Question about Washing Machines

1 Answer

My beko washing machine will not spin. the door does not stick shut which when turned on its ment too. not sure whether it has something to do with door or atual system

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hello there it sounds like a door interlock problem
where the catch goes into the body of washing machine is the door interlock held by 2 screws turn electric of and plug out of socket and take lid of washer at the front of machine between drum and casing where catch goes in you will see interlock release cable socket and undo screws keep one hand on interlock so it does not drop down and take this with serial and model number to your washing machine spare outlet or currys parts master online
yours ross

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My beko wmb61431s will work in spin or rinse mode


check the clutch, the belt, the motor coupler, the door switch,

Feb 25, 2015 | Beko Washing Machines

1 Answer

BEKO WM5120W filling with water program clicking water draining but the drum does not turn belt is ok and pump


DOES IT AGITATE? SOUNDS LIKE A BAD MOTOR COUPLER OR DOOR SWITCH, ALSO A BAD WATER PRESSURE SWITCH WILL NOT ALLOW IT TO GO INTO WASH, HENCE NO SPIN OR WASH CYCLE? SOME MACHINES HAVE A BELT SAFTY SWITCH ON THE MOTOR, THAT MAY GO BAD AT TIMES ALSO AND SHUTS OFF ALL ACTIVITY

Sep 26, 2014 | Washing Machines

2 Answers

Washing machine fills with water but then won't wash, spin or drain


Hi Claire if your beko washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Jan 28, 2014 | Beko Washing Machines

1 Answer

Hi, my Beko washing machine, WMA 1512 W stops half way through wash cycle and leaves conditioner in drawer, won't rinse and I have to manually turn dial to spin, any ideas please?


Beko washing machine, WMA 1512 W stops half way through wash cycle and leaves conditioner in drawer This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Jan 26, 2013 | Beko Washing Machines

2 Answers

My beko 1613 washing machine wont drain, and how do i operate the dial


Hi if your beko 1613 washing machine wont drain or has a spin problem then you have to check the carbon brushes first.
Also check all waste pipes are clear and inspect the pump I have included this video below. At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes

Mar 10, 2012 | Beko Washing Machines

2 Answers

Beko 1510S washing machine stalls at spin


check to make sure you have't got the rinse hold button pressed in. If it is your machine will stop at the end of it's rinse cycle and will not go into its final spin.

Jun 15, 2008 | Washing Machines

2 Answers

Beko 520w wasing machine


Hi see the last video on this it will show you test mode or if your beko wma10w washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Mar 08, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...