Question about Uniden WNR2304P 802.11b Wireless 4-Port Router with Wireless PCMCIA Network

1 Answer

I have a buffalo wireless router, and cant connect it properly, i put the cd into my pc to tell me how to connect everything and it doesnt work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Hi,
After connecting your router hardwired.. do the ipconfig in the command prompt window... make a note of your default gateway...It should be as 192.168.1.xxx Enter this no... in the address bar in Internet Explorer... Access the Modem... Try to configure it with the username and the password provided from your ISP, eg bell, verizon, primus etc..
this is the manual installation of your wireless router.. make sure that the modem is in the bridged mode or DHCP mode...
was i helpful?

Posted on Nov 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant connect i-pad2 to buffalo


Buffalo Technology WHR-G54S Wireless Default IP, Default Username, Default Password


Reset WHR-G54S by holding RESET down while powering it on. Hold 30 seconds, then remove power

Nov 01, 2011 | Buffalo Technology WHR-G54S Wireless...

2 Answers

I would like to put a password on my moden but how plz tell?


Hello and welcome to FixYa;

connect to the buffalo router via an ethernet cable.. then.


click this link

192.168.11.1

(if link isn't working, copy and paste 192.168.11.1 in a new tab in your browser)

Basic Settings

Wireless

Wireless Encryption (WEP/TKIP/AES)

select TKIP or AES. or you can

Hit Advanced button at top right of HOME page.

Wireless Config > 802.11g,

under Wireless Encryption choose TKIP or AES,

you can input your WPA-PSK (Previously Shared Key)


KittyTech

May 31, 2011 | Buffalo Technology WHR-G54S Wireless...

1 Answer

Can't load the Buffalo Wireless N WHR-G300N router IP address


fingers crossed i maybe able to help you solve the problem if you still have it do you have msn were we can chat to resolve the problem or via email it may be easier

when you connect it to your computer via RJ45 cable right click on the network card and click staus to see your default gateway and is this the same address as you are trying to connect too to change the configurations.


Jan 23, 2009 | Routers

1 Answer

Trying to connect buffalo router to comcast modem for wireless internet


You will need to use the MAC address of your PC. Do an IPConfig/all while connected with a ethernet cable. That's whatg you need to put in under Wan--> WAN MAC address

Jan 17, 2009 | Buffalo Technology AirStation G54...

1 Answer

Buffalo G45S router


make sure that there's a wireless card installed in the laptop. if it has, check that it's installed properly on device manager. if it's installed properly check if the wireless capability of the router is enabled. you can access the router's web user interface for you wireless settings. if you have done evrything but your laptop won't still connect, try to isolate the problem by connecting another laptop to your router wirelessly, if another will connect porperly to the router, it means that there's somethign wrong with your laptop or the other way around

hope this'll help you and just ask me if you have other concern

ciao!

Aug 25, 2008 | Buffalo Technology WHR-G54S Wireless...

1 Answer

WHR-G54S


problem is resolved many thanks i found my cd's and restarted the whole loading process from the beginning

Jul 30, 2008 | Buffalo Technology WHR-G54S Wireless...

1 Answer

CAN NOT FIND SOFTWARE TO INSTALL HARDWARE


here, read this - you should use an ethernet cable to install the router - it is alot easier but here is the manual that will tell you exactly what to do - http://www.buffalo-technology.com/support/getfile/?WBMR-G54+Manual.pdf

Sep 19, 2007 | Buffalo Technology Buffalo AirStation...

2 Answers

Buffalo wireless router


you may need to dissable your wired lan adapter as it will be looking to assign the same ip address and you need it to assign to your wireless adapter. Asuming your router is wireless enabled as some are not be default and make sure your router has DHCP enabled to automatically assign ip addresses to your pc,s

Sep 16, 2007 | Buffalo Technology Buffalo AirStation...

Not finding what you are looking for?
Uniden WNR2304P 802.11b Wireless 4-Port Router with Wireless PCMCIA Network Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you an Uniden Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...