Question about HP LaserJet 1010 Printer

Open Question

My HP printer puts blank pages between every document

I have a HP Photosmart c7280 All-In-One printer that puts blank pages between each document in a print job. I suspect it has something to do with the wireless setup because when I plug the printer back to the USB connection it works fine. I have 3 computers and they all do the same way on wireless. 2 of my machines are 32-bit systems and one is a 64-bit but they all do the same way. I checked in my printer properties icon under the advanced tab to make sure it wasn't set to add seperator pages and it wasn't. I'm pretty new at this wirless networking gig....I have never tried this wireless stuff until I put my router in and I just turned the wireless function on yesterday on my printer.

Posted by on

  • 3 more comments 
  • ansley32 Jan 19, 2009

    I am having the same problem on my C7200 Photosmart All-in-one printer.

  • ange dana Feb 06, 2009

    I am having the same problem on my HP 7280 also. There is not even a tab or option to turn the separator page on or off. Please help!

  • alex419 Feb 25, 2009

    .., I also get the same issue using the HP Photosmart 7200 series.

  • Anonymous Mar 04, 2009

    i have the same problem although with laserjet 1010

  • neronarc May 11, 2010

    What are the distance of each computer from the router? it may seemed intermittent on the router since the three laptops are having the same issue ...what is the brand of your router? we can back up the router configuration and hard reset the router in that way we can tweak the signal from it.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

PeteG0429
  • 34 Answers

SOURCE: printer spits out blank page

This should solve this problem if you haven't already. It's real simple.


Posted on Apr 02, 2009

  • 93 Answers

SOURCE: HP 7410 off line with Vista & HPM8000 computer

Once right click on the printer icon and make it online and then clear the print que and then download and install the patch from the below webpage.

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-54112-1&lc=en&cc=us&dlc=en&product=391194&os=2093&lang=en

After installing the patch restart the computer and check for the result.

Posted on Jun 19, 2008

XeroxHelp
  • 4 Answers

SOURCE: HP Photosmart Printer, Mac won't recognize with USB

Sounds like their is not communications between your printer and computer. Could be a bad USB cable - swap out and see if that fixes it. If not it could be a faulty USB port on the computer or printer. You can check the computer USB port by connecting another device, but there is no way to check the HP's USB port. I would also check printer USB port for dust bunnies! If you're not able to resolve, I think it is time for another printer.

Posted on Feb 17, 2009

  • 1 Answer

SOURCE: HP Photosmart C6350 prints more copies then asked for

How do I turn off the ink level system on my HP all in one C6350 printer?

Posted on Jan 18, 2010

pineworks
  • 4041 Answers

SOURCE: This is for an HP Photosmart 3310 all in one. The

Reset the product:

  1. Without turning off the product, disconnect the USB cable from the rear of the product.
  2. Remove the cartridges from the product.
  3. Wait for the 'Insert Cartridges ' message to display on the control panel.
  4. Disconnect the power cord from the back of the product.
  5. Wait 60 seconds.
  6. Reconnect the power cord. If the product does not automatically turn on, press the Power button (c01602202.gif ).
  7. Reinsert the cartridges, and then close any open doors on the product.
  8. If you receive a prompt to print a calibration page, do so.
  9. Reconnect the USB cable to the rear of the product, and then try printing again.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printed colors are not the same as document (I


you need to make sure all your ink cartridges are full, if they are, I would take them out and put them back in and rerun alignment

Jun 28, 2010 | HP Photosmart C7280 Printer

1 Answer

I have an HP C7280 AIO printer. Everytime I print, it always form feeds a blank page bewteen each printed page (print page 1, form feed a blank page, print page 2, form feed a blank page, and so on).


Generally, there are printer set up programs that will let you chose to put a blank sheet or to not do that. If you have a disk or manual, look for the set up utility and go thru the tabs to find paper handling or something similar to that. There should be a check box you can clear to stop the blank page.

I hope that this information was helpful. Have a great day.

Brian

Jan 24, 2010 | HP Photosmart C7280 Printer

3 Answers

Blank sheet before each printed page


Here's a simple solution. It's easy! Instead of it being the C7280 - it's the C7250 - should be the same driver however. Good Luck!


Aug 02, 2008 | HP Photosmart C7280 Laser Printer

Not finding what you are looking for?
HP LaserJet 1010 Printer Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...