My laser printer stopped working. It does not power on. I checked the surge protector that is plugged in and I tried it in another outlet but it does not work. If it is due to a power surge is there a fuse inside the printer that could be replaced ? To take it for repair might be too costly versus buying a new one. Any advice ? Thank you.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
52 Scanner Error The all-in-one has experienced an internal hardware error.
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket. 3. Check the FFC connection between the formatter and the scanner. NOTEDo not bend or fold the FFCs during the removal or reinstallation process. 4. Try connecting the product to a different power source or surge protector. 5. Turn on the power and wait for the all-in one to initialize. 6. If the error persists, replace the laser scanner assembly.
plug in a light into surge protector and see if it works if not surge protector is bad or battery is shot if it has one!!i have numerous surge protectors that went bad try plugging printer into wall outlet and if working its surge protector!!!
Check for any paused or failed print jobs. 1)Cancel or delete them. 2)Reboot computer. 3)Shutdown the printer for a few minutes.
4)Turn-off printer and computer, wait 5 minutes, turn on printer|turn on computer.
Let me know more information if you can.