Question about Sony DVP-NS400D DVD Player

Open Question

Problem s SONY DVP-NS400D

Dobrý den. Prosím o pomoc.Mám Sony DVP-NS400D a přestalo mi přehrávat DVD. CD s muzikou přehraje ale po vložení DVD píše vložte disk tak že ho nenačte. Můžete mi prosím poradit co se stalo.Omylem jsem asi něco vymazal, proto že to před tým šlo.Děkuji za pomoc. Jarda.

Posted by on

3 Suggested Answers

drlalitv
  • 488 Answers

SOURCE: Sony DVP-NS400D

try this:
Multi-Region: 
• Turn On the unit with the remote controller 
• Wait until "no disc" appears in the unit's display 
• Press Pause, 3, 1, 4, 1, 5, 9 
• The word "CODE" should appear in the display 
• Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on 
• Again, within 5 seconds, press Pause and Power
hope it helps!

Posted on Oct 31, 2008

kerguney
  • 575 Answers

SOURCE: sony dvp-ns400d player won't recognize dvd's

Hello,
This DVD player unfortunately does not support most of the Copied DVD /CDs.
it works stemless with only genuine / original CD and DVDs..
If your DVD or CD originally recorded by manufacturers but still can not read ,
than I recommend you to obtain and apply it to clean your laser eye of the DVD player.

The second problem is related with
factory locked multizone feature..
on the rear of the player will be a region code plate with a picture of a globe and a
number next to it.
If you DVD disc does not have the same ZONE number ,it wont work.
But in order to convert your DVD to a multizone you need to make some additional adjustment.
Hope it will solve your problem.otherwise ask me to give you more on unlocking multizone feature.
Please remember to vote me too..
Regards

Compatible disc formats: DVD, CD, CDR, CDRW, Video CD

Posted on Nov 16, 2010

kerguney
  • 575 Answers

SOURCE: dvd tray will not open

In order to open the disc tray.apply one of the following solutions;
--- Turn off the DVD player. Unplug the power cord from the AC outlet for 30 seconds.
Plug the power cord back into the AC outlet. Try to open the disc tray.
--- If the disc tray still does not open, simultaneously press the POWER + STOP + EJECT buttons.
--- If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons ,
--
- If the disc tray still does not open simultaneously press the RETURN + ENTER+ POWER buttons.
If the problem is still unresolved, a service may be required.
good luck...

Posted on Nov 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connected speakers to the back {5.1} but still no sound


Hello ,
The 5.1 connections on the back of DVD player are for either <surround system amplifier< or
<5,1 featured Receivers..<
You need to amplify the signal coming from DVD player output plugs..
Thus,those are not for Speaker output.
If and When you connect your DVD player to a receiver ,you will get full sound...
I hope it helps to sort out your problem..
Thanks for rating me..Regards.

Oct 19, 2010 | Sony DVP-NS400D DVD Player

1 Answer

How do I unlock my Sony DVP - NS330 player, bought


Codes for-
Sony DVP-NS300, Sony DVP-NS305, Sony DVP-NS400D, Sony DVP-NS700, Sony DVP-S330, Sony DVP-S335, Sony DVP-S360, Sony DVP-S336, Sony DVP-S525D, Sony DVP-S530D, Sony DVP-S535D, Sony DVP-S536D, Sony DVP-S725D, Sony DVP-S735D
Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilà. If you don't have good results, disconnect the equipment and repeat.
Or
Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8
Or
Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.
Yours is not listed but these may be worth a go.
or try http://www.haldigital.com/hp/dvd.htm

May 15, 2010 | Sony DVP-NS330 DVD Player

1 Answer

Can i play DVD+R DL on this player


Hello,
This DVD player unfortunately does not support most of the Copied DVD / CDs.
it works stemless with only genuine / original CD and DVDs.. ,
DVD+R or DVD-R is related with recording technic only,nothing to do on playback..
This DVD player's problem is related with copied DVDs..

Manufacturers spec for Compatible disc formats: DVD, CD, CDR, CDRW, Video CD

Hope it will solve your problem.
Please remember to vote me too..
Regards

Dec 08, 2009 | Sony DVP-NS400D DVD Player

1 Answer

My player wont read any CD at all, or DVDs


Hello,
This DVD player unfortunately does not support most of the Copied DVD /CDs.
it works stemless with only genuine / original CD and DVDs..
If your DVD or CD originallly recorded by manufacturers but still can not read ,
than I recommend you to obtain and apply it to clean your laser eye of the DVD player.
Hope it will solve your problem.
Please remembr to vote me too..
Regards
Compatible disc formats: DVD, CD, CDR, CDRW, Video CD

Sep 28, 2009 | Sony DVP-NS400D DVD Player

1 Answer

Sony dvp-ns400d player won't recognize dvd's


Hello,
This DVD player unfortunately does not support most of the Copied DVD /CDs.
it works stemless with only genuine / original CD and DVDs..
If your DVD or CD originally recorded by manufacturers but still can not read ,
than I recommend you to obtain and apply it to clean your laser eye of the DVD player.

The second problem is related with
factory locked multizone feature..
on the rear of the player will be a region code plate with a picture of a globe and a
number next to it.
If you DVD disc does not have the same ZONE number ,it wont work.
But in order to convert your DVD to a multizone you need to make some additional adjustment.
Hope it will solve your problem.otherwise ask me to give you more on unlocking multizone feature.
Please remember to vote me too..
Regards

Compatible disc formats: DVD, CD, CDR, CDRW, Video CD

Feb 25, 2009 | Sony DVP-NS400D DVD Player

1 Answer

Sony DVP-NS400D


try this:
Multi-Region: 
• Turn On the unit with the remote controller 
• Wait until "no disc" appears in the unit's display 
• Press Pause, 3, 1, 4, 1, 5, 9 
• The word "CODE" should appear in the display 
• Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on 
• Again, within 5 seconds, press Pause and Power
hope it helps!

Oct 31, 2008 | Sony DVP-NS400D DVD Player

1 Answer

Dvd tray will not open


In order to open the disc tray.apply one of the following solutions;
--- Turn off the DVD player. Unplug the power cord from the AC outlet for 30 seconds.
Plug the power cord back into the AC outlet. Try to open the disc tray.
--- If the disc tray still does not open, simultaneously press the POWER + STOP + EJECT buttons.
--- If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons ,
--
- If the disc tray still does not open simultaneously press the RETURN + ENTER+ POWER buttons.
If the problem is still unresolved, a service may be required.
good luck...

Apr 06, 2008 | Sony DVP-NS400D DVD Player

Not finding what you are looking for?
Sony DVP-NS400D DVD Player Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

148 Answers

Are you a Sony DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...