Question about NEC Versa VX Notebook

1 Answer

Still can't access the web

Hi- I bought the wireless USB drive you recommended and installed it according to the cd that came with it. It's now installed but now the ISP is showing no dial tone. Is this a fixable problem? NEC Versa FX (Model: VF2A7AA-000-000)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,342 Answers

There will be no dial tone for wireless access as you do not use a dial up modem. Rather you should be seeing a signal strength indicator, usually in the lower right hand corner of your desktop. If you have purchased wireless access from your ISP you should have a wireless access point that the USB wireless adapter will receive the signal from. Follow your ISP's instructions for setting up wireless access. If your provider is Sierra Wireless here is a link to their support page. Click Here

Here is a link to the NetGear support page for the USB adapter. Click Here

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have bought a netgear wn111 wireless usb adapter and i have no driver cd. As i have bought this to connect my pc to the wireless network, i cant access the internet to download the drivers onto the pc. I...


If you have access to the Internet using a LAN cable, then download the Netgear wireless USB adapter to install the driver. After downloading you can remove the LAN cable.
You can also save the driver from your laptop to an USB memory stick and then install the driver in your computer with the USB memory stick.

May 23, 2011 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

Hi there, I just bought a new computer to which has the home network connection but my old computer now needs to be configured with my new NetGear WNA1100 WirelessN 150 USB Adapter to be able to have...


Since your computer can't read cd and you have the installation cd what you can do is to copy the contents of the cd to a flash drive from another system then use the flash on your own pc, and install it from the flash. Try this.

Thanks

Dec 14, 2010 | NetGear WNA1100 WirelessN 150 USB Adapter...

3 Answers

How do I get the HP 6500 to print wirelessly?


For installing a wireless printer on Windows XP, wireless router is an essential device. Follow the recommended steps mentioned on the installation CD of the router, and set-up a wireless network. Since several computers or laptops will access the printer, it is recommended to connect the wireless printer to the main computer through the USB port. To begin the installation process on Windows XP, access the network setting in the Control Panel, and activate the file and printer sharing option in the LAN setting. This will allow the operating system to recognize the availability of a wireless printer. Now, click the Start button, go to Devices and Printers, select Add a Printer option. Click the second option- Add a network, wireless or Bluetooth printer. The computer will search for available printer and reflect it on the screen. Click Finish; and the printer is ready to begin the printing process. get more detail for Wireless Printer Setup. Hope this helps you.
Thanks
Michel Smith

Dec 13, 2010 | HP Officejet 6500 Wireless All-in-One...

1 Answer

I BOUGHT AND INSULTED THE BELKINS N WIRELESS USB ADAPTER ON MY DESKTOP COMPUTER THAT USES WINDOWS XP. I ALSO BOUGHT A $1300.00 VAIO SONY LAPTOP WITH WINDOWS 7 AND TRIED TO DOWNLOAD THE SAME WIRELESS...


Hi bobbie ....

I got your issue ...

I think your adapter is not getting installed with the cd

So please go to this link www.belkin.com/support

Thanks.......
With regards ...
Priya

Oct 20, 2010 | Belkin N1 Wireless USB 2.0 Network Adapter...

4 Answers

Quick instruction to install leeds asi/66887 wireless mouse


You need installation disc, if you have lost the CD, than go to this site Driver Update Software for XP Vista 7 8 and download their update tool. I hope I helped.
Micky

Feb 12, 2010 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Can't get it networked on my mac that has windows parallel xp cant find it


Hi
I recognize the importance of resolving this issue and I look forward in providing you with the necessary assistance you need.

Problem: Cannot get network on the Mac not specified
OS : MAC computer Windows installed on it
Printer Office jet 6500 Wireless.


Solution :
There are few thing which are required to know before we start trouble shooting

IMPORTANT : Before you can install the product, your wireless network must already be set up. (To set up your network, follow the instructions that came with your particular access point.)

IMPORTANT : Before you can install the product, you must have the following information about the network:
  • Network name : The network name is the SSID (Service Set Identifier).
  • Password : WEP key or WPA passphrase


For a new product:CD installation is a quick and easy method and if you do not have a CD, you can download the software you need.

CD installation : CD installation might not work if you are installing the product on a computer running a newer operating system that released AFTER the HP product released as the software on the CD is current to the date of the product release.

Downloading the HP Drivers :Downloading the software provides the best results for your older product. Even though it takes more time than using the CD, downloading the latest software can help you avoid installation issues. Downloading is also the recommended method if your computer operating system released after the HP product released. The software that you can download from the HP Web site is the most current software available for your product. HP often updates software and drivers AFTER the product and CD release to the market ..




Wireless installation: If you have not previously installed the software, follow these instructions.
Step one: Prepare for installation
1 Make sure that you have the following requirements before you begin:
  • Network name: The network name is the SSID (Service Set Identifier).
  • WEP key or WPA security passphrase
  • A computer that is connected to the wireless network.
  • Internet access. HP recommends broadband Internet access such as cable or DSL.
  • Your wireless-capable HP product. Place it close to the computer during the installation procedure.
  • A USB cable (used only during installation).
  • Administrator privileges or password
2. Make sure the product, access point, and computer are all on, and that the computer is connecting to the wireless network.
3. Connect the USB Cable to the rear port of the HP product and to any USB port on the computer.
4. Exit all applications running on your computer.Install the software
To install the product software, follow the steps for the method that you want to use (CD or download).
Method one: Install the software with the software CD
  1. Insert the Macintosh product CD into the CD drive of the computer.
  2. Double-click the HP software disc icon that displays under the Xp/Macintosh HD icon.
  3. Double-click the HP Installer icon. The HP Installer program opens.
  4. Follow the on-screen instructions to start the installation.
  5. When prompted to set up your device and software, select Continue .
  6. If a check mark does not appear, select Configure your device for a wireless network , and then select Continue.
  7. Follow the on-screen instructions to finish installing the software
Option two: Change connection type
1. Open HP Device Manager.
2. From the Information and Settings drop-down menu, click Setup Assistant . 3. The HP Setup Assistant window opens.
4. Follow the on-screen instructions to change your connection type to an existing wireless network.

Jan 04, 2010 | HP Officejet 6500 Wireless All-in-One...

1 Answer

I had computer issues last week and lost everything, now I'm trying to get my wireless set up again and the adaptor wont work (wont blink)


Hi,

I just want to tell you that once your computer formatted then all the drivers for the you usb adapter removed from your computer and you required to reinstall the drivers for you computer.

1. I can recommend you that you got the CD for your usb adapter. You can install the usb adapter on your computer with the help of CD.
2. Secondly in any case if lost the CD i am providing you a link for your adapter you go to this website and download it from this website according to the version for your adapter

http://kb.netgear.com/app/products/family/a_id/1268

Thanks & Regards
Jaspreet Singh Sani

Oct 16, 2009 | NetGear : WG111 54 Mbps Wireless USB 2.0...

2 Answers

I have just brought dell latitude e5500 laptop. i wanted to connected the hp officejet 5610 scanner to my laptop but am not able to do. please help


hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....

733bedd.jpg8d0783d.jpg

http://www.hp.com/printer/prob676ijt65/solution

ab19

Jul 11, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Installation not installating!


Did you try this ?? there is a self help page on the Netgear Web site for the WG111V3 
http://kbserver.netgear.com/kb_web_files/N101741.asp

Hope this helps

Dec 23, 2008 | NetGear : WG111 54 Mbps Wireless USB 2.0...

2 Answers

Converting to a wireless printer


hi,

if you hav a usb port on the printer you can make it wireless by using "wireless upgrade kit"....

u have t connect this device to the usb port on the printer and you can make it wireless. and if you dont have a usb port on the printer, you cannot make it wireless

thanks and regards
agnel

Mar 05, 2008 | HP PSC 1610v All-in-One Printer

Not finding what you are looking for?
NEC Versa VX Notebook Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Computers & Internet Experts

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Cindy Wells

Level 3 Expert

4979 Answers

Are you a NEC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...