Question about Bathtubs & Whirlpools

1 Answer

Bathtub jacuzzi (motor turns runs but nothing coming from jets)

I fill up the tub and turn on the jets, but nothing is coming out of the jets? What does this mean? Is this something that i can fix myself??

Any help would be greatly appreciated.

Posted by on

  • 1 more comment 
  • jjones134 Dec 08, 2008

    I have the same problem.

  • Anonymous Apr 13, 2009

    I go to turn on the jets but i only here the motor running and nothing is coming out of the jets? Can I fix this myself or do I need to call someone?

  • Anonymous Mar 18, 2014

    jacuzzi tub jet does not work

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 68 Answers

Each Jet will have an adjustment many times right on the jet nozzle. Carefully try to rotate them counter clockwise to open up the jet. This assumes you can here the motor running.

Phil

Posted on Dec 09, 2008

1 Suggested Answer

frcs68
  • 1605 Answers

SOURCE: Bathtub jacuzzi (motor turns on but nothing comes out of jets)

open the the repiar panel and see if the pump is working. you may hear the motor running but not the pump.

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do jets turn on, then shut off?


the motor protection device is sensing to many amps. could be a flow restriction or the pump motor bearings are going bad.

Mar 06, 2016 | Jacuzzi Bathtubs & Whirlpools

1 Answer

Fill tub, press button, hear motor but no bubbles,etc coming from jets


Are the jets open? The center of the jets turn to adjust the pressure of the jets. If this is not the problem, there may be a problem with the impeller in the pump assembly. If you here the pump turning and not buzzing, it could be an air bubble in the suction tube. This tube is the one coming from the front of the pump, if the pump is higher than the tube coming from the tub, or if there is a high spot in the tube, an air bubble is a real possibility. If the tube is level with the pump, there should be no problem with air bubbles and the problem lies in the top part of this paragraph.

Mar 10, 2010 | Whirlpool 5' Jacuzzi Tub Bathtub Cetra...

1 Answer

My jacuzzi bathtub plastics pipes underneath are leaking due to being chewed by rats. So if i fill up the tub to the jacuzzi line holes, water leakes through the chewed pipes on to the wood floor...


no there is no solutions for plugging off the jets so the water doesn't go in them. you will have to pull the tub and repair the lines. no access panel just means you have to dig in!

Feb 23, 2010 | Whirlpool 5"x36" White Bathroom Drop-in ...

1 Answer

We have a new Jacuzzi tub and went to turn it on


check to make sure the pumps on and that its wired correctly and that all valves are open.

Feb 22, 2010 | Whirlpool 5' Jacuzzi Tub Bathtub Cetra...

4 Answers

Jetted bath tub has stopped working. Motor hums


look on the back of the motor there should be a shaft that you can try to turn to spin free because something inside the pump is blocking it. rate me if this is helpful.

Feb 15, 2010 | Jacuzzi EH0 / EH1 / EG9 Fuzion 6666 Corner...

1 Answer

My bathtub jacuzzi wont work. I reset the circuit breakers but nothing. I filled the tub but nothing comes out of the jets


make sure you have power to outlet that motor is plugged into,if so try pushing jet button in tub about ten times in a row quickly then on tenth push use as much force as possible and hold.if this does not work,air hose from back of button to pump motor may be disconnected.

Sep 30, 2009 | Maax URBAN 6032 HYDROFEEL AEROFEEL BATHTUB...

1 Answer

I know I can take a bath without turning on the jets. However; does the bath water with soap flow back into the jets? I like bubble baths, If I leave the jets off can I use the bubble bath without having...


The soapy water will fill all of the jets, tubes and the pump assembly. Will it hurt the tub if the jets are not running? The soap film will build up in the jets, tubes and pump assembly and can possibly cause damage if the tub is run at a later date. Contact the tub manufacture and see if there is a safe bubble bath you can use.

Aug 23, 2009 | Jacuzzi - Bathtub - Alcove - Navona -...

1 Answer

Bathtub jacuzzi (motor turns on but nothing comes out of jets)


open the the repiar panel and see if the pump is working. you may hear the motor running but not the pump.

Nov 21, 2008 | Bathtubs & Whirlpools

Not finding what you are looking for?
Bathtubs & Whirlpools Logo

Related Topics:

1,163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bathtubs & Whirlpools Experts

Mike

Level 3 Expert

4331 Answers

Tim Whalen

Level 3 Expert

3056 Answers

john h

Level 3 Expert

7167 Answers

Are you a Bathtub and Whirlpool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...