Question about Xerox DocuColor 12 Printer

1 Answer

Macintosh hello! could you please help me install dc 12 to iMac (v10.5.5)?

Posted by on

  • 1 more comment 
  • grafistikes_ Nov 25, 2008

    hello!!


    it is a fiery x12.


    thanx in advance!

  • grafistikes_ Nov 26, 2008

    Hello again! 
    Firstly, thank you very much for your help.


    2 days ago, i have installed the driver and done all these instructions and my dc12 works and prints properly!


    BUT, i don't have (or at least i can't find it in my mac) the software where from i can make settings for my printer. For example, paper weight, paper source, type of paper etc. I mean, shouldn't the driver have a program from which you can make all these settings?


    thanx again!!!

  • James May 11, 2010

    What DFE do you have attached to the DC12?

    Is it a Splash or Fiery

    Fiery EX12, X12e, X12, XP12

    Splash G610,620,630,640

    -

    Let me know I may have a work around for you that may work.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Here is the link to the site where you can download the driver for you DC12 the first one in the list is specifically for an Intel Mac (which is what you need)

NOTE: You may receive inconsistent output if your DC12 is NOT at system software version 1.5 SP2, however it will still work.

http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=DC12CP&ripId=XRIP_Fiery_X12&Xtype=download

I have also included the instructions on how to add the printer to your Mac 10.5 OS

See below:



These instructions assume that TCP/IP is configured on the Macintosh and on the printer. If the printer does not have an IP address, contact your System Administrator to provide one, or to perform this solution if you do not have rights to install a print driver.
This solution assumes that the correct print driver for this product and the operating system being used has been downloaded and extracted to a known location on the hard drive. If necessary, click on the [Drivers & Downloads] link under the Product Resources section on this window to download a print driver.
To install the print driver:

  1. Browse to the location of the downloaded print driver.
  2. Double-click on the driver file. The contents of the file will be displayed.
  3. Double-click on the [Print Driver] folder. The contents of the folder will be displayed.
  4. Double-click on [OSX Installer]. The Authenticate window will be displayed.

    NOTE:A warning message may be displayed that states “OSX Installer is an application downloaded from the Internet.” Click [Open] to open the installer and continue.

  5. Enter the username and password in the fields provided, and then click [OK]. The Software License Agreement window will be displayed.
  6. Read the agreement, and then click on [Accept] to continue. The OSX Installer window will be displayed.
  7. Click on [Install]. The driver will install. When the installation is complete, an ‘Installation was successful’ message will be displayed.

    NOTE: A Select Printer Version to Install window may be displayed. Click [Fast] to continue the install. When the installation is complete, an "Installation was successful" message will be displayed.

  8. Click on [Quit] to complete the installation.
To add the printer:
  1. Click on the [Apple] icon in the upper left corner of the toolbar, and then select [System Preferences] from the menu. The System Preferences window will be displayed.
  2. Double-click on [Print and Fax] folder. The Print and Fax window will be displayed.
  3. Click on the [+] button located on the left side of the window below the Printersfield. A new window will be displayed.
  4. Click on the [IP] icon at the top of the window, and then select [Line Printer Daemon - LPD] from the Protocol pull-down menu.
  5. Enter the IP address of the printer in the Address field.
  6. Enter a queue name of Print, Hold, or Direct in the Queue field. The queue name must be entered in lower case letters.
  7. If necessary, enter a name for the printer in the Namefield.
  8. Select [Select a driver to use…] from the Print Using menu. A list of printer models will be displayed.
  9. Select the correct printer model from the list, and then click on [Add]. The Installable Options list will be displayed.
  10. Select the installable options that are present on the printer, and then click on [Continue]. The printer will be displayed in the Printer List field.

    NOTE:If you are not sure what the options are, contact your System Administrator.

    The default printer is indicated in the Printer List field. The last printer added will automatically be the default unless otherwise changed.

  11. Click on the red [X] button in the upper, left corner to close the Print and Fax window and return to the desktop.
I hope this gets you where you need to be with your DC12. :o)

Posted on Nov 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot add r1800 to Leopard


Important OS X pre-installation instructions: The Macintosh OS X driver found on the CD provided with your product is not intended for use with Intel-based Macintosh computers. If you have already installed the OS X printer driver provided on your product CD, please follow these important instructions before installing the "epson11769.dmg" file:
  1. Open the OS X "Printer Setup Utility".
  2. Select the "Printer Setup Utility" tab and click "Reset Printing System...".
  3. Click the "Reset" button.
  4. Restart your computer.
  5. Install the downloaded "epson11769.dmg" file.
Installation instructions (some of the following steps may not be necessary):
  1. Download the file.
  2. Double-click the downloaded file to create a disk image on your desktop.
  3. Open the disk image.
  4. View the included "Readme First.pdf" document for important information.
  5. Double-click the installer icon to begin the installation
link to driver

disconnect usb, delete all old attempts, do not connect untill prompted by install

Dec 04, 2007 | Epson Stylus Photo R1800 InkJet Printer

1 Answer

How to install an Epson style photo R380 in Apple iMac 17"", 1.83GHz Intel CoreDuo


Go to http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=72086&prodoid=63059189&infoType=Downloads&platform=Macintosh
Select Drivers and Utilities Combo Package. Once downloaded open up the disk image or .dmg file and double click on the Epson Installer then a w izard will install the appropriate files in the appropriate places. Then go to system preferences and select "Print and Fax" and select your printer plus the appropriate drivers.

The documentation for this printer can be found at http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Doc&oid=72086&prodoid=63059189

Hope this helps.

Dec 17, 2010 | Apple iMac 17 inch 183GHz Core Duo Logic...

1 Answer

A printer error has occurred. See your documentation


What are the system requirements for using this printer? A: PC Compatible Requirements
- An IBM (r) compatible PC with at least a 486/66 MHz (for Windows 98) or Pentium (r) 133 MHz (for Windows 2000) processor (Pentium or higher processor recommended)
- Microsoft (r) Windows 98 or Windows 2000
- At least 16MB (for Windows 98) or 32MB (for Windows 2000) of RAM (32MB for Windows 98 or 64MB for Windows 2000 recommended)
- 50MB of free hard disk space (100MB or more recommended)
- VGA or better display adapter and monitor
- CD-ROM or DVD drive for installing the printer software
- USB connection: a computer running Windows 98 or Windows 2000, with a Windows-compliant USB port and a shielded USB "AB" cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB cable-especially a cable more than 6.5 feet (2 meters) long-may cause the printer to malfunction. Apple Macintosh Requirements
- An Apple (r) iMac (tm) series or Power Macintosh (r) G3 or G4 with USB port
- For iMac: Mac (r) OS 8.5 or later (Mac OS 8.5.1 or later recommended)
- For Power Macintosh G3 or later: Mac OS 8.5.1 or later If your iMac is running OS 8.1, you need to upgrade your operating system before installing your printer software. To find out which operating system your iMac is running, select About This Computer from the Apple menu. If you're running OS 8.5 or 8.5.1 on your iMac, Apple recommends that you install iMac Update 1.1. Download the update for your system from Apple at http://asu.info.apple.com. Contact Apple if you have problems installing an update.
- 16MB of available RAM (more recommended)
- 50MB of free hard disk space (100MB recommended)
- VGA display or better
- CD-ROM or DVD drive for installing the printer software
- A shielded USB "AB" cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB cable-especially a cable more than 6.5 feet (2 meters) long-may cause the printer to malfunction.

Oct 27, 2010 | Epson Stylus RX580 InkJet Photo Printer

1 Answer

I have and I mac and I cannot run any exe files!!


Files with the suffix ".exe" are executable only under the Windows operating system. If you have an Intel iMac you can run Parallels software and actually install Windows side by side with the Mac OS and then be able to run ".exe" files in their native environment. Generally, downloadable program files for Macintosh have a ".dmg" suffix which is a disk image file which contains the actual program. After mounting the disk image on the desktop (by double-clicking) you can then copy the program file inside it directly to your hard drive via click&drag and then run it from the hard drive.

Feb 07, 2010 | Symantec Norton Utilities For Macintosh...

1 Answer

Macintosh HD will open from desktop icon but won't stay open. I can access all but applications files using finder but Macintosh HD closes when I click on applications. I recently transferred files from...


Sounds like you may have some permissions issues - I would suggest sticking in the OS disc that came with your iMac, restarting, and holding the "C" key when you hear the chime - this will make it boot off the CD. Once booted from it, go to Tools->Disk Utility, choose your disk, and do "Repair Permissions". Once that is done, you can quit the installer and restart. If that doesn't work, the next step I would recommend is running DiskWarrior, which is $99 - this is like an industrial permissions/hard drive directory repair disc, used by many professionals. If that doesn't solve it, you will likely have to back up your user data and do a fresh install of the OS from the discs you have. Good luck!

Nov 05, 2009 | Apple iMac 17" MA199LLA Desktop

1 Answer

INSTALLING XEROX DC12 TO iMac (v10.5.5)


what kind of imac you have is a splash cerver? 

Nov 22, 2008 | Xerox DocuColor 12 Printer

4 Answers

Error 3-397 Xerox DC 12


Hello, I have a Xerox DC 12 and i receive the error 3-308

Someone can you help me or information about me ???

Thank you.

Feb 22, 2008 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Xerox DocuColor 12 Printer Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...