Power on without pressing power button if conecting with power
Hello my acer laptob travelmate starting to work without my pressing on power button when i conect it with power source (charger} and every time ask me to renew cmos settings i i renew cmos settings and save changes after restarting my laptob shutting down and stop workin until i disconect the cmos battery please help me to solve this problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
do the HARD reset. Disconnect the power adapter +battery. Hold the power button by 30 seconds. And then reinstall the power adapter and battery again and test again. this will solve the problem God bless you
(must connect to the internet) 1)control panel>hardware and sounds>device manager 2)other devices 3)then press the bluetooth activator on your keyboard and see if there will be appearing "Acer Module" or "Bluetooth device" 4)right click on it>Update Driver>Search outomaticaly 5)wait untill the driver will successfully dload and restart your device
First power drain your system take the battery out unplug the acadapter and then push the power button on the laptop and keep it pressed for 2 mins without connecting any power souce this will drain the static power from the syteme after few mins connect the battery first and then connect the ac adapter that should take care of the issue.
There are probably some corrupt files on the harddrive or there is damage on the hard drive. I would suggest to try using the windows setup cd or sony recovery cd to restore the system back to normal, if the problem is not solved by that then you most likely have a hardware problem which is most likely in the harddrive, might have to replace it, they don't cost much.
if you press f8 in start up to get the advanced startup menu, select safe mode.
start in safe mode and login
press start -> now run -> type in Cmd -> Type in the shell window -> chkdsk /F /X /R C:
if asked select Y to perform the operation on next start up.