Question about Lexmark C510 Laser Printer

Open Question

Why 88 black toner cartridge for C510 Lexmark empty when replaced

Black toner cartridge for C510 Lexmark printer was replaced when it showed it was low. It printed fine until the next day when on the display it said '88 Black toner empty'. Why?

Posted by on

  • Anonymous May 04, 2009

    i change the toner cartridge and after printing fine for a while I get the error 88 black toner empty even though the cartridge is not empty. How can I force the printer to print (overcome the error message)?

×

6 Suggested Answers

SOURCE: Samsung SCX-4200 All-In-One toner cartridge resetting

i cannot fine this printer fuser.. where can i find in this printer..

Posted on Aug 30, 2008

  • 192 Answers

SOURCE: After replacing black toner cartridge printer displays Drum Low

Ask you companey that surives you printer to look at it

Posted on May 20, 2009

xptareq2000
  • 1447 Answers

SOURCE: A Lexmark C510 printer prints horizontal 1 1/2 blk and mag lines

it is the problem your copier drum unite

Posted on Jun 28, 2009

JackHeath
  • 1049 Answers

SOURCE: replacing the toner cartridge

No it isn't, toner does not distribute evenly from the cartridge, when it says it is out you often can shake it and get another few weeks out of it. However, when you get to the point your shaking after every job, stop. I have been told the printer can be damaged by running a cartridge bone dry.

Posted on Nov 13, 2009

Testimonial: "you be da bom"

  • 99 Answers

SOURCE: Refilled a Lexmark c910 black toner cartridge.

Yes you understand, it is problem Toner chip.When finished your toner then it chip has been disable.It is a technical policy.If you can refill it and again use.You must be reset the chip.Help www.chip resetter.com

Posted on Dec 06, 2009

  • 74 Answers

SOURCE: Lexmark C510 995 Service Engine Error: I can turn

shut off power to printer. Pull your photoconducter unit out and check the position of the black marker located on the edge of the tranferbelt. I know one time I was fortunate enough to fix this error by rotating the photoconducter belt so that the marker was in a different position. Becareful not to touch the photoconducter belt (green shiny part) if at all posible. Reinstall the unit and power up.

2. If the above trick doesn't fix it after turning the printer off for a few minutes and you still get the same error when printing... You will have to replace the photoconducter unit. I wasn't as fortunate the second time I attempted the above trick and ended up having to order a new one. But hey its worth a try!!

Posted on Jan 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, can Lexmark C510 printer print black and white only?


YOU CAN GO TO THE PRINTER PRINT PREFERENCES AND CHECK THE BOX FOR GREYSCALE ONLY.

Jun 04, 2012 | Lexmark C510 Laser Printer

1 Answer

Not printing


The problem could be the Developer Clutches not turning the cartridge. Thus toner does not develop and get transferred to the photodev cart. This may be due to a missing retainer clip try replacing the clutches. That should solve the problem.

Dec 09, 2009 | Lexmark C510 Laser Printer

1 Answer

Lexmark C510 is making grinding noises while printing large jobs


I found another posting stating that the culprit was the black toner cartridge. Sure enough I changed our black cartridge and the grinding noise has stopped. No wonder the grinding noise was not happening all the time only when the black cartridge got low. Thanks for the help!

Oct 15, 2009 | Lexmark C510 Laser Printer

1 Answer

We have a Lexmark C510 printer that is broken


The Part in question is a main drive motor for the print head. Pretty much toasted

Apr 28, 2009 | Lexmark C510 Laser Printer

2 Answers

Printer Color problems..


Seriously, buy a new printer. Companies sell toner, not printers! The printer is basically a "freebie" and is a marketing vehicle to sell toner. I tossed my C510 into the dumpster. It had four new toner cartridges. System diagnostics said that everything was at 95% or better. The printer had about 1600 prints on it. The first set of toner cartridges (full at purchase!) printed great. Then, I got dotted lines on clean prints. Or, I would get washed out, yellow tinted print and often, there was no black print. I called a printer repair shop and they laughed and told me to chuck the printer - they were suprised it lasted through the first set of cartridges. Lexmark literally "ignored me to death."

I will NEVER buy another Lexmark. The Brother and HP color lazers are probably the best bet. I have two HP B&W's that are paper pumps - an old 4V and a 6MP. The sad part is that I paid a bit more for the Lexmark than the competing HP. You live and then you learn!

Feb 25, 2008 | Lexmark C510 Laser Printer

2 Answers

Lexmark C510 Laser Printer- Grinding Sound on startup and while printing


Thank you Krissy! I had the same problem with the horrible grinding noise.

I took out all of the toners and the photo developer and noticed that my Blue toner was leaking all over. After reading your post, I tried replacing the toner. It worked!!! No more noise - and no more mess!

Jan 30, 2008 | Lexmark C510 Laser Printer

2 Answers

Lexmark C510


try to clean the toner from tissue paper or if you want good quality you replace the toner or copen the cover of printer toner and clean is there any ink powder is there. bye

Sep 21, 2007 | Lexmark C510 Laser Printer

Not finding what you are looking for?
Lexmark C510 Laser Printer Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...