Question about Fuji FinePix A600 Digital Camera

2 Answers

Every time I turn on my camera it says ''FRAME NO. FULL''

When I turn on my camera, it says "FRAME NO. FULL" and it won't take any pictures. Is there any way I can fix it?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Hello, it will help:

go to settings menu, then look for FRAME NO. setting. Set it to RENEW. It should do the trick.

It happens because the internal picture counter has reached its limit and you have to reset it to zero.

Good luck!

Posted on Nov 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Goto FORMAT under SET UP and choose ERASE ALL DATA. Be sure you have saved your faves somewhere else as you may lose protected photos.

Posted on Mar 24, 2009

2 Suggested Answers

Bubbabear64
  • 2794 Answers

SOURCE: camera says Frame no full cant take anymore pictures Help!

Copy your card to hard drive, reformat your memory card, and see what the numbers of pictures it gives you.

If you lower the resolution of the camera, the more pictures you can take.

Posted on Jun 16, 2008

Steve5
  • 423 Answers

SOURCE: "Frame NO. Full"

Try going in to the "setup" menu and change the frame numbering from "continuous" to "renew", if it is not already done. Sounds like you are on the continuous setting which keeps adding numbers, even though you've erased many. Going to renew starts the numbering over so it keeps reusing previous numbers.

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won`t take pictures


In the menu there is frame no renewal option please check it as renew.. it will clear the issue

Jul 22, 2010 | Fuji FinePix A500 Digital Camera

2 Answers

File No. Full


Check that the memory card is not full, in case you will need to delete pictures.
Take off and put back batteries and memory card

Jul 24, 2008 | Fuji FinePix F700 Digital Camera

1 Answer

!FRAME NO. FULL


Save all pictures to your computer.
Turn camera on, press the menu/ok button, select Setup, press ok.
select Frame No., change Frame No. to Renew, press ok.
Leave Setup.
Press the menu/ok button, select Setup, press ok again.
Select Format, press ok / ok until the card is formatted.
Now the counter should start over with 100.0001 again.
Set Frame No. back to Cont. to avoid to many images with the same filename.

Feb 22, 2010 | Fuji FinePix S5700 Digital Camera

1 Answer

'frame no. full'


You need to reset the frame count. Have a look at my post for this on my profile

Dec 18, 2009 | Fuji Finepix Z20fd Digital Camera

1 Answer

Won't let me take pics, says FRAME NO. FULL


Your Counter has reached 999.999
Here's what you do.
Make sure you have no pictures on your card to start with.
Place the card in the camera and turn it on.
Press "Menu" and go to the "Set" menu and select "Format". This will wipe your card completely clean. When this is done select "Frame No" in the set up menu and set it to "Renew".
Now come out of the menu options and take a picture.
When you review your picture the counter should read 100.001
Now go back to the set up menu and reselect "Frame no." and set to continuous ("Cont.")
Happy snapping

Oct 16, 2009 | Fuji Digital Cameras

1 Answer

What does Frame No Full mean?


If you look at the top right of your camera screen when reviewing pictures you should see the frame count. As yours is reading "Frame number full" the count should be reading 999.9999 so you need to reset to 100.0000. How to do this is posted in my tips section of my profile under "THE ONLY WAY I KNOW HOW" I have pasted the section below.
Cheers

FRAME NUMBER FULL!!

If you get this message on screen then your counter has reached 999-9999 and the camera will not take anymore pictures until you reset the counter to 100-0001.

To do this follow the instructions in your manual or read on my friends...

Firstly, make sure you have a picture card inserted into your camera and you have saved any pictures on it to your pc because you are about to format the card inside the camera and you will lose any pictures you have stored on there.

Ok. turn your camera on and press the menu/ok button and select "SETTINGS" from the menu.
Scroll through the menus until you find FORMAT. Select this and you will be asked if you would like to continue. Select OK.
Depending on how large your card is (16mb - 1,2 gb etc) will determine how long this will take but it's not very long.
After you have done this your card is now wiped clean of memory and has been formatted to be used for your cameras software.

Next, select FRAME in the SETTINGS menu and set your camera to RENEW and press OK.
Now come out of your menus and take a picture.

Review the picture taken and check the counter reading in the top right of the screen. It should now read 100-0001. The counter has now been reset.

Now go back into your menu and select SETTINGS again and scroll down to FRAME once again. Set this back to CONT (continuous) and press ok. Your camera should be reset and you can now use it.

Note: If you have more than one card you will have to reformat each card because the camera will store and recognise the frame numbers stored on the card and continue using them rather than set them to 100-0001 or will open a new folder on your card and start using this as the new one thus taking up more space on your card reducing the number of shots you can store on it

Sep 30, 2009 | Fuji FinePix F40fd Digital Camera

1 Answer

Come up with frame number full


The problem is ther internal memory is full or your external card is full and you have to reformat the card. Then you should be able to use the camera .

Apr 10, 2009 | Digital Cameras

1 Answer

!Frame No. Full and cannot take pictures


Well i was just having the same problem and decided to search for an answer. It looks like you might want to reset your camera. Go to menu, set up then click on three and you should find "reset" click that and in no time you will be able to take pictures again!

Mar 21, 2009 | Digital Cameras

1 Answer

Camera says Frame no full cant take anymore pictures Help!


Copy your card to hard drive, reformat your memory card, and see what the numbers of pictures it gives you.

If you lower the resolution of the camera, the more pictures you can take.

Jun 16, 2008 | Fuji FinePix F480 Digital Camera

2 Answers

Frame number full


when i turn on the camera I get a frame no. full, I tried formating the memory card to no avail. I can't take a picture with this error

Jun 16, 2008 | Digital Cameras

Not finding what you are looking for?
Fuji FinePix A600 Digital Camera Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Digital Cameras Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fuji Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...