Question about Fujitsu Computers & Internet

1 Answer

How to set a Fugitsu HD as slave.

I have a Fugitsu model: MPA3035AT cl ID: YTIN
3.2 GB HD
that I want to install into a IBM Lenovo desktop as a second drive.
And I need to know which pins to jump to set it as "slave".

Thank you,
Bo

Posted by on

  • robert_breed Nov 24, 2008

    The Google address that you told me to use worked the first try and I got the information I needed.



    Thank you. You get my vote.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Http://www.alyon.org/InfosTechniques/informatique/drives/fujitsu/setting/overseas/empa30xxat/epb10.html

Try to use google first before asking (not try to be offensive in anyways, and you are in the right place)
Anyways shouldn't this not be the right side (found in 8 sec checked it 2 sec) try a search like:
Fugitsu MPA3035AT jumper setting(s).

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do i install a used hard drive into an eMachines T2341? The hard drive still has information on it. do i set it as master, slave, or cable select? hard drive is an IBM 10.1 gb


There are two possible solutions depending on how your desktop is setup.
#1 install the 2nd hard drive and put jumper to CABLE SELECT. When you start the computer it should now appear in the bios as a SLAVE or 2nd hard drive. If not go to #2 below
#2 Turn system off again and change jumper on 2nd hard drive to SLAVE.
Now when your computer restarts it will appear in your bios correctly as the 2nd drive/SLAVE.
Do not make it "MASTER" or you will be trying to boot up to this drive and it may not work as you planned.

FYI: "Cable Select" means the hard drive determines which one is Master and which one is Slave by where it is on the data cable.

Good Luck

Dec 30, 2009 | Computers & Internet

1 Answer

What are the jumper settings for a quantum Fireball 20 gb HD to set it as slave


looking at the bottom of the drive where the circiut board is ,then turn the connectors towards you, you will see the power connector , then right next to it is the pin setting block with 5 sets of 2 pins second set from the right edge is slave,put your pin tie on that set and your fine

Jul 10, 2009 | Quantum Fireball Lct20 (QML20000LD-A) 20...

1 Answer

Setting Maxtor HD as Slave.


Howdy,

First "easy" one I've had in hours....

Just pull the J50 pin out of the jumper block and PRESTO it'll be a slave the OFF position literally reffers to having the J50 pin off of the hard drive. Just a note though, I highly recommend using a peice of scotch tape to affix the pin to a nearby surface cause there a real pain to find if and when you need em again.


Chris,
Armor-IT

Apr 23, 2009 | Maxtor DiamondMax 60 (33073U4) 30.7 GB...

1 Answer

Iomega Minimax HD, no power but lead light is on. Working fine, then I turned it on today & nothing, no fan, no light but the power lead green light comes on. How do I know if its the HD or the power lead...


In your situation I would :

open the minimax enclosure, and take the hd out, (just open the enclosure, not the hd itself), and then open your desktop and connect this hd as slave (I am guessing you have a desktop with IDE hd and that the minimax has an IDE hard drive in it.... or both your desktop and the minimax has SATA hard drives) and then when you turn on your computer you should be able to see your second hd as a partition and be able to see the info in there, yet if windows does not recognize it, that means your hd is useless., yet remember you have to change the pin on your external hd to be slave or auto detect, if you let it as master your computer won't boot, bout do not worry, after you unpluges the hd from your desktop everything will be normal

p.d.
shutdown and unpluged the power cord from your desktop when adding/removing the hd.

Apr 18, 2009 | Iomega MiniMax Desktop - Hard drive - 500...

2 Answers

How to detect the hardrive?


Hi,

setup the first drive as slave ( sometimes No Jumper ) then the furthest away drive as Master.
If this fails, and you have 2 IDE Slots on the motherboard. ( Primary/Secondary ) Put 1 drive on primary as Slave. And DVD Rom As Master ( same Cable ) Then put second drive On Secondary IDE Slot. ( Set As Master Or Slave )
If none of these solutions Work For you, check to see if Both Channels are activated in the Bios.

Thankyou For Using Fixya.

Mike @ compurepair.

Jan 28, 2009 | Maxtor Hard Drive

1 Answer

Hard Drive


Hi I use Maxtor HD's and IBM Deskstars also, one of my pc's has 4 500 gb SATA drives [not in raid mode] and have had some problems also.
If you are using 2 drives then one should be set as master and one as slave. Same thing goes for cd/dvd roms, master and slave, and use 80 wire ribon cables. If you are using just one drive and the settings in your bios, and master or slave and what drive boots up the machine.
if using only 1 drive set it to master [in SATA it does not matter you can leave them all as masters, and only if the cd.dvd's are SATA also, if not they have to be set up as master & slave, set the bios to boot from cd drive 1st 2nd is your HD and last is if you still use them a floppy. On boot with the OS CD in the drive boot the pc and it will start the instalation of windows, delete any partitions, format the drive [NTFS] NOT FAT OR FAT32, and you should be able to do a fresh instal. As with 2nd hand drives as they were used on another pc they have hidden files left on the drive [unless the person that gave it to you has prepared the drive to do a proper instal if not windows gives you the option to delete, create and format the drive, to be ready to continue to instal windows.
HTH
Zues

Dec 21, 2008 | Maxtor DiamondMax Plus 9 120 GB Hard Drive

1 Answer

Samsung 80 gb Hard Disk Un allocated


All ways best to used new cables (sata/Ide) I like to set jumpers on the HD's never cable select. Also try installing one harddrive at a time. Second make sure in bios is set to boot from main HD.

May 12, 2008 | Samsung SpinPoint P80 SP0802N 80 GB Hard...

1 Answer

Ibm ddrs-34560 ? mettre en slave


This is a SCSI drive. You need to set an ID using jumpers as shown here
398d489.jpg

Feb 23, 2008 | IBM UltraStar 9ES 4.5 GB Hard Drive

1 Answer

DDRS-34560 HD


Here is all the info you need.
http://support2.jp.dell.com/docs/storage/ibm4scsi/Jumpers.htm

Nov 04, 2007 | IBM UltraStar 9ES 4.5 GB Hard Drive

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Computers & Internet Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Florin

Level 3 Expert

733 Answers

Are you a Fujitsu Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...