Question about Minn Kota Maxxum 70 Freshwater Bow Mount Trolling Motor

1 Answer

The plastic part in my bow mount Turbo 765MX(36lb.thrust) Minkota

The plastic part which keeps the motor from tipping back and rising out of the water broke into many small pieces and I have been unable to get any replacement part in this area. The motor runs fine but I have to hold it down by hand to keep it from tipping back when I turn up the speed. Where can I order or obtain this part?

Posted by on

  • Anonymous Apr 23, 2009

    same problem man. Looks like mine fell apart and there were 3 or four metal brackets of some sort. Make sure you're bar up front is straight and not bent as well. (the one its supposed to catch on)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Hello poorjohn, stroll to www.minnkotamotors.com/index.asp When you call ask for ext #406 and ask for Dave. Refer to my logon 'themoneypitt' He is a great guy. Merry Christmas.

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lookinf for a manual for a minn kota model 55d


call 800 number for minn kota on your motor. they are very helpful and will fax or emial you a manual for the motor. good luck.

May 28, 2010 | Minn Kota Maxxum 55 Freshwater Bow Mount...

1 Answer

Riptide RT65 24 volt with auto pilot goes nuts.


your magneto is shorting [ arcing on high needs, openup and replace magneto. call minkota and order a new magneto for your model, unless under warrantee.

Apr 13, 2010 | Minn Kota Riptide Sp Saltwater 70 Bow...

1 Answer

I have a Minnkota Riptide 80# thrust trollmotor.I have power to the head but motor will not run. It is a bow mount with twist grip control.When I mash on the power indicator button ,it lights up showing I...


1. possibly a broken connection to the motor where the propeller is located. 2. Also could be a bad motor. 3. Look for a fuse location for a possible blown fuse to the motor. 4. motor brushes could be the problem.

Nov 23, 2009 | Minn Kota Riptide St Saltwater 80 Bow...

1 Answer

Hard foot pedal


On the base of the foot pedal there is a tensioner for the cable. Try loosening or tightening that first. If you still have the manual from when you bought it, it is explained in deatil in there. It's a common issue - not to worry!

Jul 28, 2009 | Minn Kota Maxxum 70 Freshwater Bow Mount...

1 Answer

I need to replace the bearings in my Maxxum 65lb Thrust trolling motor.


If you never did this before , I strongly advise take it to a local shop....if you don't seal it correctly, you will end up buying a new one for water getting in.... I fix alot of things on my boat but not the trolling motor....your choice....GL

Jul 10, 2009 | Minn Kota Maxxum 55 Freshwater Bow Mount...

2 Answers

Bow mount 80lb to transom mount


Parts can be purchased from this dealer...There are schematics on the site for review....
http://www.northlandmarine.com/MinnKotaQuickRef.htm

May 06, 2009 | Minn Kota Riptide St Saltwater 80 Bow...

1 Answer

I lost istallation manual for minn kota power drive v2 50# thrust bow mount tolling motor, where can I find instruction manual?


Contact the people at this Email address. Minn Kota <Motors@johnsonoutdoors.com> The address is between the brackets. They emailed me a manual for a different trolling motor. They are nice folks. It will take up to a week for you to get a reply.

Apr 22, 2009 | Minn Kota Maxxum 55 Freshwater Bow Mount...

1 Answer

My brother inlaw got a minkota 40ta all terraine trolling motor that is supposed to produce 40 pounds of thrust. it does not seem to produce even close to that. is it possible that the motor is turning the...


I would check the battery. If you're using an old or under charged battery you will loose power for sure. Make sure you're also using a 12v deep cycle marine battery as this will ensure proper operation and a longer battery life.

Apr 18, 2009 | Minn Kota Edge 40 Freshwater Bow Mount...

Not finding what you are looking for?
Minn Kota Maxxum 70 Freshwater Bow Mount Trolling Motor Logo

1,028 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minn Kota Marine Electronics Experts

surfalke

Level 1 Expert

10 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10549 Answers

Are you a Minn Kota Marine Electronics Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...