Question about Digital Cameras
You will have to send the camera back to Canon for service, or buy a new one. The lens and maybe some other internal parts will have to be changed.
Posted on Nov 22, 2008
Tips for a great answer:
Jun 10, 2013 | Canon PowerShot A650 IS Digital Camera
The non-functioning of the camera can be a fault in the shutter, zoom or auto focus sections and may be due to the jamming or break in the Main control system or the drive. A simple was is to reset and we can try by removing the battery and card for some time. Now replace only the battery and while switching power ON, tap the lens hood on the palm of your hands so as to disengage any dirt or mechanism being struck.While powering pull the lens out as a jamming or misalignment can be reset.
Tips to open and check for common faults:
Use some air to blow between the lens to dislodge any sand particles struck inside. Unless you are familiar with handling of small devices must the camera be opened. If so check the voltage on the motor drive, check the auto focus and Zoom drives, it must be free with manual movement. If jammed the motor can be removed and released. If none of these works then you can think of taking consensus with the service centre.
Get estimate before you decide. It will be good to have it checked at the authorised service as you do not have to run around for spares.
Thank You for using Fixya
Sep 20, 2011 | Konica Revio KD-400Z Digital Camera
Jul 05, 2010 | Kodak EasyShare C613 Digital Camera
Jun 13, 2010 | Nikon Coolpix L11 Digital Camera
Oct 18, 2009 | Canon PowerShot A650 IS Digital Camera
May 29, 2009 | Canon PowerShot A650 IS Digital Camera
Mar 27, 2009 | Canon PowerShot A650 IS Digital Camera
Jan 08, 2009 | Nikon Coolpix S210 Digital Camera
Jun 22, 2006 | Samsung Digimax 420 Digital Camera
474 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: