Question about Intel Motherboard

2 Answers

Keybord fail when i setup my cumputer winxp it's run properly . someday later i fail my keybord. also fail on scrin keybord . then again i set up my windows but how days ? please tell me what can i do ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 26 Answers

We offer products and services of great value for the consumers and aim to develop a large customer base. Commentary have a look around and make contact with us in case you have any queries. Our company is a company representative and distributor of compatible electronics accessories, mainly of laptop accessories: CPU Fan, Inverter, Power Jack, Keyboard, Hinge and Video Cable; and even dslr camera and cam corder batteries and chargers, saws batteries, and other accessories.For more information: http://www.2egoo.com.... Apple MacBook 13 inch MA472SA A CPU Cooling Fan$26.99 Apple MacBook 13 inch MA701 A CPU Cooling Fan Shop Price: $26.99 For more information: www.2egoo.com >

Posted on Apr 25, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 134 Answers

Your PC might infected by root virus/trojan, If you have 2 harddisk or might 1 HD with 2 partitions.. you need to reformat all drive... or try to install virus protection.. recommendation: http://www.threatfire.com/ (Free - Not trial version)
ThreatFireThen run it and try again..
Hopefully this be of some help/idea. Pls post back should you need additional information, and also Show your Appreciation, to help other USER.

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My MOBO is ASUS P4VP-MX. My bios fails to start. I reset my pins for bios the computer will run but when I restart again it will gave message that that BIO checksum failed. Is this a battery failure. I...


This error is not the same as a cmos Checksum Error, which refers to corrupted values of the CMOS settings, the ones you set through the BIOS setup program. This error means the contents of the BIOS code itself are damaged.

Diagnosis: The BIOS ROM chip on the motherboard is probably faulty. It could also be another component on the motherboard.

You should make sure that all of the BIOS settings in the system are correct, by rebooting the system, going into BIOS setup and double-checking all the values (hopefully against a recent


If you have reset the CMOS memory you need to go into the BIOS setup screen and reconfigure the BIOS. To do that you need to press a key while the computer is booting. Usually F2 but can be other keys. It should tell you on the bottom of the first screen which key to press to enter BIOS setup.
If you don't know the settings the should be one for optimal defaults - use that one. You will also need to reset the time and date.
Save, Exit and re-boot and everything should then work.
During the boot process you will see on the screen to press delete to enter setup

Jul 02, 2011 | Intel ASUS X Series Motherboard P4VP-MX...

1 Answer

I need to instal - raid driver-


1. put Motherboard Cd (come with p5rd1vm) in cd/dvd rom.
2. BIOS configure as boot from cdrom.
3. restart machine Motherboard CD boot with press enter
4. command line shows 4 option
5. Select 1st option for exact and proper copy ULi sata driver for winxp.
6. Insert floppy press enter
7.you see d copy procedure.
8.then this floppy insert when winxp setup asking F6 for additional driver.

Jun 17, 2011 | ASUS P5RD1-VM Motherboard

1 Answer

I have hdd sata and i want to setup win xp on it but i cant winxp can not cont


Check your BIOS setup for the SATA interface settings. If it's set to "Native" or something to that effect, change it to "Compatible" or "IDE" or similar, and try installing XP again.
As a last resort, you may need to supply SATA drivers for your motherboard (unpacked, with all the individual files visible) during the setup, when it says something like "press [something] to supply 3rd party device driver". The problem is, that Windows expects it on a diskette...

Jul 02, 2010 | MSI PM8M-V Motherboard

2 Answers

Windiws cannot access the disk


try using the program Killdisk. This will permanently erase everything that has ever been written to the HD. Whenever I run into this problem, I run this on the HD and Presto, setup now recognizes the drive.

http://www.killdisk.com/downloadfree.htm

However, if this is a SATA drive, sometimes certain drivers must be loaded first. These drivers can be found at the manufacturer website. Once downloaded, you will have to use a floppy disk to load them (or usb flash drive if it is set up as bootable device). To load the drivers once downloaded and stored on bootable device, you will have to run winxp setup and press F6 when prompted at the bottom of the screen to load third party raid or scsi drivers. When you press F6, nothing different will happen. Setup files will continue to copy and setup will again try to look for your hard drive. When it does not find it, you will be prompted to look for drivers on your bootable device (the floppy/usb drive you loaded the drivers on).

Just note, after using killdisk, data recovery will not be possile for the partition you erased by using killdisk. What this means: Everytime your format a HD using Fdisk or windows setup, nothing is technicaly erased until that particular spot on the HD is written over, that is how data recovery businesses restore lost or erased data. Once you run killdisk, it re-writes over all data making it completely invisible to partition recovery programs. If you are not worried about any data on the disk, then this should be no concern for you, just some info.

If this does not help, I will be happy to walk you through the manual HD setup in winxp setup procedure, it is quite easy once you find what you need.

Hope this helped!

Oct 07, 2009 | Asrock K8Upgrade-VM800 Motherboard

1 Answer

Asus K8V-8 Deluxe and SATA F6 installation issue


You might have a bad version of the text mode driver for it.You can make your own slipstreamed XP install CD with my brief instructions to include SATA drivers so that there is no need for F6. http://rapidshare.com/files/211421782/nLite_Instructions_XP.pdf

May 02, 2009 | Motherboards

2 Answers

WHEN I START MY COMPUTER KEYBORD AND MOUSE NOT WORKING PROPERLY.


hmmmm maybe you have a motherboard defect.... or try to change your mouse or keyboard with a new or borrow it from your friend then try it... if it has the same problem your motherboard is damaged.. ^^

Feb 03, 2009 | Intel D101GGCL Motherboard

2 Answers

Help in need of advice


Try to delete the partition of your HDD and then create another one an format it to NTFS. Set the bios to boot from CD, Once the setup disk for XP loads, Try to follow the steps I provided.

For the Best OS, you need to make sure the computer is able to get the requirements for certain OS.
For WinXP atleast 256 MB RAM(recomended 512mb),For Vista 512MB(recommended 1gb)

May 10, 2008 | Intel Server Board STL2 Motherboard

1 Answer

Bad SATA data cable connector or drive?


Hi miss, is you're new SATA being seen in you're bios?
To check this. At boot up press the Delete key every two seconds until the bios main menu loads.
You should see the new SATA listed here. If you do not see you're new drive listed than shut down the PC & unplug the power cord. Remove the data cable & clean it with a cotton swab & some house hold alcohol. (no dripping). Wipe off both ends of
the data cable & the drive's connector. ( Allow time to dry).
Re-connect every thing & again check you're bios. If you're drive is listed than you can use you're current windows to format the drive. I gather you're current windows is running correctly.
If you get a error message from windows during format, do not worry, yet!
I suggest you download the drive's Mfg's software tools & use this to test & setup the SATA drive. Locate the white sticker on the new SATA drive. There you'll find the model number & serial number. Write the drives information down on paprer for later. You can register you're SATA drive later at the Mfg's site.
Most Mfg's have bootable software for a floppy disk & the same to creat a bootable CD-ROM disk so you can setup & test you're new drive which is what I am suggesting you do. You will need to disconnect you're other SATA drives while using the bootable software. (Just unplug their data cable). No need to unplug the power to the drive - (s).
I am sure you will be able to setup and test you're new drive. Once finished, reconnect everything. Double check everything before closing up the case. Boot you're system. Windows should see you're new drive.

Good Luck!
If I can be of more service, just ask.

Mike

Apr 15, 2008 | ASUS A8N-SLI Motherboard

2 Answers

I need to recharge motherboard generationext bios


help please everytime i unplug my PC when i reboot it again i always have to setup my bios settings. my motherboard is P4VP-MX...

Mar 26, 2008 | Intel Motherboard

1 Answer

Boot Problem of Xp


go to bios setup properly
then setup your OS press enter

Mar 03, 2008 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...