Question about SanDisk Cruzer Micro 4GB USB 2.0 Flash Drive

1 Answer

SanDisk Cruser Micro

My computer is not recognizing my 4 GB SanDisk jump-drive. It worked 1 hour ago. The light doesn't come on unless I wiggle it a little. Is there any way I can retrieve the data?

Posted by on

  • 4 more comments 
  • pyecat54 Nov 22, 2008

    I should have stated that I did try it on other computers as well. The USB ports are working fine as other jump drives I have work.

  • stevenmiles Nov 23, 2008

    I have a cruzer Titanium 4 GB. My granddaughter pulled the drive from the port while running and now the computer does not reccognize it. When I plug it it the blue light comes on then stays off.

  • umdnjay Feb 04, 2009

    I am having this problem with a SanDisk 1GB titanium flash drive. I have tried it in multiple different computers. All that happens is the blue light flashes on then stays off and none of the computers can open the drive.

    Is there some way to replace the connector so I can retrieve the data?

  • Anonymous Feb 06, 2009

    Unable to recognize 4GB thumb drive

  • Anonymous Feb 17, 2009

    i cant go to my saved files

  • bbbach Feb 17, 2009

    4gb Cruzer USB just stopped working - no light - does not engage and I have tried it on multiple computers.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Sounds like the usb ports on your computer are going dead.. You may have to use your drive on another computer to retreave data then put it on cd..

Posted on Nov 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I password protect a Sandisk Cruser 4 gig flash drive on a Mac?

go to Sandisk site there is free software for Cruser Flash just donwlod that software it will sun in Gruser only

in that software option is thr to have password for it

May 02, 2010 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

2 Answers

When I plug in my cruser micro 4 gb the computer says it only has 6.66 mb of memory and I cant download anything of any size. What is wrong?

Connect it to a diffferent computer.

When a "drive-letter" is assigned, e.g., 'F:' then:

Click Start
Click Run
Type CMD and press ENTER
Type DIR F: /S /A /P and press ENTER

where 'F:' is the assigned drive-letter.

How many files are listed?
How much space is "used"?
How much space is "free" ?

Nov 13, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Cruzer Micro 4GB will not light up or be recognized

You used the drive for 12 hours. maybe it was damage due to overheat.
when you plug the drive, did you hear a beep?

Aug 14, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

SanDisk 4 GB Cruzer U3 Micro USB enhanced for Win ReadyBoost

i would have to suggest that if you are going to use ready disk it is on a usb stick that doesn't have partitions... basically why you have three different drives show up. i hate the u3 partion on my scandisk and will be deleting them.


P.S. i used to live in st hubert .... many years ago

Sep 04, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

2 Answers

Sandisk 4GB pendirve not recognised by PC - Driver issue?

Dear Friend,
I have problem in my pen drive which which built by SAN Disk its storage capacity in 4 GB i am using winxp but this pendrive is not recognize by OS pls solve my problem


Aug 09, 2008 | SanDisk ULTRA II 4GB Compact Flash Card...

1 Answer

Sandisk Cruzer 8 gb micro usb not being recognized

Do you have another USB port you can use? Is this connected to a USB hub?

Jul 26, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Cruzier 4.0 pendrive is not recognized by my computer

the home computer has a small chip onits mother board called disk controller. its this controller which recognises the software driver is corrupt and needs reinstallation or the hard ware controller is faulty.

Jun 09, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

5 Answers

Stopped working COMPLETELY!!!!

Had same problem.

I wiggled back and forth the part that goes into the USB port and the drive was recognized and I could copy my files onto my hard drive.

I had this problem with a different make USB flash drive and used the same procedure to get the files back.

I think that some connection inside the flash drive works loose after a while.

I am not going to trust these drives for files storage, but only to transfer files.

Jul 27, 2007 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

Not finding what you are looking for?
SanDisk Cruzer Micro 4GB USB 2.0 Flash Drive Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Electronics - Others Experts


Level 3 Expert

8073 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Carlos Calvo

Level 1 Expert

18 Answers

Are you a SanDisk Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides