An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
Re: print is to small
I have a solution for the issue which you are experiencing with.
As we do not have much information regarding the application from which you are trying to print, I suggest you to increase the font size while printing.
I believe, that you are experiencing the issue with Internet Explorer. If it is, so, please open an Internet Explorer window and click on View-->Text Size and select Medium which would resolve the issue.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check that the HP all-in-one print queue is not paused (Windows) or stopped
(Macintosh). If it is, choose the appropriate setting to resume printing. For
more information about accessing the print queue, see the documentation
that came with the operating system installed on your computer.
Check the USB cable. If you are using an older cable, it might not be working
properly. Try connecting it to another product to see if the USB cable works.
If you experience problems, the USB cable might need to be replaced. Also
verify that the cable does not exceed 3 meters (9.8 feet) in length.
I would say just turn this printer off and unplug it for an hour or so. Then see what it does when you turn it back on. If it still says clear paper jam then maybe there is a small piece of paper that you haven't found yet that the sensors are still seeing.
Check and clear any unfinished print jobs before turning the printer back on. Control panel>>>>printers >>>>then right click on your printer(hpofficejet 6210) properties-cancel print jobs
Ok this Sounds Crazy but it worked for me and its easy to try. Unplug the unit and pick it up and turn it side ways and gently shake it. Sometimes a small piece of plastic has broken loose and is interfering with the works and if you can dislodge it from its current location it will stop. Be careful not to hurt youself doing it. Also, I have one printer with a missing tooth on one of the gears and has been growling at me for a long time.
Best of Luck,