Question about Operating Systems

1 Answer

SANSA E200 NOT SHOWING THE MENU SCREEN

Hello! My name is usman . I've been using sansa since one year but now it suddenly does'nt work at all .Whenevr , i power on sansa e200 ,it just shows the letters '' SanDisk '' and then suddenly the screen goes bright white and sansa e200 restarts again and follows the same step again and again .it does'nt show the main menu screen and with that result it can not be connected to the pc and cannot be identified by the pc too.What should i do .Plzz help me solve this problem and to get my sansa fixed as early as possible.

Posted by on

  • Anonymous Jan 05, 2009

    where to put the pin ? on the side there is only only the record button  on the left and memory card slot on the left .on what side are you talking about ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Try to format the SANSA E200.


You can do this by simply holding down the Power/Menu button for about 15 seconds. After the reset, any changes you have made to the e200 during its last use will be lost.

PLEASE RESET USING THE RESET PIN PRESENT IN THE SIDE.
AND FORMAT THE PLAYER . if this dosen't work your player is faulty

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sansa/Sandisk m240/1.GB Firmware information. I would like to be able to download firmware software for this device. If not a link for the older version of the firmware. Or maybe some suggestions for...



good day sir hope that this will help you to your problem....

What is a firmware, and what does a Sansa Firmware Updater do? Firmware defined
Firmware is the software code that powers your Sansa player. SanDisk actively and periodically updates the capabilities, functionality, and reliability of your Sansa player through this firmware. For optimal experience with your Sansa player, SanDisk recommends that you update your firmware with each new release.Firmware updates are free.


Sansa Firmware Updater
The Sansa Firmware Updater is an application designed to deliver the latest firmware, software support, User Manuals right to your desktop.

Download Sansa Firmware Updater.

Sansa players supported by the Sansa Firmware Updater:
- Sansa c200 series
- Sansa Clip / Clip+
- Sansa e200 series
- Sansa Express
- Sansa Fuze
- Sansa Fuze+
- Sansa View
Supported OS:
Windows 7, Windows Vista, Windows XP, Windows 2000 SP4

NOT supported:
Mac & Linux

NOTE: Administrative access is needed on your PC to run the Sansa Firmware Updater.

if this help you please rate me sir thanks you...

Jun 05, 2011 | Operating Systems

1 Answer

My sansa e250 is neeed ku reprogram.. my sansa e250 in black out the screen. need ku reprogram.


If you want to format your device, the best recommendation is to place it into MSC mode. This is the Sansa's mass storage mode and it allows the device to be treated as a drive. Go to the settings menu and find USB Mode. There are two choices, MSC and MTP. Choose MSC. MTP is for music transfer using a media player software like Windows Media Player. If you don't have a way to set MSC mode with a menu on the device, engage the 'hold' switch, and while holding down the left or right button (others report also using the center button), plug the device into the USB connector. Make sure the USB is already plugged into the computer. You shouldn't need to do this with a standard e250; the menu should work. After you have connected the device in MSC mode, right click My Computer and choose Manage from the menu. Find Disk Management and select it. The disks should be numbered, starting with 0 for the C: drive. You should see a drive that says SANSA E250, or something similar. Write down the type of file system if it is shown. My e260 says FAT32. I believe that the 2MB e250s are FAT, but check to be sure. There will be two partitions on the disk. The larger of the two is for your music files. The smaller is for when the device goes into "hibernation" - it's so you'll be back to the exact same song when it powers back on. Right click the larger partition and choose Format from the menu. You will see the format dialog. Set the volume label to SANSA E250 (I believe that's your device type), set the file system to what you wrote down earlier (do NOT choose NTFS!) and leave the Allocation unit size at "Default." Do not check either of the two check boxes. Click on OK. Keep an eye on the partition in Disk Management and you will see the percent complete. When it's done, look in the System Tray (by the date and time). You should see an icon for safely removing hardware. Double-click it to bring up the safely remove hardware dialog. Click on the USB drive representing your Sansa device and click Stop. Another dialog will come up and you'll have to do this again. Close the dialog when the device has stopped. The device will restart and initialize the music database. You're done! Now change to MTP mode and sync the device. Whenever you are in MSC mode, ALWAYS stop the device as I described in the paragraph above. That way you won't corrupt the drive. Hopefully. I haven't yet. My e260 is a gem!

Feb 20, 2011 | Operating Systems

1 Answer

Doesnt my sansa fuze show up in the computer


First be sure you have USB 2.0. if no luck go to Sansa website and download software with the readme files.

Dec 15, 2010 | Operating Systems

1 Answer

Hello, I have recently whiped my computer and now my computer does not recognize that my sansa is pluged in. I cannot find a way for my computer to recognize that its plugged in so I cannot put music on my...


Go to http://www.sandisk.com/sandisk-support/driver-download-wizard

and in the drop-down boxes, choose your sansa musicplayer (I can't see what sansa you have since you didn't write it down).

When you have marked your player and pressed the button to continue, then you'll go to a downloadpage for the drivers for your sansa player.

Good luck.

Aug 11, 2010 | Operating Systems

1 Answer

Hello ...my name is Dean Bush sr. From dw Bush Contractors inc. .. i have been using scansoft omniform Ver 4.01 for years and like it alot ... i tried to load it on my new computer and an msg said that I...


FYI - scansoft omniform Ver 4.01 support OS Windows 95, 98, 2000, or NT 4.0 - check here

OmniForm 5.0 - System Requirements - Check here

If you are using Win 7 the software is not compatible.

How to save your memory data - check here

Hope the links helps.



spacer.gif spacer.gif

Jul 04, 2010 | Operating Systems

2 Answers

Start Menu Picture Disappeared Suddenly


Turn the Welcome screen on or off It sounds as if you accidentally turned off the welcome screen. Here's how to turn that function on and off:



To turn the Welcome screen on or off
You must have a computer administrator account on a computer that is a member of a workgroup or is a stand-alone computer to turn on or turn off the Use the Welcome screen feature. Logging on at the Welcome screen is not available on computers that are members of a network domain.
  1. Open shortcutcold.gifUser Accounts in Control Panel.
  2. Click Change the way users log on or off.
  3. Do one of the following:
    • To specify that users log on to the computer using the Welcome screen, select the Use the Welcome screen check box. A user logs on to the computer by clicking his or her user account name on the Welcome screen. If a password is assigned to the account, the user is prompted to type it.
    • To specify that users log on to the computer without using the Welcome screen, clear the Use the Welcome screen check box. The Welcome screen will no longer appear when you start the computer. To log on to the computer, type your user name (and password, if you have one) in the standard Log On to Windows dialog box.
note.gif Notes
  • To open User Accounts, click Start, click Control Panel, and then click User Accounts.
  • Fast User Switching is available only when the Welcome screen is turned on. For more information, click Related Topics.
I hope this helps. Please let me know if you require further assistance.

Feb 26, 2009 | Microsoft Windows XP Professional SP2

2 Answers

Windows XP Pro Corporate with SP3 - wordpad problem


Just delete the wordpad.exe in "C:\Program Files\Windows NT\Accessories" and then rename the wordpad.backup to wordpad.exe

Hope this help!!

PS. would be a good job to copy wordpad.backup, just in case something goes wrong tomorrow or another day ;-)

Nov 30, 2008 | Operating Systems

Not finding what you are looking for?
Operating Systems Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Operating Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Are you an Operating System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...