Question about Microsoft LifeCam VX-3000 Web Camera

1 Answer

Lifecam causing problems with quickbooks.

Everytime I install my microsoft lifecam nx-3000, I get an error in my quickbooks program will not work. Why would life cam interfere with quickbooks? They shouln't affect each other at all, but it seems to be. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Probablyhas corrupt driver.
Disconnectthe Camera from the USB port and reinstall the CD or Downloaded softwareprogram. When the program asks you to connect the camera to theUSB port, do so and it should work.
Thento use it on the Web, do this.
Web Camera’s have to besetup on the program they are to be used with. Just installing the cameraon your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order forthe Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Yourfriends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly soyou can chat and see family or friends you are connected to.

D. AIM (AOL)Messenger

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing a lifecam nx 3000. get no sound from


Download the latest software driver from the Microsoft web site. Make sure your webcam is plugged directly into the computer and not through a hub or extension cable. Start up the Lifecam software. Using the Lifecam menu (triangle in the upper right corner), set the microphone volume to max via "audio and video settings".

May 11, 2010 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

The controll of my NX 3000 as zoom and tilt do not


The zoom works when I changed the resolution! The tilting function does not but I dont care about this!

Jun 22, 2009 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

NX-3000 flickering problem


try changing your color to 16 bit

Jun 16, 2009 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Want to uninstall windows live that was downloaded w/lifecam


no, leave them alone it will work fine with as many as you want. If you start deleting things you will end up deleting system files and then nothing will work right

Mar 04, 2009 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

Hello, i am trying to get microsoft web cam nx 3000 to work on my vista 32 bit OS however the driver does not install properly, driver error 39. can you help


Normal 0 Try disconnecting the Camera from the USB port and reinstall the software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Jan 25, 2009 | Microsoft LifeCam NX-3000 Personal Web...

2 Answers

I am unableto download the proper drivers for my micosoft lifecam NX 3000


OK. I dug around the Microsoft site and got as far as this page. You didn't mention the version of Windows that you have so this is as far as I can get you.

Jan 25, 2009 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

Error Msg: Problem occure during Hardware installation


Having Nero installed can cause this problem. This is from the Microsoft Knowledge base. There are some other programs that can cause this problem. Search "Lifecam Program" I believe I have tracked the problem down to this. I have not uninstalled Nero yet, But Nero crashes when trying to launch it video utilities. So at this point I am presuming that tere is a conflict.

Jan 11, 2009 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Ms lfecam nx-3000 no pic on mebeam


Normal 0 Probably has corrupt driver.
Try disconnecting the Camera from the USB port and reinstall the software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Jan 03, 2009 | Microsoft LifeCam VX-6000 (68C-00001)...

1 Answer

Microsoft live webcam shows error msg


I have a Work-A-Round so that the end result will provide both sound and
Video using the LifeCam NX-6000 with Windows Live on a
Windows Vista ULtimate 64 bit system, please post your system if
this solution works for you.

I guessed that the error messages, the BLUE SCREEN OF DEATH, and
a long list of conflicts that I discovered with this camera shown that
the sound was conflicting with the video.

Overview
I used manycam for the video and I configured Windows Live to handle sound.
I assume that you can get it to work as long as you split the video and sound
on two different programs.

What I did
I installed the vista driver
http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=Webcams&name=NX6000&os=WVista_32&lang=en
I installed windows live 8.1 (I did configure until after ManyCams)
http://www.microsoft.com/downloads/details.aspx?FamilyID=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
I installed ManyCams
ManyCam Virtual Webcam 2.3.21
http://www.download.com/ManyCam-Virtual-Webcam/3000-2348_4-10593500.html

Configuration
I started ManyCams and configured it to (optionally start on boot) and to
USE LIFECAM NX-6000 as the source.
I then started Windows 8.1 Start > Tools > Audio and Video setup
and configured it to use my
(1) speakers for output sound (Realtek HD Audio) [next]
(2) Microphone Microsoft Lifecam NX-6000 [next]
(3) ManyCam Virtual Webcam [finish]

Reboot, start ManyCam and then start Windows live.

If your still having issues, you may try to disable this service and try again
using the following instructions.
start -> run -> services.msc
then go to Messenger Sharing Folders USN Journal Reader service
click on proprieties and disable it

Ok, thats is what I did and I truly hope that it helps you.

Nov 18, 2008 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Lifecam nx 6000


Actually, I don't have a full solution.
http://social.msdn.microsoft.com/Forums/en-US/wlmessengerdev/thread/f4a9753b-83ee-4d96-b365-70da8d2c86e8
States the following:
start -> run -> services.msc
then go to Messenger Sharing Folders USN Journal Reader service
click on proprieties and disable it
Ok, My BLUE SCREEN OF DEATH is gone and the Initiation error, but
I have to you my headset as the sound doesn't work with my Lifecam NX 6000.

I have a UPDATED Vista Ultimate 64 bit system on a EVGA motherboard.

IF Microsoft can't get their stuff working easy on my new 3000 buck 64 bit system
it is know wonder that most of my other aplications won't run on Vista 64 bit either.

P.S. Does anyone want to buy a $3000.00 buck paper weight?

Sep 11, 2008 | Microsoft LifeCam NX-6000 Webcam

Not finding what you are looking for?
Microsoft LifeCam VX-3000 Web Camera Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...