Question about Televison & Video

Open Question

Requirement of service manual

TH-42PV600H - i want service manual ( in india )

problem

The suspected board which is faulty is TNPA3814 and TNPA3911can you suggest mumbai dealer who can provide me service manual

Posted by on

5 Suggested Answers

MDoe
  • 156 Answers

SOURCE: service center

Hi

NEC Support Contacts http://www.nec-computers.com/page.asp?id=158

IBM Support phone list - http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=YAST-3P2QYL&sitestyle=lenovo

Mike

Posted on Mar 29, 2008

SOURCE: dital camera repairer in mumbai india

CANON MASTER SERVICE CENTRE 6TH FLOOR,CENTER POINT BLDG,
S.V. RD, NEAR TRIBHUVANDAS BHIMJI ZAVERI,
(JUHU TARA ROAD-JUNCTION)
SANTACRUZ (W),
MUMBAI
MAHARASHTRA
Pin : 400054
Tel : 022 67605000-01

Contact Person : Sheetal More

Posted on Apr 09, 2008

  • 1 Answer

SOURCE: not start my laptop plz provide me service center address

whether i can get extended warranty if i get laptop from USA by my uncle

Posted on Apr 16, 2008

  • 3422 Answers

SOURCE: Hanns G LCD monitor produces some bursting or cracking sound.Requires reliable service centre or techicians address

HI,

I'll let you know soon...

Posted on Apr 19, 2008

SOURCE: ADDRESS OF SAMSUNG HARD DISK SERVICE CENTER

ground floor, shop 8-9, khira nagar,
bata chowk, opp. Bata Show room
C.B. road
senta cross mumbai.....

contact no...-022-66756951/52

any thing else sir .....

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have double images until the tv gets hot


Your TV was made in 2007. It's old. Live with the issue or get a replacement. Sell the old one on ebay. eBayeBay

May 06, 2015 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

Hi, I have a Sansui SV-4210 LCD HDMI TV . It does not switch on with the remote and only works once I unplugged the power cable and plug it back again. Lately it occurs every time and I have to do th


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

Sep 20, 2014 | Sansui Televison & Video

1 Answer

Why won't TV turn off and does not have light or sound


Does your tv error out? If the tv does not turn on and blinks a certain number of times, it is known a sos code. This is very helpful in finding the faulty circuit board. I am providing a link that you can download the service manual from to help you determine your issue.
http://elektrotanya.com/?q=showresult

Regards,

Joe Van Buren

Aug 03, 2014 | Panasonic Viera TH-50PX80U Plasma TV

1 Answer

Panasonic TH 42PA25. Front power switch LED is solid red. SC Board LED (D6583) is not lit. SS Board LED (D6765) is not lit. However, SS Board LED D6769 is lit. I suspect PA or P board.


The TV is on standby mode due to protection; some error in the board. If you have spare boards, try replacing it one by one, starting from display board.

Jul 28, 2012 | Panasonic TH-42PA20U/P 42 in. Plasma EDTV

1 Answer

Tv keeps turning off


Check for any loose solder terminals at the power supply regulator board. Resolder all suspected terminals, by applying fresh solder. If it do not help you, replace the board as card basis. Contact the nearest Pansonic authorised service center to buy a new one.

May 28, 2012 | Panasonic TH-42PX75U 42 in. Plasma...

2 Answers

Are the tnph0716abs and the tnph0716ads A boards compatible?


no they two boards are slightly fifferent and will not interchange with each other. You should be able to get the proper board for your model from www.tvrepairworld.com

May 16, 2012 | Panasonic Televison & Video

1 Answer

Tv turns on shuts off and the power light blinks 10


Hi,

10 blinks on Panasonic TH-42PX75U is a fault either on the 5V, 3.3V, 9V, Tuner power. The suspected board that is gone to malfunction is either the P board (power supply) or the A board.
To isolate which board is faulty, you have to test the output voltage of the P board through connector P6 and P7 using the multimeter set in DC measurement.
You must get 15VDC (P6) pin 1,2,3.
You must get 15VDC (P7) pin 1,2,
You must get 5VDC (P7) pin 5
You must get 5VDC (P7) pin 10

If there's a missing voltages above, you have to replaced the P-board.
Note : you should placed the multimeter test prod to the said test point prior from powering on the unit to get an accurate reading.
If the voltages are intact, you have to replaced the A-board.

Here's the link for the boards or obtain it from your local Panasonic Service Center.
P board
A board

Please double check the actual part no. of your board before ordering online to ensure you will get the exact replacement.

Also, please check if your unit is under warranty period, avail it because the manufacturer will fix it for free. Opening the rear cover will void the warranty.

Hope I helped you.
Have a nice day!

Jdvillanueva

Dec 19, 2011 | Panasonic Televison & Video

1 Answer

My panasonic model #TH-50PX75U wont turn on, it powers up but the led light blinks nine times. what is that code for or whats wrong with it


I would suspect faulty capacitors in your power supply, Take the back of and look on the power supply board for capacitors that have domed shaped tops, they may also have a brown liquid like substance leaking from them.

Replace these and this should cure your problem if it is capacitor related.

Mar 05, 2010 | Panasonic TH-50PX75U Plasma HDTV

1 Answer

My Panasonic Viera TH-42pz700u will not turn on, no red lights at all. I was out of town for a few days to come home to this problem. I replace the power supply board and still nothing.


Good day sir, hi, at this point, you have no choice but to bring it to a service center, replacing the power supply board is not the faulty part, you may need to measure voltages, from the ac mains to the board and to its power output to the entire TV. There are several possible fault part;
  1. the power cord
  2. the power switch
  3. the ac inlet that accepts the power cord to the board.
If these things are thouroughly checked then you have no choice but to get professional help from the service center or dealer.

Nov 06, 2009 | Panasonic TH-42PZ700U 42 in. Plasma...

1 Answer

Tv turns off light blinks


ok, the 12 code represents a major PCB main flaw in the main circuit board. it could be as simple as an IC issue or as large as as blown capacitors and resistors. this will require a qualified service tech for diagnosis and repair. i also suspect a problem with the power board as well. that blinking light is signaling that for sure.

Mar 06, 2009 | Panasonic TH-42XVS30U 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71172 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

66616 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...