Question about PC Desktops

1 Answer

Have downloaded new lexmark x4270 driver for Vista. Still can't print.

Posted by on

  • vcl2 Nov 24, 2008

    yep, done this 3 times. I am getting a 'wizard' problem. the software looks to be installed, but when you try and print i can't.. help!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • PC Desktops Master
  • 4,806 Answers

Un-install the old drivers and software, then reboot the computer with the USB cable to the printer pulled out and reinstall the lexmark software, it will tell you if you need to put the cable in!

here is the authentic lexmark sofware just in case:

http://downloads.lexmark.com/perl/downloads/downloads.cgi#


regards

Posted on Nov 22, 2008

  • Lee Hodgson
    Lee Hodgson Nov 24, 2008

    make sure you clean the registry after un-install!!
    link here:
    http://www.filehippo.com/download_cclean...

    try this then post back if problems still persist

    regards


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2 laptops. 1) OS=XP.Z53 ok 2) OS=Vista. How to get Z53 printing?


I am afraid that Lexmark has no Vista driver for the Z53.

Here is the Vista Compatability list from Lexmark:

Lexmark/Vista Compatability

Dec 14, 2008 | Lexmark PC Desktops

2 Answers

New computor willnot accept lexmark 7100 series


What is the error message that you get? What operating system are you using?

Sep 29, 2008 | PC Desktops

2 Answers

Lexmark x4270 won't print with vista


Have you tried reinstalling the software that came with the printer as this can solve your problem

Apr 06, 2008 | PC Desktops

1 Answer

Have new computer. Used CD for printer to install. Would only print ist page. If additional sheets required, would not print. Printer: Lexmark 2400. Computer: HP with Windows Vista. What is needed to get...


goto lexmark.com
drivers & downloads
driver finder
enter 'x2450' for model
and download the xp driver and install

I'd appreciate the 'fixya' feedback too

Dec 03, 2008 | Lexmark PC Desktops

1 Answer

My Lexmark x1270 printer stopped printing. I don't have the installation cd, either. What can I do to correct the problem?


Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,findthefile,doubleclickonthefile, then if you get introubles,follow theinstructionsbelowtoreset andreinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website and run the file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:some printer does not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

Oct 22, 2008 | PC Desktops

1 Answer

Bought a new computer had windows Vista on it my printer lexmark x4270 worked in my old windows XP,but it don't work with Vista. I tried to get a driver for it but no luck. where can I get a driver . I...


This usually happen with an old printer and new computer with new OS.
You can try downloading your new driver for Vista at Lexmark website here:

http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_652569478_0_en,00.html

If doesn't work, ask to customer service for assistance

But at this point:

1) is better to get a new printer compatible with Vista

or

2) Downgrade your OS to one compatible with your printer.

***********************************
This will fix your problem.
Don't forget to rate my help! :-)
Thank you for using FIXYA!
Pablo

Oct 15, 2008 | PC Desktops

1 Answer

Printer


My operative system is using a Vista, and my printer is a Lexmark x4270.

Sep 29, 2008 | E-Machines eMachines Desktop PC

2 Answers

Drivers for the sanyo lmu-tk18ag3tc touch screen


Go to sanyo.com under support look for downloads. search for drivers.if you cant find it call them they have improved their responses to consumer. Good Luck

Feb 29, 2008 | PC Desktops

2 Answers

Installing Lexmark 6100 series all-in-one to new hp computer


There are some compatiblity problems between Vista and your printer. Check this web page to download a driver that may provide limited printing capability for your printer...you'll need to use Windows Scanners and Cameras or Photo Gallery for scanning.

Jan 18, 2008 | HP Pavilion Media Center a1330n - AMD...

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...