Question about PC Desktops

1 Answer

Prop bitmap dll not loaded - PC Desktops

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

This often happens with Office 2007 and Dell or Lexmark printers. Go to Start, Printers and Faxes. Your Dell or Lexmark printer is probably designated the default printer. Change the default to "Send to [name of Office program]" -- it should already be listed in your printers and faxes. Then try your print preview. You shouldn't get the error.

Of course, you're not going to want to leave your default printer settings like that. But this step assures you that the problem is with your printer and/or its software, not with Microsoft's product. You'll want to contact your printer manufacturer to resolve it.

In the meantime, you have two choices -- live with the annoying error popups, or change your desired printer every time you want to print something.

Let me know if this helps!

~~Cheryl

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Icuin36.dll wont load of can not be found


Download the file from this site http://www.dll-files.com/dllindex/dll-files.shtml?icuin36, unzip it and paste in into the system32 root folder. You'll have to do this using another pc. Mount your hard drive on another pc, locate the C:\windows\system32 folder and paste the unzipped file (icuin36.dll), turn off the Pc and remove your hard drive and again remount on your Pc, now Power on your system, it'll be ok. You can also do this without using another Pc, but you have to know how to use command prompt. Good luck.

May 22, 2010 | PC Desktops

Tip

Coping with and avoiding Hard Drive Volume Bit-map Errors


If your computer "locks up" or reboots itself, the problem is frequently lost or corrupted files on your hard drive. Most of the time the problem can be corrected by running chkdsk. However, one of the exceptions is when chkdsk reports that the hard drive has volume bitmap errors.<br /> To run chkdsk, click on Start, All Programs, Accessories and Command Prompt. This will open a "DOS Box" where you can enter DOS commands without the results scrolling off the screen before you can read them. Then key in chkdsk C: (assuming that drive C is the letter of the hard drive where your operating system files and applications programs are stored).<br /> Chkdsk will run in the read-only mode and report (but not repair) problems found on your hard drive. Chkdsk will then ask you to run chkdsk with the F switch to fix the file system. Make a mental note whether or not chkdsk reported any problems with the volume bitmap, then key-in chkdsk C: /F <br /> You will get a message that the drive will be checked (and repaired) on the next system restart.<br /> Enter exit to close the DOS box and the restart your system. Chkdsk will run automatically when your system restarts. If no volume bitmap errors were noted earlier, chkdsk should have repaired the problems with the hard drive. You can verify this by opening another DOS Box and running chkdsk without the /F. However, if bit-map errors were reported initially, chances are they will still be there as chkdsk cannot repair them.<br /> If you still have volume bitmap errors, you can either take your PC to a professional who may be able to repair the volume bitmap with specialized software, or you can back-up all of your data, format the hard drive, and reload the operating system and all applications.<br /> A frequent cause of volume bitmap errors is cloning (copying) a hard drive with more than one partition to another (usually larger) hard drive. The partitions should be sized proportionately on the target drive but sometimes the partition sizes are not reported correctly in the partition table and sometimes in the master boot record. <br /> Avoid cloning drives with multiple partitions, or if you do, immediately run chkdsk on the target drive to check for bit-map errors.

on Oct 25, 2010 | PC Desktops

Tip

How to Register DLL files


On Microsoft Window's operating systems, a DLL stands for Dynamic Link Library. DLL's are relatively small files that include a library of functions- usually data that can be shared across multiple applications. DLL's are called upon by various applications and can be loaded and utilized by these applications concurrently.
Registering a DLL
There are two easy ways that a DLL can be registered in your Window's operating system's registry, the first is the simplest, known as self registering files, the second way is to manually register a DLL.

Self Registering Files

It should be noted that many DLL files are self registering, they include information required to store themselves in the operating system's registry. As the name states, self registering files require no human intervention. Self registering files will automatically store themselves on your machine and become accessible when needed. Besides DLL files, other types of files that are sometimes self registering include .EXE and .OCX.

Manually Register Files

The second method used to register DLL files on your computer is via manual registration. Manually registering a DLL file is quite simple and can be done in only a few steps.
1. The first step is turn on your computer, launching your Window's operating system.

2. Once your Window's operating system has loaded completely, click on Start and then click on Run.


4. Once the command is input into the Run field correctly, press Enter.

5. Once the DLL has been registered, you should receive a confirmation in the form of a pop up box. This message will list your newly registered DLL file and confirm that is was successfully registered into the registry.

on Aug 28, 2010 | PC Desktops

2 Answers

Load needed dlls for kernel.


hi,
http://www.fix-all-dll-errors.com/kernel.dll/

u can go to this site...this will help in case of missing or for downloading dll's or also if there is errors in dll's..!
I also registered few dll's from this site...worked in my case :)

Sep 24, 2009 | HP Pavilion A530n (DW234A#ABA) PC Desktop

1 Answer

RTHDCPL.EXE err


Error Message after Installing Security Updates 925902 and 928843 This afternoon (April 3rd, 2007) my Automatic Updates alerted me about a couple updates I needed to install, so I did. Upon rebooting the computer though I was confronted with the following error message
"RTHDCPL.EXE - Illegal System DLL Relocation"

"The system DLL user32.dll was relocated in memory. The Application will not run properly. The relocation occurred because the DLL C:\WINDOWS\SYSTEM32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL."
  


Cause of Error Message

Turns out this error occurs when the Realtek HD Audio Control Panel by Realtek Semiconductor Corporation is installed. This is my built-in sound card on my computer.

The HHCTRL.OCX file that is included in the Security update 928843 and the User32.dll files that is included in Security Update 925902 have conflicting base addresses. When Windows loaded the HHCTRL.OCX file before it loads the User32.DLL file, the problem occurs.

The error occurs when the following third party programs or applications are installed on a computer with Windows XP Service Pack 2 installed. 
Realtek HD Audio Control Panel
ElsterFormular 2006/2007
TUGZip
CD-Tag
Microsoft now has released a patch to correct the problems, you can go to the following link to download and install the patch for the patch :-)

http://support.microsoft.com/kb/935448

Oct 18, 2008 | PC Desktops

1 Answer

Error loading c:progra~1\my webs~1 bar\2.bin\m3 plugin dll


http://www.dll-files.com/dllindex/m3plugin.zip?0VEdSCYIhX

click on that link save it to your desktop and then extract it to the following error location
C:Progra~1MyWEBS~1ar.binM3PLUGIN.DLL

Sep 17, 2008 | PC Desktops

2 Answers

My laptop was turned of during an recovery point[system restore]


Try doing a system restore from a previous retore point. However, you will not be able to recover any files that were saved after that point.
If all else fails, you may have to reinstall the OS. The "wininet.dll" file may be from some software you installed at a later point..

May 15, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

4,467 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...