VER 1.00: can't navigate with the up, down, left & right keys

Hello -

Apparently you do not have the user's manual for the phone.

This is a link to the manual (PDF format - Adobe Acrobat Reader software - free) for your model of cell phone:
https://d28dq596ebml6z.cloudfront.net/media/wysiwyg/att-z223/AT_T_Z223_User_Guide_English_-_PDF_-_8.43MB_.pdf
Note: The instructions are from AT&T, but are the same for the Tracfone.

The instructions for entering text begins on page 11 (image 9) of the instructions.

When you are in the messaging option (the envelope icon), and have chosen Create New Message, look at the white rectangle near the top right of the screen. To change from digits to letters (which will display in that small white rectangle), press the # key (lowest left corner of the key pad.)

You should then see a pop-up window offering you choices of letters (capitals only, capital followed by lower case, lower case only), digits, etc. Use the Up and Down navigation buttons to move to your choice for input and then press OK button (in the middle of the 4 navigation keys.)

Best wishes.

fr left + white
fr left - white/black
fr right + grey
fr right - grey/black
rear left + green
rear left - green/black
rear right + purple
rear right - purple/black

hope this helps thumbs up pls

try this steps if it will work

1. From the standby screen, press the right soft key for Menu
2. Select Settings (9)
3. Select Phone (4)
4. Select Airplane Mode (6)
5. Highlight either On or Off, using the navigation keys
6. Press the left soft key for Select to save the Airplane Mode setting

Hi,

Your screen is showing a black picture because the closed caption function has been activated. When this closed caption mode is turned on the screen will display an 80% black picture.

To turn off the closed caption and regain a full screen please follow these steps;

1) Press the Menu button

2) Use the up and down arrows to navigate to Closed Caption

3) Use the right or left arrows to select it.

4) Use the right or left arrows to select OFF

5) Use the up or down arrows to select Finish

6) Use the right or left arrows to save the settings and exit.

You should have your full screen back now minus the annoying black box.

Thanks for using FixYa. A rating is appreciated if the solution has worked for you.

Clarion uses the industry standard wiring colors. Not every unit will have all of the listed wires

SPEAKERS:
White = Left Front +
White/Black = Left Front –

Gray = Right Front +
Gray/Black = Right Front –

Green = Left Rear +
Green/Black = Left Rear-

Violet = Right Rear +
Violet/Black = Right Rear –

POWER/ACCESSORY:
Yellow 14ga = Battery Main/Memory
Yellow 18ga = Battery CeNET Power/Memory
Red = Accessory (ignition on)
Black = Ground
Blue = Antenna Turn On +
Blue/White = Remote Turn On (amps) +
Orange/White = Dimmer
Brown = Phone Mute
Orange or Mint Green= Parking Brake Video Lockout
White/Red = CCD (camera) input instant on +

RCA Cables:
Gray = Front Output
Black = Rear Output
Purple = Non-Fade or Subwoofer Output

Clarion uses the industry standard wiring colors. Not every unit will have all of the listed wires

SPEAKERS:
White = Left Front +
White/Black = Left Front –

Gray = Right Front +
Gray/Black = Right Front –

Green = Left Rear +
Green/Black = Left Rear-

Violet = Right Rear +
Violet/Black = Right Rear –

POWER/ACCESSORY:
Yellow 14ga = Battery Main/Memory
Yellow 18ga = Battery CeNET Power/Memory
Red = Accessory (ignition on)
Black = Ground
Blue = Antenna Turn On +
Blue/White = Remote Turn On (amps) +
Orange/White = Dimmer
Brown = Phone Mute
Orange or Mint Green= Parking Brake Video Lockout
White/Red = CCD (camera) input instant on +

RCA Cables:
Gray = Front Output
Black = Rear Output
Purple = Non-Fade or Subwoofer Output

Hi... had u been able to solve ur problem.. since I am also facing the same problem... let me know if you have a solution to sort out this. Thanks in advance. Amol.

Thanks for the assistance. It is a problem that the mfg will have to fix.

One configuration option for the F700 is to turn off the LCD when taking pictures and use the view finder-- this saves battery power. If you press the DISP button to the right of the LCD should turn on.
.
To turn the LCD back on-- Press MENU/OK (you should see the SELF TIMER screen). Press RIGHT ARROW to select the SET option. Press UP ARROW to select the SETUP option. Press MENU/OK. You should see the SET-UP screen. Use the UP/DOWN Arrows to navigate the options; use the LEFT/RIGHT Arrows to cycle through the options. The IMAGE DISP and the LCD options control when the LCD is powered on.

Here's how send a picture in a message.

1. Press the Center Select Key
2. Press the Navigation Key to scroll to Messaging, and press the Center Select Key
3. Press the Navigation Key and scroll down to Create Message, and press the Center Select Key
4. Press the Navigation Key and scroll down to New MMS Message, and press the Center Select Key
5. Press the keypad to enter desired text
6. Press Options, by pressing the left soft key
7. Highlight Insert, and press the Center Select Key
8. Highlight Picture, and press the Center Select Key
9. Press the Navigation Key and scroll up or down to the desired picture
10. Press Insert, by pressing the left soft key
11. Press Send To, by pressing the right soft key
12. Press the Navigation Key, and scroll down to desired contact, and Press the Center Select Key
13. Press Send, by pressing the right soft key

You can find this, and other helpful stuff at

this page on the Motorola Support site

Don't forget to rate this solution once you've tried it !