HP Pavillion dv2000 is not detecting the network cable for lan
It is not detecting the cable for internet and in Manage Network connections for LAN the status is Network cable unplugged when it is not unplugged.It stopped working all of a sudden after a HP update. It is a windows vista os. I think the ethernet controller is Marvel Yukon. Any help is appreciated.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
for windows XP - go to control panel - network connection - eneble wireless LAN
for windows vista - go to control panel - network and connect sharing - manage netwrok connection - right click wireless icon then enable
for windows 7 - go to control panel - network and connect sharing - manage netwrok connection - right click wireless icon then enable
If you are connecting to the Internet using a wireless connection and your LAN card in the computer does not have a LAN cable connecting it to a hub or router then you will get a message "A network cable is unplugged".
If you don't use a wireless connection and you only connect to the your network/Internet then the problem is either the LAN cable has come loose in the computer's LAN card or at the router or the LAN cable is faulty.
Either the LAN card is faulty or the LAN driver is not installed and/or not configured properly or the LAN cable is faulty.
Check Device Manager to see if the LAN driver is installed, working and enabled. If not then re-install the LAN card driver.
If the LAN driver won't install or detect the LAN card then it maybe faulty and needs to be replaced.
Try a different LAN cable.
Is all the LEDs on in the modem?
Try rebooting the modem (power it off for 30 secs and power it up again).
Yep. Plug the ethernet cable into the computer. Reset the modem AFTER you plug in the ethernet cable. If it still cannot come online then go to your control panel, network connections (xp) and right click on Local Area Connection (LAN). Go to properties, then Internet Protocol, highlight and click on properties below that. It should be obtaining an IP and DNS automatically unless you know you have a static IP (most dont). Close those two windows and right click on the LAN again. Disable. right click again and enable. It should do it. Vista... Control Panel, network and sharing center, manage network connection, then do the LAN the same way you do in XP
Check in the Device manager to see if all the devices are enable and working.
The one with a yellow ? against that device requires a driver installation.
Is the LAN device OK?
How do you intend to setup your LAN, is it for Internet access or a home network?
I need more information on your problem, together with error messages.
Just connect the lan cable from the modem port saying "DataIn" to your laptop, select Automaticaly detect IP setting and let it assign via DHCP. Once it gains the ip (usually 3-4 minutes) use any java enabled browser (like ie,mozilla firefox) and go to any site it will automatically redirect you to Tata Indicom login terminal and fill in the required blanks and you are connected to the internet.
1. Make sure you use the LAN port.
2. Ensure the cable is in good condition. Try using new cable.
3. Ensure you installed proper network card driver.
4. Ensure the network card using correct link speed (100Mbps).
5. Try switching the link speed to Auto, if you're not sure.
These are the basics. If possible, try installing the latest firmware for your network card. Normally, downloadable from the manufacture's site.
For the laptop with no hard drive detected, this is most likely because Windows XP does not recognize SATA drives by default, which the laptop most likely has. To solve this, you will need to enter the BIOS setup utility (most likely Delete or F1 on startup). From there, you will need to change the drive mode to Compatibility mode. I'm not sure where this would be, but if you check in your laptop manual, you can probably find this somewhere.
For the 2519TU, download and install this for the LAN driver: ftp://ftp.hp.com/pub/softpaq/sp30001-30500/sp30264.exe it should work just fine.