- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you purchased your router, if It came with software then your going to have to use that. It should be as simple as opening the software, finding the setting and changing it. If not, your going to have to be an administrator on the network and go to network settings.
In your Web browser, navigate to the router login page. By default, one or all of the following URLs should work: • http://www.routerlogin.net or http://www.routerlogin.com • http://192.168.1.1 or http://192.168.0.1 Note: You can sometimes find the login URL on a sticker on the bottom or back of the router.
Enter the username (admin) and the password. • The default password is password, or for older routers, 1234. • If you have already changed the default password, use the password you assigned the router. Passwords are case sensitive. • If you have already changed the password and do not remember it, you have to reset the router to factory defaults in order to use the default password. Resetting a router to factory defaults erases all changes you have made to the router's configuration files.
This information is extracted from www.netgear.com, for learning purpose only.
Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.
From the center screen, select your encryption type from under the Security Options heading.
If the wireless network passphrase is visible, review it and use it to log devices onto your network.
If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.
In a web browser, enter the router's IP address - either http://192.168.0.1 or http://192.168.1.1 by default.
When prompted for a Username and Password, enter the default username and password (admin; password)
unless you have already changed it. NETGEAR recommends changing the
default password to increase the security of your network.
Select Wireless Settings from the Setup menu in the left-hand navigation bar.
Hello, If you haven't changed anything from default, in address window type 192.168.1.1 this should be default address for router. It will then prompt for a ID and Password..enter admin for ID and if needed the same for password. This will let you into the router settings and where you can change SSID and Enable Firewall, WEP or WPA..Hope this helps, thanks