Question about Sony KV-32S26 32" TV

1 Answer

Slanted picture!! Hi, The picture on my television set is slanting down to the left (as if the right side of the TV is raised higher than the left, but its not of course). The TV is perfectly level so I know it is an internal problem. Can anyone help with this?? Please let me know. Thanx.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This problem might be caused by an external magnetic field. Most modern Sony tv sets have a picture rotation control. Go to the setup menu and select Picture Rotation. Your user guide will explain.

Posted on Dec 23, 2006

  • Ian Smith Jan 04, 2007

    Check to see if the scan coils on the tube neck have not moved.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture is slanted left to right.


Check and replace the main digital processor board. Synchronization problem, along with phase.

Aug 19, 2012 | Samsung HL-T5676S Television

1 Answer

The HD video input channel has a slanted, dual picture.


check for the settings or the inputs doesnt match with the unit.

Jul 24, 2009 | Sony KV-32FV15 32" TV

2 Answers

Convergence lines are SLANTED. Red line is above


Your TV most likely a convergence failure. ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem


  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
Here are some photos of convergence problems.

3dc9420.jpg
645fba6.jpg
0dcec37.jpg
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

0667c5f.pngSOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.

Apr 26, 2009 | Hitachi 53FDX01B 53" Rear Projection...

1 Answer

Convergence lines are SLANTED. Red line is above horizontal center on left side on screen and below horizontal center on the right side of screen. Also left of Vertical center at the top of the screen and...


did you check the six 3.5 pico fuses that are next to the ICs? They will often be open ( blown) when the ICs fail. Also check the two 5 amp IC protectors on the G board as those protect the two ICs so its possible they have blown also a 5 amp pico can be substituted for the two IC protectors.

Apr 26, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Pretty sure this is the right model


Go to this page:

http://www.hdtvoice.com/voice/archive/index.php/t-16909.html

About halfway down are some good settings for picture, especially in theater mode on hd. As for the slant go here:

http://www.fixyourowntv.com/projection.php

Awesome site with good information. Go here for information on problems and symptoms.

http://www.fixyourowntv.com/symptoms.php

Good luck.

Jan 17, 2008 | JVC AV-48P575 48" Rear Projection...

1 Answer

I'm having a problem with the picture tube on my 51 inch sony rear projection TV, 3 years old. All of a sudden the display that reads "Video 1" or "Video 2" is slanted and so is the...


It is very common to have the convergance circuit on these sets go out and cause display distortions. Are the colors separated or is just the picture slanted?

Dec 31, 2007 | Televison & Video

1 Answer

Slightly slanted screen/picture


your main filter capacitor in power supply has gone defective.

just replace it .

every thing will be normal.

good luck.

 

Oct 17, 2007 | Toshiba 36AF43 36" TV

1 Answer

Picture slants right to left


Hope you have fixed this problem by now, if that tv is unserviced, I mean if nobody has ever opened it, it could be a problem with the positioning of your tv, just tilt the tv in different positions and find out the position in which it will show the right fit. If it is serviced, especially yoke is changed, this is rare, it could be because the position of yoke is not aligned properly.

Dec 16, 2006 | Philips 27PT5445 27" TV

1 Answer

Slanted picture


Your deflection yoke (a coil around the neck of the picture tube) must have gotten turned. Your can turn the picture upside down by rotating this coil. If your set is in warranty, you should return it. When this "yoke" is adjusted the color is affected too. If you try this yourself you'd void the warranty and mess up your color. Stargazer

Nov 05, 2006 | Philips Magnavox 20MT133S 20" TV

Not finding what you are looking for?
Sony KV-32S26 32" TV Logo

Related Topics:

525 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...