Question about Apple iPod nano

1 Answer

Need driver for ipod nano for windows millenium

My windows millenium doesn't load my ipod nano. When I plug the ipod in to the usb port, the ipod gets recongized as an icon but when i click on the icon it asks if i want to format the drive now?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 42 Answers

Hi,
You will need to download the latest version of iTunes. It is free. When you have done that, load all of your music into iTunes. Then connect your iPod to the computer with the internet connected. You should be able to see your iPod on the left side of iTunes. You can then click the music tab to tell itunes what music to load into your iPod.

Be sure to click the arrow next to your iPod when the syncing is finished to release your iPod from itunes. Also click the green plug icon at the bottom right of your windows screen. If you cannot see the plug, click on the white arrow until you see the green plug. Click on it and you will see your ipod listed as a mass storage device and a message asking if you want to disconnect it. Click disconnect mass storage device and wait until you see a message saying ;safe to disconnect mass storage device. Done. Hope that helps.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock


Unlock an iPod Model A1199
Although the second generation iPod Nano (also known as 2G) uses a four-digit pass code that prevents unauthorized access to your iPod by locking the screen, you can also unlock the device by plugging it into your computer's USB 2.0 port.
When the 2G iPod Nano is connected to the computer it is synchronized, and automatically unlocks the screen according to the official Apple site.
In order to successfully unlock the Nano it must be plugged into the primary computer used for synchronizing content.

Click "Start," "All Programs" and "iTunes" on your PC's desktop, or click "iTunes" on the Macintosh's desktop dock.
Plug the iPod Nano's cable into the docking port on the iPod Nano.
Plug the other end into the USB port on the computer to open iTunes.
Click "Controls" at the top of the iTunes' menu, and select "Eject iPod."
The iPod Nano's screen will be unlocked once it is ejected from your computer.

Manual Guide download
http://manuals.info.apple.com/en_US/iPod_nano_2nd_Gen_Features_Guide.pdf
Unlock an iPod Nano Code
With the latest iPod Nano model, you can set a four-digit code and lock all intruders from accessing your iPod.
In order to use the device's functions again, you need to enter the correct code.
However, if you happen to lose or forget the code, you will need to find another way to unlock your iPod Nano.

Plug the iPod USB cable into the bottom of your iPod Nano.
Plug the other end of the USB cable into a free USB port on your Mac or PC computer.
Open the iTunes program by using the Dock on a Mac or the Start menu on a PC.
Select your iPod Nano from the "Devices" list in the main iTunes window.
Click on the "Sync" button to make a connection between your computer and your iPod Nano.
Click on the "Eject" symbol once the syncing process is complete.
Remove your iPod Nano from the USB cable.
The iPod's lock code will now be reset and you will be able to access all features again.
Navigate to the "Screen Lock" option in the iPod menu to lock your iPod's screen again.
Since your iPod's lock code was just reset, you will be prompted to select a new four-digit code.


iPod Support
http://www.apple.com/support/ipod/

Jul 24, 2013 | Apple iPod nano

1 Answer

I cannot install music from my computor to my Ipod 4 nano


If you can't connect iPod nano to your computer , make sure;
  • you have installed the latest iTunes software from www.apple.com/ipod/start.
  • Try connecting to a different USB port on your computer. Note: A USB 2.0 port is recommended to connect iPod nano. USB 1.1 is significantly slower than USB 2.0. If you have a Windows PC that doesn’t have a USB 2.0 port, in some cases you can purchase and install a USB 2.0 card. For more information, go to www.apple.com/ipod.
  • iPod nano might need to be reset (see page 64).
  • If you’re connecting iPod nano to a portable or laptop computer using the iPod Dock Connector to USB 2.0 Cable, connect the computer to a power outlet before connecting iPod nano.
  • Make sure you have the required computer and software. See “If you want to double check the system requirements” on page 68.
  • Check the cable connections. Unplug the cable at both ends and make sure no foreign objects are in the USB ports. Then plug the cable back in securely. Make sure the connectors on the cables are oriented correctly. They can be inserted only one way.
  • Try restarting your computer.

Mar 11, 2009 | Apple iPod nano

2 Answers

Ipod nano 4gb


When i open my Apple IPod, screen turns to initiation mode and does not open. My PC also does not recognise the USB devise. Kindly help.

Regds,
Rafi

Jun 06, 2008 | Apple iPod nano 3rd Generation

1 Answer

Ipod Nano Sync


When you plugged the IPod into the new or cleaned computer, it was like plugging the iPod into a brand new computer with different specs. The formatting options may have changed, and when the iPod tried to adjust for this format difference, the DB or file system could have become corrupted. forutnately, Apple has ways to correct this problem.

To help you, I will need to know what OS you have? Windows XP? Windows Vista?

Of course, this is only one of many possibilities. I would start simple - do the 5 "R's" that Apple suggest in the manual:
Remember these five basic suggestions if you have a problem with your iPod nano. If
one of the following doesn’t help, read on for solutions to specific problems.
â Reset your iPod nano. See “General Suggestions,” below.
â Retry with a different USB port if you cannot see iPod nano in iTunes.
â Restart your computer and make sure you have the latest software updates
installed.
â Reinstall iPod and iTunes software from the latest versions on the web.
â Restore your iPod nano. See “Updating and Restoring iPod Software” on page 50.
After doing this, try to resync thos songs.

Good luck - let me know if you need more help!

-Tha Mp3 Doctor

Jun 05, 2008 | Apple iPod nano

2 Answers

HELP!!!


What OS do you have?

May 19, 2008 | Apple iPod nano

1 Answer

Ipod


If your iPod nano won’t turn on or respond
1) Make sure the Hold switch is off.

2) If that doesn’t work, connect iPod nano to your computer’s USB or FireWire port. Your
iPod nano battery might need to be recharged.

3) If that doesn’t work, your iPod nano might need to be reset.

a) Toggle the Hold switch on and off (set it to Hold, and then turn it off again).
b)Press and hold the Center and Menu buttons for at least 6 seconds, until the Apple logo appears.

4) If that doesn’t work, you might need to restore iPod nano software.

Mar 12, 2008 | Apple iPod nano

21 Answers

Ipod not recognized by computer or itunes


I struggled with this issue for a while and finally found a post that helped me. Hold menu and the center buttons until the iPod turns off. Then, immediately hold the left and center buttons to pull up the iPod diagnostic menu. Scroll down to the option "Reset" and select it. My iPod was finally recognized by iTunes. Good luck :)

Nov 20, 2007 | Apple iPod nano

1 Answer

Ipod nano


Maybe the memory is full? that's all i can get from your description

Try the 5 r's:
Reset, Retry, Restart, Reinstall, Restore
Remember these five basic suggestions if you have a problem with your iPod nano. If
one of the following doesn’t help, read on for solutions to specific problems.
â Reset your iPod nano. See “General Suggestions,” below.
â Retry with a different USB port if you cannot see iPod nano in iTunes.
â Restart your computer and make sure you have the latest software updates
installed.
â Reinstall iPod and iTunes software from the latest versions on the web.
â Restore your iPod nano. See “Updating and Restoring iPod Software” on page 50.

Oct 30, 2007 | Apple iPod nano 2nd Generation MP3 Player

2 Answers

Ipod nano to Millenium computer


Technical Specifications: iPod nano Mac system requirements: Macintosh computer with USB port (USB 2.0 recommended) Mac OS X v10.3.4 or later Windows system requirements: PC with USB port or card (USB 2.0 recommended) Windows 2000 with Service Pack 4 or later, or Windows XP Home or Professional with Service Pack 2 or later http://www.apple.com/ipodnano/specs.html

Jul 10, 2006 | Apple iPod nano

1 Answer

Ipod nano, hitting eject results in system restart


First, make sure you have installed the software from the iPod CD. in any case, try to reinstall it. Second, Try connecting to a different USB 2.0 port on your computer. Last, Your iPod nano might need to be reset (see page 43 on the user guide). By the way: If you?re using a Mac, you can also eject iPod nano by dragging the iPod nano icon on the desktop to the Trash. If you?re using a Windows PC, you can eject iPod nano by clicking the Safely Remove Hardware icon in the Windows system tray and selecting your iPod nano.

Nov 28, 2005 | Apple iPod nano

Not finding what you are looking for?
Apple iPod nano Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple MP3 & Digital Media Players Experts

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Raisin Brann

Level 1 Expert

28 Answers

nexrad_chris

Level 2 Expert

117 Answers

Are you an Apple MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...