Question about 2wire (1000-000005-002) 802.11g/b Wireless Adapter

1 Answer

HP Laptop does not connect to internet unless directly

If I connect the ethernet from the DSL (2wire) directly to my laptop, it works. When I use the wireless network to the linksys router (wireless-g) I cannot connect to the internet. I use the linksys to connect my home network and I have a printer off my desktop. My desktop now works fine (it has a wireless linksys card to connect to the router) and I can print and see the other computers before from my laptop, but now I am not sure.

Posted by on

  • dstoller Nov 23, 2008

    Actually it was the double router that caused the problem. My usually home network used a Linksys Router, but adding the 2wire router/DSL made the Linksys unnecessary. I was still to use both, but by removing the Linksys, I was able to connect both computers to the internet and to still connect them together with the 2wire router.

  • teaboy1 Jan 20, 2009

    when desk top on laptop wont connect to iternet some times it will sometimes wont could it be the fire wall on laptop

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

Hello dstoller,
You description is very confusing to sort exactly what is or isn't happening.Let me try to sort out what you have:

You have a Laptop

You have a Desktop

Desktop has a printer attached

You have a DSL modem with a wireless router

Laptop via ethernet: Good

Laptop via wireless: Not Good?

Desktop via wireless: Good

Not sure exactly what you are needing help with...


- Vincent

Still not sure what

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im using a 2Wire Gateway DSL connected via ethernet to a Mac G4, I also have a laptop running windows vista and it has strong wi-fi connection, sending packets at optimal levels and speed. BUT Problem


Vista has a well known flaw of not allowing you to easily change access rights after selecting "public network" in the initial network connection screens. The easiest fix is to change the name of your wifi access point, reconnect, and be absolutely certain to select "home network" when the prompt comes up.

The best solution however is to ditch that crummy excuse for an operating system and upgrade to Windows 7 or 8.

Oct 05, 2014 | Computers & Internet

2 Answers

I have an at&t 2wire 2701hg-b but i dont have at&t internet i have charter and i am not able to figure out how to get my internet to work with this router please help


att 2 wire is a Adsl Modem (Requires a telephone line jack to get the signals) but charter communication is a cable internet service (not DSL) , Requires a TV cable service for internet .
These two jacks differs and there working differs ..
Means : Att works with the username and password type of authentication but charter requires the MAC address of modem for authentication .
Therefore for a cable internet 2wire 2701hg-b modem cant be used . But yes in case charters has username and password authentication and works with the telephone jack in house then its possible to use the same modem.

Aug 19, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

What steps do I take to configure my 2wire 2701 hg-b to connect directly by ethernet cable to my Directv HD DVR and pick up the dsl signal being transmitted by my primary westell router? Both are wireless...


Connect the cable at both ends and do a red button (inside card door) reset of the DVR. To test the connection, do thus: Menu -> .....setup -> system setup -> network setup -> test connection. If it shows not connected then "reset defaults" and run "connect now"
As a basic security feature the ATT DSL 2Wire 2701HG-B router/gateway requires you to enter its pre-assigned WEP key to connect beyond the unit itself and then to the internet. Since the Direct TV DVR HD24D only does a basic connection without having a place to enter the 2701HG-B WEP key it never actually reaches the internet.
The 2Wire 2701HG-B has the ability for one attached unit to "pass through" its firewall and internal security settings using a so called "DMZplus" mode. I set the HR24D DVR to such a mode within the 2Wire unit and the DVR connected with the internet flawlessly.

Dec 30, 2010 | 2wire (2701HG-B) Wireless Router

1 Answer

Laptop not connectiong to wireless network


Connect the Laptop to the router with ethernet cable
Verify the wireless LAN
  • Open a browser and type http://gateway.2wire.net; the Home page opens.
  • Click the Home Network tab.
  • Verify the wireless status located on the right panel (Status at a Glance) is Disabled.
  • When the status is disabled, then enable the wireless LAN .

May 27, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Internet will stop working when laptop goes on standby


www.2wire.com I would be calling these folk in a heartbeat this should not happen and the fact is this is a malfuction with the modem myself. I have 2 of these modems without this issue.

May 22, 2009 | 2wire (1000-000057-000) Modem

1 Answer

Have SBCglobal with 2wire but want N wireless capability


Follow the dots -

2 wire DSL wire to back of DSL modem.

Ethernet cable out of DSL modem, to current router (if you have one).

Ethernet cable out of current router (if you have one) to new Wireless N router.

If you currently have a wireless G router, keep it, or, use the new Wireless G/N router alone. You will need to set up all security settings again if you remove your current router, and if the new router is N only, you will need to make sure all your wireless connecting computers have wireless N cards in them.

Jan 24, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

2WIRE wireless router/DSL from AT&T


unless this is a wireless enabled or lan RJ45 connectable printer you cannot, the pc that the printer is connected to must be on at the time of the printing.

Wireless printers have their own arial and allocated ip address, Lan RJ45 connective printers can be connected to the router.

Sep 15, 2008 | 2wire (1000-000005-002) 802.11g/b Wireless...

2 Answers

Connecting 2wire router with desktop pc and laptop


hi! try to check the settings on your 2wire modem, you can do this by going to gateway.2wire.net, run the system setup wizard, when you get to the ppp authentication page, check the username & password on it, it should be the one that you setup for your ISP account. as for the wireless on the desktop, it depends on the brand of the wireless adapter, be sure you have installed the drivers for this adapter. you may need to go to the client utility manager or the wireless adapter shortcut/icon on your computer screen then configure it to "see" the 2wire network. make sure wireless encryption is turned on in the 2wire modem's MDC, you can do this by going to homeportal/management, or go to gateway.2wire.net/mdc.

Apr 11, 2008 | 2wire (1000-400108-001) Router

6 Answers

2wire Wireless router not working w/Comcast cable modem


Its almost impossible to connect a 2wire DSL router with a Cable modem. They dont go hand in hand.
Although you can connect the outgoing ethernet wire from the modem in the last ethernet plug on the back of the router and then have the ethernet connections coming from the router. But not wireless. and if you find a way, contact me at jneal2k9@hotmail.com

Feb 03, 2008 | 2wire (1000-400108-001) Router

Not finding what you are looking for?
2wire (1000-000005-002) 802.11g/b Wireless Adapter Logo

786 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

noti13

Level 1 Expert

15 Answers

William Dehn
William Dehn

Level 3 Expert

318 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...