD65W20


The rca ITC 222 chassis is a shutdown prone set. What i mean by that is that any problem with any cuircit the processor shut the thing down. thers about 20 or 25 different things that can lead to a shutdown. THe first thing they tell you to do is to shut the thing down and uplug for about 30 min. i personally never seen this work. but it is the first thing to try. Next thing to know is that if the light on front panel comes on its not the main fuse. the processor is recieaving power enough to generate error codes. technicians have a special computer interface to read these codes from the processor. which leads me to finale thing these sets is what i like to call value sets there about 800 new if the set has crt prob you cn expect about 300 to 500 to fix so most time not cost effective to fix

Jan 07, 2008 | RCA HD65W140 65" Rear Projection...

1 Answer

"UNUSABLE SIGNAL"


l have a 42 in tv rca connected from a direct satellite and i have no picture or sound tryed different connecters only black screen with unsable signal

Jan 07, 2008 | RCA HD65W140 65" Rear Projection...

1 Answer

RCA projector HD65W140


yea i got my similar tv for 75 bucks blown hv splitter replace with bad resistor blew again 1 day later. i just replaced it tonight along with the flyback hopefully it works

Aug 02, 2007 | RCA HD65W140 65" Rear Projection...

Not finding what you are looking for?
RCA HD65W140 65" Rear Projection Television Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...