Question about Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

1 Answer

Dishwasher won't start up

I have a Frigidare model: GLD2150RCS1 Gallery Series dishwashers that is only three years old and this morning it wouldn't start up. I have the breakers and they wern't thrown. Is there anything else that has given this model trouble without any warning at all. There is nothing blocking the spinners and the door snaps as usual when you shut it.

Posted by on

  • mliapis Feb 07, 2009

    2 years old..

    went to use it nothing...breakers are good..water supply good

    out of nowhere it just quit

  • Anonymous Feb 08, 2009

    makes a clunk like it wants to start but wont

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

This could be a problem at the electrical hook up ,also could be a open door switch or if there is 115 volts to the control board and nothing happening then you need a board.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get my Frigidaire Dishwasher 900 series to start?


Sounds like you have a bad door switch. You might also have a motor that tends to freeze or lock up. It could possibly be a bad motor capacitor too. Does this help?

Mar 18, 2015 | Frigidaire Gallery Dishwashers

1 Answer

The Clean light on my frigidaire gallery dishwasher is on continuously. The dishwasher will not start. Its over 10 years old.


the problem is in the pcb board which will have to be replaced and cost a few hundred dollars. considering that machine is only designed to last 7 years i would just replace the entire machine.

Sep 26, 2013 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

Reset frigidaire electrolux dishwasher GLD2150RCS1


Hello - You may reset the dishwasher by either unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes. If it proves to be ineffective and the dishwasher does not start, may possibly have a faulty door switch.

Nov 27, 2012 | Electrolux Dishwashers

1 Answer

My dishwasher by Frigidaire Gallery Professional Series Model gpd8998jc0 has all lights flashing and could not be started. I smelled burning from dishwasher. Could it be motor burning?


Hello,

it could be the motor depending on where it's coming. You can remove the lower panel, there are only two screws that hold it on. Look under their and inspect the motor.

Another part that could cause this issue is the mother board. The board is located behind the control panel. Remove the screws around the door frame to loosen and remove the control panel.

On most of these you also have to remove the plastic shielding that cover the control board. To do so remove the three or four screws that mount the board down.

Often these control boards will burn and create a smell like this.

Let me know.

Mar 26, 2011 | Frigidaire Professional Series 24 in....

1 Answer

Started to get a clicking noise from the electic panel of my Frigidare PLDB998 dishwasher for a few loads and then it went dead. Its only a few years old


Did you ever find a solution? I have what sounds like the same problem. The time keeps ticking down but it flashes between CL and the time while the clicking sound is going, and it sometimes make a clunking sound while this is happening as well.

Sep 15, 2009 | Electrolux Frigidaire Professional Series...

1 Answer

Frigidare dishwasher


can you give me the exact model # on your dishwasher and i will check for you.

Sep 03, 2008 | Frigidaire 24 in. FDB1050REC Stainless...

2 Answers

Frigidaire gallery series FDB125ORES1 wash light blinking, dishwasher won't cycle on.


The lights flashed on mine for about three months before smoke started to pour out of it during the drying cycle. It nearly burned my house down.

Aug 14, 2008 | Frigidaire 24 in. FDB1050RE Built-in...

1 Answer

Frigidare Gallery dishwasher GLDB958JS0


Fault in the touch pad-replace the touch pad.If problem continues you have to replace the control board.

May 25, 2008 | Frigidaire Dishwashers

Not finding what you are looking for?
Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Carmen Mikulic

Level 2 Expert

409 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...