Question about Kenmore 63672 Convection/Microwave Oven

1 Answer

Kemore MWave Hood 721.804 Fan and Light not working

I unscrewed the light bulb underneath my MWave Hood the other day and the light bulb exploded. Since then, the fan and light no longer work (I replaced the bulb). I am guessing this is a fuse or something, but cannot locate it. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 8,820 Answers

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

At our site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rang lights underneath unit don't work


This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan, cooling fan, turntable, and/or inside light operation, too.

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid with a one year guarantee.

Or you can buy and replace the control circuit board.

Details of our service are at our Web site, along with a video showing how to remove a typical over the range control panel assembly in under 5 minutes.

You can find links to helpful exploded view diagrams and part ordering help here.

I recommend that you bookmark that link to your favorites.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Oct 11, 2011 | GE Profile Spacemaker Over-the-Range...

1 Answer

When I was unscrewing a burnt out hood lamp on


I would not use the lamps. Sounds like there is a shortage in the wiring for the lamps. They lamps should run together, and if one of the sockets have a short or burned wire it will not let it complete the circuit. This could be a fire hazard, so I would replace the whole microwave. It would be more trouble to tear it apart and find the exact problem than it's worth.

Jan 04, 2010 | Maytag MMV4205 Microwave Oven

1 Answer

Light doesn't work on my over-the-range microwave oven


Absolutely. We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

Sometimes this will also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Mar 13, 2009 | Microwave Ovens

2 Answers

GE JVM1440BD Microwave hood lights don't work


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

If your relay is bad and you want to replace it yourself, it is part # 3501-001050 and you can find helpful exploded view diagrams of your microwave and order that part here.

Be sure to also do any needed circuit board repair with 30AWG wire to prevent it from doing worse damage if another bulb shorts.

Feel free to contact me directly (and please remind me of your full model number) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
prototech@usa.net
http://www.microwavedisplay.com

Jan 09, 2009 | GE JVM1441 Microwave Oven

1 Answer

Kemore Microwave Hood Combination


I HAVE KENMORE 665/61629 LIGHT STAYS ON. AND DO NOT COOKS. AND THE FAN DOES NOT WORK.

Jan 05, 2009 | Kenmore 63662 / 63664 / 63669 Microwave...

1 Answer

Pressed light button and bulb exploded and lightening bolt shot from underneath the appliance. now it is completely broken.


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

Please feel free to contact me directly if you need more help.

We're happy to help and we appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Jul 06, 2008 | Whirlpool Microwave Ovens

1 Answer

Exploding microwave sounds - No Lights, No Fan, but Heats Okay


We see this a lot. The problem is on the control panel, which we regularly repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 07, 2008 | Microwave Ovens

1 Answer

Lights quit


We see this a lot. The problem is on the control panel, which we regularly repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

Jan 14, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Hood lights do not turn off...


The problem is on the control panel, which we regularly repair nationwide for $39.95 postpaid.

This is far less than a replacement circuit board, assuming it's even available anymore.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This often can affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on.

We have full details and critical safety information and disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Nov 15, 2007 | Sharp R-1481B Microwave Oven

Not finding what you are looking for?
Kenmore 63672 Convection/Microwave Oven Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...