An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: Gigaset SE587 networking adaptor
Any of the major manufacturers ie: Linksys, Belkin, D-Link Cnet etc. will work. Go to your local computer or office supply store and tell them the router that you have and they should be able to direct you in the right direction. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Its means that 11 people are using you're router. I would turn on WPA or WPA2 security on the router, and put a password on it, then use whats called MAC address filtering so it only allows you internet access. Also disable WPS if you can because it can be hacked easily.
Gigaset 504 AGU black color signal antenna . How to find (Host Name) and only showing there mac address ans ip address. i want see witch one using my net and we want fine friend computer name in my router .
Check the type of encryption the 572 is set for, I've found a few cases where it needs to be WPA and not WEP.
As a temporary measure, you could switch off wireless security.
Lastly, check your not getting a channel conflict, if a neighbour has a wireless access point with the same channel, you may get problems, which will require logging onto the 572 and changing the wireless channel
Well, as i understand you want to plug out the wired lan between computer an router and switch to wireless lan between computer and router?
If so, then you need to buy a wireless card or adapter in order to connect to router via computer without using ethernet cable. Wireless dongles in my opinion is the way to go, it is portable and very cheap and it works very good. Here is a link where you can compare prices and reviews.
What i would suggest is either using the suggested routers which are suggested for the reason of they are know to connect with little error. Other routers conduct themselfs differently and cause errors. What you might try is updating your router and drivers on your computer. This should update your router to the best know configuration and allow the smoothest opperations. If this doesn't answer your problem please post again.
Please post what you do and how you did it.
I look forward to your posts.
If this is router is gifted to you by a friend of yours who is from UK, Please check if this is locked. Most of the times these would be locked by the ISP. This is a router provide by tiscali UK. Please select the dialing number to 0,38 this is the dialing code for india.
If you use this should work and use 192.168.1.1 as default DNS.
The Default gateway for Siemens Gigaset SE587 is 192.168.1.1. Open Internet Explorer and put the def gateway in the browser.
The default username and password for siemns router is admin.
Click on Setup Tab than Basic Setup on left hand side. Update the details as folloing- Use – Tiscali data PPPoA Interface PVC Selection – Tiscali data PPPoA Authentication – Auto User Name - Tiscali u/n Password - Tiscali password PPPoA Connection Mode- Always On NAT - ON
And click on save settings. To confirm if the customer is connected, check the status of Online light – which should be green. Alternatively click on status (On top) to check internet status to confirm connection.
Setting Up Wireless connection – Click on da wireless tab on the top.
Ensure that the Auto channel is disabled and the wireless channel is 11, wireless n/w is Enabled and mode is Mixed.
To secure the wireless connection – Click on Wireless Security option on left hand side If you want the Security mode as WPA than select the wireless security mode, as WPA and enter WPA Shared key which would be on the base ofthe router. Again click on save settings.
Try connecting to the wireless network again and I m sure it should work..... lemme know if it does.