Question about Cecilware GF-10 Deep Fryer

1 Answer

My Cecilware GF-10 LP deep fryer the pilot will not light.

I've checked that LP is getting to the fryer. It seems like the unit is just not getting gas. Please help....

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

On that cecilware fryer there is a regulator to the right of the pilot light unsrew the aluminum cap and take off cap then you will see a white plastic screw turn that screw clockwise until it stops this will give the fryer more gas this could be your problem the regulator is silver and inline with the gas pipe comming from the back

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Commercial fryer cecilware


The valve could be defective.

Sep 14, 2016 | Cecilware FMS-40 Deep Fryer

1 Answer

Cecilware fms40 fryer convert to lp gas


Most NatGas devices will convert to use of LP by changing the orifice.

GRINDMASTER CECILWARE F177A ORIFICE 52 1 16 LP GAS

Oct 05, 2015 | Cecilware FMS-40 Deep Fryer

1 Answer

I have a small counter top fryer set up for lp gas how do i change to nat


check the supplier for the conversion kit.the kit contains burner orifice, pilot orifice and gas valve spring which are commonly needed for conversion from propane to natural gas or from natural gas to propane.
****natural gas orifice has larger bore than propane, gas valve spring for propane is thicker than for natural gas.

Mar 29, 2011 | Cecilware FMS-40 Deep Fryer

1 Answer

My Cecilware fryer will not fire up, the pilot light is on.Is it likely a thermostat problem?


possible thermo couple problem not letting the gas valve open its the little tube that the pilot flame burns to

Jan 28, 2011 | Cecilware Deep Fryer

1 Answer

Hi I have got a cecilware deep fat fryer


Sounds like you need a gas regulator in the main line.

Either that or you are using a natural gas fryer on propane which is a no-no if not converted properly.

Dec 20, 2010 | Cecilware FMS-40 Deep Fryer

1 Answer

My Cecilware GF-10 LP deep fryer pilot will light, but won't stay lit after waiting the minute or so. Seems like the thermostat for the pilot is not working properly. Any suggestions?


The pilot sensor - a thermocouple or thermopile is probably the problem. They are fairly cheap and available at most hardware stores because they are also used in water heaters and furnaces. There are ways for a professional to check them but if you are going to change it yourself it is a cheap enough part to go ahead and try. Sometimes access can be a bit of a problem. You usually have to remove one or two of the main burners to get to it easier. Just don't try to light it up again until you have put them back in again.

Oct 19, 2010 | Cecilware GF-10 Deep Fryer

1 Answer

I have purchase 2 used FMP 40BSS fryers - originally Nat Gas - i want to convert them to LP - what is needed and can i do it myself?


To convert these to LP you must downsize the burner orifices and the pilot orifice. Also you must change the regulator on the gas valve to LP. Easy job.

Tom

Aug 14, 2010 | Cecilware FMP40BSS Deep Fryer

1 Answer

My pilot light would come on but i had to press it to position. And when i tried to release it to light up, the fire went out.


Sometimes the thermocouple gets so weak that it may require you to hold in on the pilot knob for a couple of minutes after the pilot is lit. If it still goes out then you need to replace the thermocouple or thermopile, which ever you have.
captrick

Jul 08, 2009 | Cecilware GF-10 Deep Fryer

1 Answer

Hw do I light the GF-8 countertop deep fryer?


Hello. This is what you need, here is a link to a gf-10, it is close enough to get you going. The directions are on page 4, picture of the valve on page 5:

http://www.cecilware.com/docs/N797A%20GF-10%20Manual.pdf

Hope that helped, and thank you.
If you have further problems, "ask me"

Apr 14, 2009 | Kitchen Appliances - Others

1 Answer

Pilot goes out


You definitely need to change the spring in the regulator. May need new pilot thermocouple

Jul 20, 2008 | Cecilware GF-10 Deep Fryer

Not finding what you are looking for?
Cecilware GF-10 Deep Fryer Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cecilware Kitchen Appliances - Others Experts

starztruck4u

Level 2 Expert

77 Answers

john h

Level 3 Expert

7409 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Cecilware Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...