Question about PC Desktops
If your computer has recovery management then go into the bios by pressing F2 when booting and make sure the D2D recovery is enabled. Then save and exit the bios. When the computer boots up again wait for the manufacturers screen to appear i.e. toshiba, HP etc.. and press Alt and tap F10 until the recovery management screen appears. This should enable you to restore your computer to factory default settings, although the recovery management will ask you for a password before it can start running. It will be the password that you entered when you very first set up your computer.
Posted on Nov 21, 2008
Tips for a great answer:
Jul 17, 2014 | Gateway GM5088 1GB DDR PC-3200 Desktop...
Aug 26, 2013 | Acer Veriton Z290G Desktop Computer
Nov 17, 2011 | Acer Aspire PC Desktops
Feb 17, 2011 | Acer Aspire T690 (AST690UP820A) PC...
Acer are cheap and they don't provide you with a factory restore disk. You need to make this factory disk yourself. I know how to do this, but it is to much for me to type and here is a really really good reference site for you to visit to get instruction to make your own factory restore disk. After making that restore disc, pop the disk into your laptop and turn of your laptop and restart and the factory restore program should start, if it should not start then go into your bios menu and have it boot from your Dvd-Rom and save, after full restoration, make sure you turn your boot priority back to where your Os is being installed, exm hard drive.
Jan 14, 2011 | Acer PC Desktops
Oct 18, 2010 | HP Compaq Presario SR1500NX (PX786AA) PC...
Jun 23, 2010 | E-Machines T4511 PC Desktop
Mar 27, 2010 | Dell OptiPlex GX280 PC Desktop
Jan 27, 2010 | PC Desktops
May 06, 2009 | Acer PC Desktops
2,832 people viewed this question
Usually answered in minutes!