Question about Maytag UMC5200AAS Microwave Oven

1 Answer

Broken rotating microwave arm - can't find part

I have a UMC5200AAS Maytag microwave.  The internal rotating arm (Brown 3 arms coming out of the center with tiny white wheels on the end of each arm) has broken.  I need a new one for my microwave to utilize its full functionality.  HELP!!

Posted by on

  • kimbstewart Feb 05, 2009

    same exact problem. need the part. please help.

  • tomshutch Feb 27, 2009

    Had microwave for just over one year and the rotating arm broke, then the microwave just quit working. Having a hard time finding replacement to fit trim kit.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 8,820 Answers

That would be the support, and you can find it by entering your model number UMC5200AAS here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Microwave sparks sounds very loud


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101
x

Apr 19, 2010 | Maytag UMC5200AAS Microwave Oven

1 Answer

Microwave not heating and giving burnt plastic smell


STOP USING IT!! UNPLUG IT!! Microwaves are inexpensive now. It will cost you more than a new one costs, to get it fixed.

Apr 02, 2010 | Microwave Ovens

2 Answers

Maytag Intellisense EQ Plus Dishwasher 6913598 972VG-0196 during the wash cycle an error message keeps coming up. arm blockage There is no blockage. I had the dishwasher on its side to...


If your model has a Lock Pad on the display and "Locked" appears there, press the Lock Pad three times quickly (within three seconds) to unlock the dishwasher and start the cycle.

Check HERE for other tips.

If none of these tips gets your dishwasher to begin filling, please contact an authorized Maytag service provider for more assistance.

Important note:
Be sure to follow specific, published user-repair instructions, such as these, when you are attempting to service or repair any part of your dishwasher. If the instructions don't make sense to you or you aren't sure how to perform them, please call an authorized Maytag service provider for assistance.

Hope helps.

Feb 12, 2010 | Microwave Ovens

1 Answer

Bottom is rusted and when i try to cook something,


Since the cavity metal of the oven is chipped or charred, it will have to be sanded smooth and clean.

Then you can apply some high-temperature appliance paint, available from places like Wal-Mart or Lowe's.

If it is not repaired, the rust will worsen until the cavity is damaged beyond repair.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jan 29, 2010 | Maytag UMC5200AAS Microwave Oven

1 Answer

CHANGING THE MAGNETRON


How do you change the magnetron on your own microwave?

Dec 23, 2009 | Maytag UMC5200AAS Microwave Oven

1 Answer

Kenmore microwave 721.80803401 rotating table pops up and stops turning.


I would bet the arm ("ring assembly") is either worn or warped from heat? and is not meshing well with the motor shaft or glass tray.

That is part number 4351W1A003A and you can get it for only $6.30 (compared to over sixteen via Sears) from Tritronics.

The motor is part # 6549W1S018C and if it's the culprit, you can get that for $24.84 from Tritronics, compared to almost thirty-two from Sears.

You should look again and see how loose the arm is on the shaft and which might be worn or warped or out of perpendicular. I think that one of these is the problem.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 21, 2008 | Microwave Ovens

2 Answers

Microwave rotating assembly jumps up and stops turning.


I would bet the arm ("ring assembly") is either worn or warped from heat? and is not meshing well with the motor shaft or glass tray.

That is part number 4351W1A003A and you can get it for only $6.30 (compared to over sixteen via Sears) from Tritronics.

The motor is part # 6549W1S018C and if it's the culprit, you can get that for $24.84 from Tritronics, compared to almost thirty-two from Sears.

You should look again and see how loose the arm is on the shaft and which might be worn or warped or out of perpendicular. I think that one of these is the problem.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 21, 2008 | Microwave Ovens

1 Answer

Maytag Microwave


Mine is a model UMC5200AAW. Same problem as above, no power. Is there a reste button?

Nubi541

Oct 07, 2008 | Maytag MMV5207A Microwave Oven

1 Answer

Microwave


That's usually a bad magnetron. This one has a 5-year warranty on the magnetron, so you should only have to pay for labor to get it replaced. I would call Maytag at 800-688-1120.

Jan 06, 2007 | Maytag UMC5200AAS Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...