Question about HP iPAQ Bluetooth GPS Navigation

1 Answer

I loaded ING 8 software and the GPS is nopt connecting?? Pls help

I loaded ING 8 and the gps is not connecting. I get an error message saying GPS not connected. Pls help

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • HP Master
  • 3,053 Answers

Hello Shanij,

Here is the manual for you with step by step instructions on how to use your unit. I have link you to the complete manual with specifications, resources, Picture illustrations as well as trouble shooting section. I hope this helps you. If this does, please if you can, rate my solution accordingly and some nice words would be appreciated.

Also if you like, here is my link to my own pages on fixya of other areas in my expertize. I am also completely trained and certified in Automotive, Appliance and of course Electronics. Here is my personal Link to my page. Thanks Mike

Posted on Oct 25, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When I turn on my dale jr gps, I get a Warning Box that says "Can't find the gps program! please set gps in File Manage! PLEASE HELP. The music comes on at start up but that's as far as I can get....

There seem to be a problem somewhere, that is why the shows you the error message, 'can't find the gps program'. The problem is that a file or more is missing, and the file is what starts up the gps. This is a software problem. First try to reset the gps by removing the battery and installing it back, then you press and hold the power on/off button for about 15 seconds, then it will restart. If it does the same, then you need to get the gps out of the car or anywhere it is and connect it to the computer using the USB cable, then you format the gps and reinstall the software and maps back on it. That will do the job for you. I am 100% certain about that.

Dec 25, 2010 | RightWay Spotter Dale Jr Edition Car GPS...

1 Answer

I have problem when going into the maps i gat an error "hardwareIDchange" i need to reset it and load the maps please help

It can be fixed...this is happening because you changed the sd card that contains the gps software. Uninstall the gps software from the device ( remove installed programs) and then install again. If it shows you again the same error, your gps software is pirated and you must buy an original one, or find a better cracked one ;). Remember : DO NOT DUPLICATE ORIGINAL SD CARDS because the licence file will not work and you will get that error "hardwareIDchange" ( "hardwareIDchange" it says that your sd card hardware id has been changed)

Feb 22, 2009 | Mitac Mio P550 GPS Receiver

1 Answer

Garmin Streetpilot i3 GPS cannot load map to memory card

Hi had a similar problem with a GPS. I had to give it in for service. As it turned out, the power inverter board had to be changed. The cost of the repair was about 1/2 the price of a new one.

My GPS was cutting in and out at times. I finaly died and would not start at all.

Jerry G.

Dec 04, 2008 | Garmin StreetPilot C330 GPS Receiver

2 Answers

Garmin Streetpilot i3 GPS cannot load map to memory card

The Garmin C340 comes preloaded with maps while the I3 require that the maps be installed onto a micro sd card.

You can place the micro SD card into a SD adapter and use a regular card reader to download your maps. When the software ask for 'Device' to download to use the drop down arrow and find your drive letter associated with the card reader. Using a card reader will be much faster since the it is ubs 2.0 vs ubs 1.1

You could also go to Garmin website and download and install the USB drivers, see link below.

Dec 27, 2007 | Garmin StreetPilot c340 GPS Receiver

1 Answer

Garmin Streetpilot i3 GPS cannot load map to memory card

A way around this is to insert the SD Card into the computer (SD Card reader), point the directory to the card and install the maps like that. I had to do that the first time I bought my unit because I couldn't figure it out and got frustrated. So I thought of this easy work-around.

Dec 22, 2007 | Garmin iQue 3600 GPS Receiver

1 Answer

Garmin Streetpilot i3 GPS cannot load map to memory card

I had this problem and the solution was to get a PCI USB card for my computer. My computer's motherboard didn't properly use USB and the Garmin GPS could never talk to the computer.

You can get a PCI USB card cheaply at nearly any good computer / electronics store, or even on Ebay. Once installed, just plug the USB cable into the socket on the PCI card and try the GPS again.

Dec 18, 2007 | Garmin StreetPilot C330 GPS Receiver

4 Answers

Garmin Streetpilot i3 GPS cannot load map to memory card

haveing a hard time trying to download any updates. I dont have the disk eather for my unit. I have the streetpiolt 2720

Sep 24, 2007 | Garmin StreetPilot i3 GPS Receiver

Not finding what you are looking for?
HP iPAQ Bluetooth GPS Navigation Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP GPS Experts


Level 3 Expert

81423 Answers

Will Halftowaite

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75786 Answers

Are you a HP GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides