Closed lap top and a while later open up and screen would nnot come up. tried turning off power/ took batterie out/ held power switch down for 10 secounds and still no luck?? Had this happen before and was told it was in hibernation but tried to bring out as directed and nothing? Help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
press the fn key on laptop hold it down and then press the power key on the laptop. once u see any display on the screen you will get some tests running on the screen. The system will show you the error message which u need to note down. else you can do a Flea Power on your laptop. Remove the adapter and the battery and then press the power button and hold it down for 30 seconds then connect the battery and adapter back and try to turn on the laptop. See if the magic works for you
the best thing to do is to get the help of a qualified technician(better go to a toshiba service centre) they will help you with this. try removing the battery after turning off the computer and removing the power supply.reinsert the battery and turn on th notebook. it should work fine. else contact the technician.
If you have tried a new power supply and taking out the battery and it still won't start, then the problem is with the power management system on the motherboard. This means that the motherboard will have to be replaced. Check into your warranty, being that it's only 10 months old, it should still be under warranty. If so, then get it to them to be fixed asap, before they decide your warranty doesn't cover it.
can you access the bios if so reset to default and restart if you cant start up to as far as you can get then try a soft boot (ctl,alt,del all together at once) failing this you could try insert system disk and try to reboot and see if it try to install new copy.if you can get to any of these positions you can reset bios by unplugging and reconnecting rtc,this requires dismantling laptop,i may have service repair manual for your pc ,have to check