Question about Vtech VT2600 Additional Handsetfor VT2651/VT2656 Cordless Phone

1 Answer

Cannot reregister phones to the base. - Vtech VT2600 Additional Handsetfor VT2651/VT2656 Cordless Phone

Posted by on

  • taryn964 Nov 22, 2008

    Does ANYONE answer these? My handset will not register to base after a power surge.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your base is a VT2651:
1) take phone off of the base's cradle.
2) enter **335782 on the keypad
3) phone beeps
4) remove all batteries from handsets.
5) reinstall battery in 1st handset, and enter the code number for the base unit (sticker on bottom of base). First handset will be set to phone 1
6) repeat step 5 for all other handsets.

If your base is a VT2656, there is no keypad on the base. I don't know the trick to reregister the handsets. I wish I did, since that is the problem I am having.

Posted on Jan 22, 2009

3 Suggested Answers

  • 1 Answer

SOURCE: Cordless phones will not connect to base.

I just had the same problem and tried several things with no results. Then, I figured I had tried everything else so I just unplugged the battery pack, set the phone down for 25 minutes and then plugged the pack back in. Phone worked again after that.

Posted on Nov 14, 2006

  • 2 Answers

SOURCE: No Link to Base

to re-register the phone, hold down the "handset locator" button on the base untill he "charge" light flashes. then, on the phone, hold down the flash/call waiting button until the LCD screen says "handset registering." if after it registers it says "error!!!" then retry. that is what it says in the instructional booklet, but i have not done this successfully. mine keeps saying error.

Posted on Dec 22, 2007

  • 1 Answer

SOURCE: how do I reregister a

Hold at the same time on the base the button above the red light and the # on the phone for a few sec. This will reregister the phone.

Posted on Dec 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone is not taking calls from the base unit


It is not receiving phone calls or the intercom to the handset does not work? Try reregistering the handset. You must be at the base to do this.

Jan 27, 2015 | EnGenius DURAFON1X DuraFon 1X System Phone

1 Answer

Reset base to nortel cics t7406


A base can be reset to the phone system by removing the power for 30 seconds to one minute. The handsets are another matter as they will need to be deregistered and reregistered with the base. It is best to have a manual to do this.

Dec 12, 2013 | NorStar T7406 Cordless Phone

1 Answer

My KX-6051B will not reregister when I go through


hi,

Follow the instruction below to register the handset to base


ca2dc17.jpg
Thanx

Jul 21, 2010 | Panasonic Phones

1 Answer

How do I reregister a handset phone to the base phone? I changed the battery and now it won't get a dial tone.


Hold at the same time on the base the button above the red light and the # on the phone for a few sec. This will reregister the phone.

Apr 13, 2009 | Uniden Phones

1 Answer

New phone base works but extra phone doesnt


Hello, 1st step would be to make sure the phone still registered, mines keeps unregitering and it works after I reregister it, hope that helps.

Dec 03, 2008 | General Electric 28223EE2 Twin Cordless...

2 Answers

Cordless GE 26928GE2-B


there should be some problem with the connection antenna

Sep 02, 2008 | Uniden Cordless Phone

1 Answer

Panasonic cordless phone


You can get yours repaired at www.cordlessrepair.com , and if you send the handsets they will reregister them to your fixed base at no extra charge.

Feb 03, 2008 | Panasonic KX-TG5632 Phone

3 Answers

EnGenius DuaFon 1X


Registration:
a. Press MENU-6 to enter the registration mode
b. Press and hold the base’s Registration (REG)
button for 2 seconds until 4 LEDs light up. (Located on the base where you plug in the phone jack)
c. Press handset key “1”, this completes the
registration process. When you register the
handset to BASE 10, the base will assign a
handset ID between 11 and 19. The assigned ID
will be displayed on the handset LCD, indicating
successful registration.
d. Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID
11 and 12, which gives them administrator
privileges.

Jan 04, 2008 | EnGenius DURAFON1X DuraFon 1X System Phone

2 Answers

How to REregister handsets


You can unregister your phone without being in the cradle, but to re-register them, just put them back in the cradle.  After being unregistered, they will automatically re-register once they are put back in the cradle of the main base.  Try setting them back in the base cradle to re-register, and hopefully that will work for you.

Dec 01, 2007 | Uniden TRU9480 Cordless Telephone

2 Answers

Cordless phones will not connect to base.


I just had the same problem and tried several things with no results. Then, I figured I had tried everything else so I just unplugged the battery pack, set the phone down for 25 minutes and then plugged the pack back in. Phone worked again after that.

Oct 09, 2006 | Sony SPP-S2730 Cordless Phone

Not finding what you are looking for?
Vtech VT2600 Additional Handsetfor VT2651/VT2656 Cordless Phone Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Phones Experts

kakima

Level 3 Expert

96627 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Vtech Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...