Question about Audio Players & Recorders

Open Question

FTA Digital Satellite TV SABC 1,2,3 & ETV

Hello!
I have FTA Digital Satellite Decoder with (Ali Chip). I am receiving many channels but not SABC 1,2,3 & ETV.
I have seen exactly the same Decoder/s and many other FTA Decoders which pick up SABC 1,2,3 & ETV.
I would appreciate help on how to programme FTA Digital Satellite Decoders to get SABC 1,2,3 & ETV and any other scrambled channels if possible.
Thank You
Kind Regards
Aslam Seedat

Sorry I could not find the right PRODUCT CATEGORY and was unable to find FTA Satellite TV

Posted by on

  • Ba sugar Mar 28, 2009

    my decorder can not pick up sabc 1,2,3,and ETV

×

5 Suggested Answers

  • 1153 Answers

SOURCE: satellite receiver not responding

was you satellite tampered with? If so then it could be an eeprom jam!

Posted on Sep 04, 2007

  • 1153 Answers

SOURCE: satellite receiver not respond

Search internet for JTagging sonicview receiver. You will need special equipment.

Posted on Sep 04, 2007

  • 1153 Answers

SOURCE: I can't turn on my satellite receiver

Is this a Pansat receiver? If so or not then you will have to find out about Jtagging your receiver. Maybe because bad script or just cloning you have to jtagg first then rescript.

Posted on Sep 21, 2007

SOURCE: DTH/DVB satellite receivers

firmware upgrading

Posted on Oct 31, 2007

  • 12 Answers

SOURCE: starview digital receiver

Visit www.starviewrepair.co.uk they do free diagnostics if you send them your starview cable receiver

Posted on Feb 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I CHANGE FROM ANALOG TO DIGITAL ON AN LG LD32 PLASMA TV?


I havDUEL VIEW DSTV and it went on the blink, I kinda fixed TV1 but on the second TV which is LG after I AUTOMATICALLY RESET IT shows only 4 channels sabc 1 2 3 and etv, so now i cant see dstv and i cant find a channel for it, how do i get it back as it was working fine on tv 2?

May 07, 2011 | LG Televison & Video

Tip

How to record a program you are watching on your cable satellite receiver.


Hello,<br /><br />Most of the time we watch TV programs with our cable satellite receiver/decoder. And sometimes we would love to record these programs so that we can watch them again. You can learn how to record your TV program while you watching a TV program. <br /><br />All you will be needing is a DVD recorder or VCR (Video cassette Recorder). It all depends on the one you prefer.<br /><br />There are two methods of doing this connection. 1. is RF connection and the other is RCA. But I will start with the RF connection method;<br /><br />This is how is works. Get a RF cord, check the back of your TV, you would see RF in, connect the RF into TV in, then connect the other part to RF Out at the back of the Cassette or DVD Recorder.<br /><br />Turn the Cassette or DVD Recorder and the TV on. Go to Channel 1 or any channel on the TV, search the TV stations automatically or manually in order to get a display of the Cassette or DVD Recorder on the TV. To easily get the Cassette or DVD Recorder's station, play a movie on the Cassette or DVD Recorder while you search for the station. Once you see the display of the movie on your TV, you would easily know that that's the Cassette or DVD Recorder station. <br /><br />Once you have gotten a display from the Cassette or DVD Recorder, save the channel on the TV.<br /><br />Then get another RF cord, connect it to "RF out" at the back of the Satellite/cable decoder/receiver and the other part to "RF in" at the back of the Cassette or DVD Recorder.<br /><br />Now with the Satellite/cable decoder/receiver turned on and the Cassette or DVD Recorder also turned on, press the Cassette or DVD Recorder's channel, you should find search. Scan for channel/stations on the Cassette or DVD Recorder just like you did on the TV and you will find a display of the Satellite/cable decoder/receiver showing on the TV via the Cassette or DVD Recorder. Note that on some Cassette or DVD Recorder, you will have to select "Source" to RF before you can get a display of the channel.<br /><br />Now since the Satellite/cable decoder/receiver program is now showing via the Satellite/cable decoder/receiver, insert a black disc or cassette into the Recoder and press record. The Satellite/cable decoder/receiver programs showing on the TV via the player will be recorded and that would be all.<br /><br />For some recorders that has internal hard drive, you can just press record without inserting a blank disc......<br /><br />USING RCA CONNECTION METHOD.<br /><br />You could also achieve this by using a RCA (yellow, red and white cord).<br /><br />The connection procedure is the same with the RF explained above.<br /><br />Connect the Recorder to the TV. That is, from "Video and audio Out" of the recorder to "video and audio in" of the TV accordingly. Press AV or source on the TV to confirm that there is a display from the recorder on the TV.<br /><br />Now connect the RCA cord to "OUT" from the Satellite/cable decoder/receiver to "IN" at the back of the Recorder.<br /><br />Then, press source on the recorder to "INPUT" (RCA) and the Satellite/cable decoder/receiver's program will automatically display on the TV. <br /><br />While the Program is being displayed on the TV via the recoder, insert a blank disc and press record on the player and it will automatically start recording. You will see the record or record symbol while the recoding is in progress.<br /><br />I hope you understand the above. Please follow steps closely and you won't have any problems.<br /><br />Good luck.

on Mar 09, 2011 | Televison & Video

1 Answer

How to unlock e.tv in mytv decoder and how to open scrambled channels in DStv?


How to unlock etv and scrambled channels on Mystrong Decoder

Nov 15, 2010 | Televison & Video

1 Answer

Where is the cable hook up on the tv?


This plasma is only a monitor meaning they do not have a tuner, so it doesn't have a cable hook up. If you want to receive over the air channels, if you live in the USA, you will need a digital converter decoder or if you have cable/satellite suscription you will need a cable/satellite decoder box to receive the channels.
The way to connect any of the mentioned devices to your plasma is to use the yellow, red and white cables to the input of the TV and select input 1 or video 1.
If you live where you can still receive over the air analog channels, a VHS should work.
Let me know if you require further assistance.

Aug 13, 2010 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

I have Humax IR-ACE II It hangs when I reset


E-66 FTA services are blocked Your subscription has expired and your decoder has blocked all channels including free to air channels To renew your subscription call your dealer or customer service, see details on ART Info Channel

Mar 15, 2010 | Televison & Video

1 Answer

Fortec Star upgrade


Hello Keithclu,
Sorry for the late response.
I'm afraid that there aren't any known upgrades to decode kryptoworks encryption, besides this STB has only 1Meg flash memory and can only be use to receive FTA signals.

Sep 10, 2008 | Fortec Star Lifetime ULTRA

3 Answers

Re-programming for Optus D2 satellite


what brand of set top box do you have?

Jan 24, 2008 | Coship CDVB2000E

2 Answers

Using an old SKY digibox for Freeview ?


you have a smartcard for that box ?, cause without that card, you won't see any of the channels at all.

Nov 11, 2007 | Televison & Video

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

100288 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

The Knight
The Knight

Level 3 Expert

71037 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...