Question about Kenneth Cole Reaction - REACTION SILVER & BLACK CRYSTALS WATCH RK2203
YESTERDAY I PURCHASED NEW KENNETH COLE REACTION WATCH
BACK SIDE INFORMATION IS KC3774 U54-07
HOW ABOUT THE ORIGINAL PRICE OF THIS MODEL
I just dug my watch out after not wearing for a few years and had the same problem. There is an easy way to adust this watch's time and alarm, basically one way to enter both.
1) With the watch in the regular time display mode (doesn't matter if 12 hour or military time), depress and hold the lower left hand button (mode button). After a few seconds the watch appears to shift to alarm mode and it is blinking. This puts you into the mode for adjusting the alarm.
2) If you want to adjust time, date, etc rather than alarm time, after you have done step one, simply press that same lower left button again, and then it will put you into the time mode, but this time the time mode is blinking and you can adjust the various components (seconds, minutes, hours). You can only move minutes, hours, etc forward, no way to move backward. You will start off with the second display blinking, probably skip that unless you need to adjust seconds. Depress the upper right button to shift to the next option (minutes) and you will see the minute display blinking. Adjust the minutes by depressing the lower right button. When finished depress upper right button to move to next option (hours) depress the lower right button to move the minutes/hours/month/date forward as necessary, when you finish just press the lower left button again and it pulls you out of adjust mode and you are back in regular time viewing.
I had to post this because I've had this problem in the past and it killed me. Its kind of intuititve after you get into the adjusting mode by pressing the lower left button- remember, initially it will put you into adjust alarm mode, but press again and you will get into adjust time mode.
Posted on Nov 12, 2008
You have to take the back off. If it has about 6 slots around the back, then it screws off. If it's flat, then you can pry it open. If you pry it open, it,s very difficult to get it back on all the way. You may have to get some tools, or go to a repair shop.
Posted on Mar 03, 2009
SOURCE: I have a Kenneth Cole
I have looked at the KC web site and most of the instructions don't give model numbers., so it is impossible to see if any of the instructions listed refer to your watch.
(if you go to http://www.genevawatchgroup.com/ , click on customer service and then scroll down,you will see KC instructions).
Isyour watch automatic? If it is, then it needs to be shaken (gently) from side to side for a minute or two to wind it up.
If it is a quartz type and you have pressed the winder into the home position and it still doesn't start, take it back and ask for a replacement.
Posted on Apr 17, 2011
Tips for a great answer:
Oct 13, 2014 | Kenneth Cole KC1296 Watch
Jun 24, 2013 | Kenneth Cole Watches
Aug 13, 2011 | Kenneth Cole Reaction - REACTION DIGITAL...
Mar 02, 2009 | Kenneth Cole Watches
Feb 06, 2009 | Kenneth Cole RK5034 REACTION
Jun 08, 2008 | Kenneth Cole Reaction - REACTION WIDE...
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: