Question about Televison & Video

1 Answer

Lamp and Power lights blinking fast and no picture...

I called the local JVC repair place and they told me that since my TV was purchased in 2004 it was likely the bulb. So I replaced the bulb and it went fine, but after i plugged it in it was still blinking fast and without a picture. Help!Its a JVC D-ILA HD-52Z575

Posted by on

  • mach500 Mar 18, 2009

    I have the same tv and purchased in the same year as the original post. One difference is about 6 months ago I replaced the bulb. It sounds like from the original post that the problem is not with the bulb, but could it possibly be the fan or power supply?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi mach500..We just had the same problem. Did you find out if it could be the fan?
Thanks

Posted on Aug 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power led and lamp led blink simultaneously on my jvc hd65s998 rear projection tv


You might need to replace your lamp driver, or ballast as some call it. This is what strikes the lamp to make it light.

Mar 20, 2013 | JVC Televison & Video

1 Answer

Picture has progressively darkened over the past few months. Replaced the lamp which did not help. Next place suggested replacing te lamp ballast which did not help either. Now I'm being told it s


You might want to talk to JVC as this model had all kinds of issues--missing any color, picture inverted or backwards just to mention a few.

The solution was to connect it to a computer and use a jig from JVC and download two up grades on sd cards and install them manually.

I mention this as the Light engine in the set communicates with the main chassis and you in fact may have a issue with that.

At least make a call to JVC---saw about 40 sets with this model where this cures all sorts of communication issues--the engine if "set" wrong could easily cause this problem.

Dec 19, 2012 | JVC HD-52G786 52" Rear Projection HDTV

1 Answer

My AV-48WP74 TV has voice but no picture. I told it's the lamp...how do I locate it????


Double check the model number as this model does not use a lamp; It has three picture tubes which almost never fail.

Give me as much information as you can (does power light blink etc)

Before you rate this information let me know what you find.

SD TECH

Aug 11, 2011 | JVC AV-48WP30 48" Rear Projection...

1 Answer

The lamp light and power light (the red and blue lights) are blinking together but no picture. What can I do


The tv projection lamp has been inside tv about 2 years alredy?Yes.Time to replaced the tv projection lamp.The tv projection lamp life are over.

Jun 15, 2011 | JVC HD-61Z456 Television

1 Answer

The TV toll me to some light was ready to expire. What do have to buy??my screen is off.


Your tv needs lamp replacement that was said, required lamp for tour JVC HD-56G787is available with discount-merchant.com for $135
Replace lamp in tv to get its picture back, call local tv repairman to replace lamp if you feel uncomfortable doing so.
Thanks.

Nov 16, 2010 | JVC HD-56G787 Television

1 Answer

I have RCA HD50LPW167 DLP TV with NO Sound and NO Audio. The LED blinks when I turn the TV on but that's all it does. Took it to the local RCA authorized repair shop and they told me that the digiital...


Still sounds like a lamp:

TV won’t turn on
• Press the TV button or ON/OFF button while remote is in TV mode and there’s a source of power to the outlet or outlet strip.
• Make sure the TV is plugged in.
• You might have tried to turn on the TV during the lamp cool-down. Wait a few moments and the picture will appear.
• Has the power light on the front of the TV been blinking for one minute? If so, the lamp may be dead. Refer to the Power indicator
is blinking or fl ashing
section below for more information.
• When you fi rst plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 seconds
and then go off during the initialization of the TV. This happens only when power is reapplied to the TV. The TV can only be turned
on after the Power indicator goes off.
• Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else, such as a lamp.
• Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the
remote control solutions on page 84.
Remote Setup might be set to the wrong option. Press MENU/OK on the front panel. Select Connections, then Special Features, then
Remote Setup. Choose TV (default).
Power indicator is blinking or fl ashing
If the light blinks 5 times, pauses, and blinks again 5 times, the lamp is trying to turn on. If the TV doesn’t turn on after 5 minutes and
then the light blinks steadily for one minute, one of the following options is possible:
• Lamp door may be open.Face the back of the TV. Locate the door at the bottom of the TV and close it. Turn off the TV and turn
back on. The lamp should turn on.

You can easily replace the lamp yourself by following the lamp replacement instructions. If your TV is still covered by
the warranty, call 1-866-723-6486 to receive troubleshooting assistance and a lamp replacement.
• If your TV’s warranty has expired, call 1-800-338-0376 to purchase a lamp replacement.

To order the correct lamp, you’ll need to know your TV’s model number, serial number, and lamp type—this
information is listed on the Service Model Number sticker (example of the sticker is shown above). Face the back of
the TV. The sticker is located on the right side of the TV.

Hope this helps :)

Mar 07, 2009 | RCA HDLP50W151 50" Rear Projection HDTV

1 Answer

JVC HD-527575 problem


We just had the same problem. The Projector lamp is burned out. You can get the lamp at Electrified.com. Their phone # is 800-678-8585

Oct 10, 2008 | JVC HD-52G786 52" Rear Projection HDTV

2 Answers

Jvc tv


when both the blue light and red light are blinking it means 1 of 3 things. 1. lamp replacement. This often works everytime for the repair. TIP!!! DO NOT USE ANY OTHER LAMPS OTHER THAN JVC AUTHENTIC LAMPS. ANY OTHERS AND YOU RISK DAMAGING YOUR TV FURTHER. 2. the fans are not working properly or need to be replaced. They need to be cleaned every so often and they will stop working from burn-out if not done so. This repair will cost you less than 100 dollars. 3. The ballasts are defective and need to be replaced. The ballasts themselves run about 150 dollars. I tell you I have fixed this TV more times than I care to count, not to mention the number of lamps I have gone through. The guy at the TV repair place now knows me by name when i come to buy lamps. :(

Aug 25, 2008 | JVC HD-52G886 52" Rear Projection HDTV

1 Answer

Blue light and lamp light flashing, no picture.


Look in the owners manual for the directions on how to remove the lamp. Your model the lamp goes in from the front on the left looking at the TV. There is a thumb screw in the back on the corner holding the left front speaker on. Under the panel there is another thumb screw holding the lamp door on. You will need a Phillips screw driver to remove the lamp. You will most likely find that the lamp is bad. You will either have to order a lamp directly from JVC, a service center or a parts distributor.

Apr 21, 2008 | JVC HD-52Z575 52" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

yadayada
yadayada

Level 3 Expert

63580 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...