Question about Tatung V30DMTT 29.6 in. LCD Television

1 Answer

No picture, no status light

Hello, I went to turn on my Tatung 30" LCD today and found that it wouldn't display anything on the screen. The little status light on the front that is orange when it's turned off or in stand-by and green when it's in-use is gone. I unplugged it and plugged it into some different outlets. Each time it made a slight poping sound when I plugged it into the wall, but it still won't turn on and the status light still won't come back. Anyone have any idea what's wrong or what to do?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This isn't a permanent solution, but it has worked for me. The first time I found out about this solution was when the status light went out on my Tatung. I just left it unplugged and didn't plugged it back in for about a month and a half just to see what it would do. When the status light came back on, I knew if it ever did it again, I could try the same thing. Well, a week ago last Sunday, the status light went out again, so I just kept track of when it went out and when I plugged the power cord back in to see if the status light would come back on. Today when I plugged the power cord in, the status light came back on. That was 9 days. I don't know if it could be less than that because the last time I plugged it back in to see if the status light would come on was around last Friday. So it might have worked sooner. Anyway, this seems to work for me. I don't know what is causing it to lose power in the first place, but at least I know what to do.

Posted on Apr 22, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont Display Anything , Black Screen !


The screens brightness might be set to the lowest number as a joke. Try to change that.

Dec 09, 2011 | Texas Instruments TI-84 Plus Silver...

1 Answer

My Pentax Optio A20 was working fine and then the screen went blank. I can still take a picture just by guessing so it would seem that the screen just went bad. Is there anything I can do. Help..Annie


Take a flash light for me and point it at the screen while the pictur got taken if you see a image then your little lcd backlight went bad, A camera shop can replace this little lcd there about $32 bucks.

what happends is the little lcd backlight over time just kciks the bucket nothig more you can do accept take it in if you want the luxury of looking at the output fotos.

Good luck, please do be considerate whiel passing threw fixya today and rate all experts involved in your issue, Leave feedback for us that helped or tried to help, not every question gets answered due to askers not following up with there ratings or feedback, thanks again.



Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Jun 15, 2010 | Pentax Optio A20 Digital Camera

1 Answer

Shows picture for a second when i press button than goes dark


Issues with back light:
Please do not attempt to diagnose if no competent.
Do at your own risk.
Check for 24 Volts power to the inverter board
No Power---Check Power Supply
Power Present---
Verify status voltage 3v to 5v on inverter board harness (plug)
Replace Inverter Board

Feb 11, 2010 | Tatung V30DMTT 29.6 in. LCD Television

1 Answer

My monitor doesn't display anything, though it's receiving input from the CPU. I know that input is being received because the monitor status light is green, and times out (turns orange).


Same thing happened to me! Went to bed last night, everything was fine. Woke up today, orange light came on, no display, slight flickering seen, but that's it. Cables and cords are fine, tried unplugging and plugging it back in, NOTHING. Totally dead. I'm guess off to buy a new one today. Typical made-in-China JUNK.

Jan 03, 2010 | Acer AL1916W 19" LCD Monitor

1 Answer

Light goes green but no display.


Definitely Power Supply Board. Check carefully for open 1/8 watt metal film resistors. They wont show signs of overheating but they can be open anyway. I've never been able to find a print either. Once you do find open resistors make sure you measure for shorted components in the associated circuit.

Jun 15, 2009 | Tatung P46ACTP 46 in. Plasma Television

1 Answer

Pictures are black


My 4300 works fine until this week. No picture display on the LCD screen. Settings like date, exposure, etc.. are fine on the LCD screen. Able to get into setup mode and the colour menu selection box is fine. This shows that the LCD screen is working fine. Prior to this happening, I notice that when I took pictures in zoom mode, the picture turn out to be orange. I suspect this is caused by electronic failure. Light entering the lens cannot be transmitted to the LCD screen. Some photoelectronic stuff had reached its MTBF (mean time between failure)? Is there a way to save this camera?

Mar 17, 2008 | Nikon Coolpix 4300 Digital Camera

1 Answer

LCD BLANK


Laptop Screen Dim, Blank Or Black - Notebook LCD Display Monitor ...

Click on the above link/ Follow instructions.....Good Luck.

Please dont for get to Vote.Thank You.

Dec 15, 2007 | IBM ThinkPad T30 2366 Notebook

6 Answers

TATUNG 30" LCD HDTV MONITOR WILL NOT TURN ON


I found a replacement Scheda power module at you guessed it, not at Toys R Us but rather at www.tvmodulesrus.com for $79. The same module is used in several LCDs, including our PowerSpec 30" LCD sold at Micro Center. It is listed under several numbers at TV Modules R US:

P/N: 6693006610
Model: HOAU242001(A)
Scheda Inverter PWB-0656-03

Nov 28, 2007 | Tatung V30DMTT 29.6 in. LCD Television

1 Answer

TV has sound with no picture display


Is it possible the pip and the main picture have been swapp and the main picture is showing as the Pip?Is a possibility,check it out and let me know.

Sep 29, 2006 | Tatung V30DMTT 29.6 in. LCD Television

Not finding what you are looking for?
Tatung V30DMTT 29.6 in. LCD Television Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tatung Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

CoppellTVRepair.com

Level 3 Expert

776 Answers

Cindy Wells

Level 3 Expert

5521 Answers

Are you a Tatung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...