Question about RCA 27V530T 27" TV

1 Answer

RCA 27V530T I was watching tv and all of a sudden the picture went out. I still have sound. I tried all of the video inputs on the back of TV and going through all of the channels. Someone please help!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers
Re: RCA 27V530T

Sounds like you have a bad solder connection on the coil connected to the base of the horizontal o/p transistor. the flyback has the big red wire. ( do not touch, just for reference), to the left and forward a little on a heat sink will be the transistor. on the other side of the heatsink,( a little more forward), you will fond a small coil on the board ir is red & you can see the windings. locate this part on the bottom of the board & resolder this part. good luck.

Posted on Dec 24, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My tv has no sound

If you are feeding an rf signal to your tv, the problem lies within the tv's audio circuits after demodulation of the signal. Try feeding a composite video and audio signal into set and see what happens. If set works then problem is definitely in the front end of the tv. If still nada you have a repair on your hands.

Nov 23, 2013 | RCA 27V530T 27" TV

1 Answer

Tv turns on we can watch it for a few minutes then it clicks and the picture is gone. the tv is still on just now picture.

try to re-heat the mother board or in the crt board..then voltage checking..i think flyback is deffective

Sep 06, 2010 | RCA 27V530T 27" TV

1 Answer

My Tv Has No Picture But Has Sound

may be bad solder but it is in the video circuit
call tv shop

May 01, 2009 | RCA 27V530T 27" TV

1 Answer

RCA tv with no picture

problem fixed, check capacitor CV018 100uf between the pin 54 and 55 in the video chip, the capacitor was leaking, also check the board for cracks.

hope it works for you.

Oct 11, 2008 | RCA 27V530T 27" TV

1 Answer

Broken TV

the solution to fix you tv is replace broken video cable tv obviosly cant find an input.

Aug 25, 2008 | RCA F32650 32" TV

2 Answers

"Unusable Signal"

Ok, I stopped short of going to Best Buy to get a new TV b/c my DAD suggested I pull the DVD player on another tv.

Dang it, he was right!. Same "audio no video" problem.

After playing with multiple buttons shooting blindly I found the [ I/P ] button restored the picture immediately!

This stands for Interaced or Progressive scanning:

from wikipedia

"Progressive or noninterlaced scanning is a method for displaying, storing or transmitting moving images in which all the lines of each frame are drawn in sequence. This is in contrast to the interlacing used in traditional television systems where only the odd lines, then the even lines of each frame (each image now called a field) are drawn alternatively."

So, my Dad says that "TV s are based on the interlacing" technology. I must have picked progressive scan while I was in the dark fast forwarding last week.

Mar 27, 2008 | RCA 27V530T 27" TV

1 Answer

Unusable Signal

I have exactly the same problem, with my RCA F27645. I can find no answers on the internet, so far.

I have 3 ideas.

1) The digital signal receiver must not be receiving the DVD signal properly.

2) Coaxial cable receiver (the little pin plug) problem

3) Digital TV (broadcasts) causing havoc on older TVs.

Mar 27, 2008 | RCA 27V530T 27" TV

1 Answer

RCA 32 in TV no picture no sound just a beeping noise TV power is on

Hello cote,

This indicates a problem in the power supply either the low voltage switching supply or the High voltage power supply. The sounds you hear is the shutdown circuit activating, I would not suggest that you try to repair this problem because of the dangers involved. I would suggest that you take it to a qualified TV repair shop. This problem should not cost you much, however it is the best choice for the problem you described.

I hope this helps,
Thank you,

Mar 14, 2008 | RCA 32V524T TV

1 Answer


This is usually caused by the tuner which loses the chrominance part of the NTSC signal. Your did not say how you have it connected but it you try using a composite video input (yellow jack) and get the color OK than it must be the tuner which is not cheap but is worth having replaced.
Hope Ya Fix it!

Dec 28, 2007 | RCA 27V530T 27" TV

1 Answer

RCA F32650

I let it go and she corrected by herself. What do you think?

Aug 14, 2006 | RCA F32650 32" TV

Not finding what you are looking for?
RCA 27V530T 27" TV Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66412 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides