I have a set of three panasonic telephones with 5.8 digital gigahert. there is so much static I can hardly hear. I don't even see a place to change the channels.
A possible cause for the static in your cordless phones could be dimmer switches around the area of your phone that causes static. Turn the switches completely off (not just turned down) and see if the static leaves. You can replace the dimmers with regular switches if that clears your static. If it does not, another trace for interference: you will have to take a portable radio and turn it to AM 550 mHz and tune it to the loudest crackling noise. Carry the radio around looking for the loudest static interference. Could be a loose connection in a receptacle or panel box. Any small malfunction can cause static on wireless devices.
I love the clarity and the speaker phone reception. My problem is that the phone cuts off at random...
(More)
I love the clarity and the speaker phone reception. My problem is that the phone cuts off at random in the middle of the conversation. Has anyone else had that experience with this phone set.
My phones are charged but I cannot get a dial tone because of a "busy signal" message. ...
(More)
My phones are charged but I cannot get a dial tone because of a "busy signal" message. How do I correct this?
Thank you.
MyKXTG7720E phone only rings once when somebody is trying to phone in to me .What shall I do ? I...
(More)
MyKXTG7720E phone only rings once when somebody is trying to phone in to me .What shall I do ? I have mislaid my instruction book .