Question about Samsung DLP HL-P5663W 56" TV

Open Question

Green flashing light and attempted restarting

Thank you for you help. My Samsung HLS6187W lost its picture and now will not start. When it is powered on, the green light blinks and it tries to start. No picture. Then shuts down and immediately tries to start again. This continues until eventually all three lights are blinking and restarts have stopped. I am under extended warranty, I replaced the lamp, but this did not help the problem. Thanks again.

Posted by on

  • bigrob37416 Nov 22, 2008

    I am having the same problem. It tries to come on, but the lamp goes out within five seconds or so. I have no picture at all. I have replaced the lamp and the ballast. I am lost so I need help too.

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

IB4G2008
  • 3587 Answers

SOURCE: Samsung HLM507 FLICKERING PROBLEM

how extended is that warranty, and what does it cover? Sounds to me like a classic video controller board about to fail.

Posted on Mar 24, 2008

  • 1 Answer

SOURCE: dlp tv will not "fire up"

It doesn't have a flyback or an HOT genius. It's a DLP.

Posted on May 24, 2008

fillmore85
  • 62 Answers

SOURCE: I own a Samsung HL-R5067W 50

Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.

Posted on Oct 20, 2009

  • 8457 Answers

SOURCE: HLN4365w has three blinking green

The board call Ballast board also dead.Hear clickings alot power turn on?This Ballast board help to ignite the projection lamp.

Posted on Aug 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a Samsung dnie model code spp4251x/data tv when powering up the front light comes on but no picture or anything anyone got some good info??


tv seems to turn on but no picture? - Forums - CNET

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - ... Samsung Dlp TV (HLR-5067W) it seems like the TV turns on butthere is no picture. ... the lamp is, light is visible from where the lamp is located but no picture. DLP Twon't turn on, blinking green lamp light then shuts dow ...
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
The timer, lamp, and standby/temp. light are flashing?!
Jun 11, 2015
Samsung TV Keeps Shutting Down
Jun 11, 2015
More results from www.cnet.com

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA
May 8, 2014 - Uploaded by ShopJimmy.com
TV Repair Help for a TV With a Black No Image on the Screen ...I Have A Sanyo TV I Can Hear But Black Screen Im 14 And Dont Know What To Do ! .... power button the power light goes from red to green, the screen flashes on then goes black ....Troubleshooting LCD Backlight Failure Samsung LNT-4066 ...

Samsung plasma tv repair blinking light no picture ...




Jan 09, 2016 | Samsung Televison & Video

1 Answer

Panasonic LiFi model number PT-50LCZ70. Have red lamp light flashing on front 2 times. Have tried to turn it on and get no picture and no sound at all. I checked and the fan is running. What now?


After the red 2 flashing starts, press the power button on the front of the TV and hold pressed down for ten seconds.
You will hear a faint click comming from the back of set.
After 10 sec release the button and wait 10 more seconds then press the start button and release right away.
The green light flashes and the bulb attempts to start.
I found my picture will turn on on the third attempt of the bulb restarting.

When you do this and the room is dark you can see the bulb attempt to restart, My bulb has restarted on the third restart every time.

(note: The three start attempt happen after I do the button pressing
1 time and I do not need further button pressing restarts.

I think panasonic needs to let us know what the problem is.

I called Panasonic and they told me to plug it into a wall plug by itself.

I have it plugged into a multi plug adaptor now and have not tried this yet.

Nov 06, 2009 | Panasonic PT-50LCZ70 50" HDTV

1 Answer

Flashing green light


Did you try this yet

SYSTEM RESET
If the TV will not respond to either the remote control
or the front panel controls and/or will not power Off,
press the SYSTEM RESET button with a pointed item
like the end point of a paperclip. The TV will turn Off
and the TIMER light will flash quickly for about one
minute. When the TIMER light stops flashing, you may
turn on the TV again. Changes you made the last time
the TV was On before you used the SYSTEM RESET
button may be lost, however, the changes you made
previously are not lost.
POWER/TIMER Indicator
The green light is a multi-function indicator. This light
will flash rapidly for about one minute each time the TV
is plugged into the wall electrical outlet, when power
is restored after a power failure, or using the SYSTEM
RESET button. Do not attempt to turn on the TV again
during this period. Wait for the flashing to stop and
the light to turn off, before attempting to turn the TV
on. While the TV is powered on, the light illuminates
steadily. If the TV has been programmed to turn on
automatically using the Timer feature,

Sep 21, 2009 | Mitsubishi WS-65515 65" TV

1 Answer

61" RCA DLP won't turn on after power blip


Hi, thank you for visit fix ya.
Do you havve problems with power supply capacitors.
Replace this:
2200uf 25V, 220uf 25V ( bowed or vented). Located beside power transformer.
Thank you

Jul 26, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Lost manuel in moving..


heres a link to the user manual for your model DLP. They provide a download link within minutes of ordering.
http://servicemanuals.vstore.ca/product_info.php/pName/samsung-hls-5087w-hls6187w-user-manual

Jan 24, 2009 | Samsung HL-S5087W DLP TV

1 Answer

Samsung lcd tv ltm1755b won't turn on (power light stays red)


Problem: Samsung LTM1755B with only a blinking yellow LED when you try to turn it on.

Solution: I just had one of these come in. I opened it up, and found the U501 capacitor a little suspicious looking, in that it had a deformed top. It was a 470uF 16V electrolytic 105degC 10mm x 12mm. I replaced it with a very good quality 1000uF 16V electrolytic 105degC 10mm x 16mm Nichicon UHN1C102MPD. After that repair, when I tried to turn it on, the LED was yellow for a second, then green, then I got a picture, and it appeared to work great. I then asked the owner a week later how it was working, and they said it was working just like new!

Jul 31, 2008 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

1 Answer

Blue screen with Green Star-burst image in center?


Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.

For example, 3 flashes, then 7 flashes = 37.


Here are the error codes, and the corresponding problem:

12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected

Jan 19, 2008 | Mitsubishi WD-52725 52". Rear Projection...

Not finding what you are looking for?
Samsung DLP HL-P5663W 56" TV Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...