Question about Office Equipment & Supplies

1 Answer

Konica 7145 Question

I just cleaned out my 7145 , it seems the defuser was dirty , I cleaned it but now looks like it is out of toner and is not. The Konica guy where I work said hold the 3 and 6 keys , turn on power , release them then press something in which I forgot. He told me it will recharge it? The problem is the roller that is magnitized and pulls the toner is not magnitized anymore. HeLp!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

This my friend i would have to see if you say the MAG Roller doesn't hold the toner you might have a different problem nothing you can do in service mode ihave see it sorry on this one

Posted on Nov 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the hard drive


check the following link, maybe it will help you:
http://diagramasde.com/diagramas/otros/7145-7222-7228-7235SM.pdf
Usually, the hard disks are located where all the boards are, due to the fact that hdd needs to be connected with this boards and if the wires are longer, interferences might appear.
If you need anything else, just drop us an email at office@bizhubreset.com
Also, please visit our websites, we're sure you'll find useful things there
---------------------------------------------------------------
Konica Minolta Error Codes & Solutions - http://www.kmcodes.com
Drum, Transfer Belt and Fusing Unit Firmware Reset - http://www.bizhubreset.com
Drum and Toner Chip Reset - http://www.chipreset.eu
Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu

Aug 11, 2014 | Konica Minolta Bizhub 7145 Copier

1 Answer

Konica 7145


fuser code hot part replace it

Apr 13, 2014 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

I need a solution for konica 7145 error code 26-3


F26-3: TDS (Toner density sensor output abnormality) Abnormal output from TDS (Toner density sensor) TDS output ripple voltage failed to reach 0.5V
Possible that developer needs to be replaced or Toner is not supplying into the developer Unit.
Service Manual available to your model at: http://fixmfp.com/index.php?route=product/product&path=60&product_id=52

Sep 06, 2013 | Office Equipment & Supplies

1 Answer

Problem with Konica 7145.. When i make copies it duplicates some lines and reprints them lower on page (more faded) and also the first lines of the copy are blured in a point that they are not readabl


Manousos Xatzidakis:

I would take another look at the drum cleaning blade as well as the CEL and PTL. Any time I've had problems with double images, the drum carriage and parts associated to it have been the problem. I remember one notable case where I removed and shrouded the drum to protect it from light, cleaned both the charge corona and the discharge corona, cleaned the PCL and the PTL of toner dust, vacuumed the drum carriage of toner dust, cleaned the developer unit and replaced the developer. I finally got clear copies and the customer was satisfied.

Sep 22, 2012 | Konica Minolta Office Equipment & Supplies

1 Answer

Konica 7145 i have an error message 0006 I have replaced drum in drum assy. it gave me an f26-3 error message performed L detection now it gives 0006?


Check Toner control sensor board, on drum unit behind drum, is clean, try L-detect then, try it a couple of times. If that fails you will then have to change developer, and perform L-detect.

Sep 13, 2010 | Office Equipment & Supplies

1 Answer

Konica 7145 Legacy Print Driver


konicaminoltaus.com has a complete list of the drivers for download on the site

Oct 09, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Error code f35-6 on konica 7145 copier


Replace Thermo- fuse (open ) fuser not getting to 160, and clean thermister, toner builds up between roller and thermister causing overheating of fuse to blow .

Apr 25, 2008 | Office Equipment & Supplies

2 Answers

KONICA 7145 PRINT DRIVER


The Konica Minolta 7145 have two different companies that made the print controller. If you have an older KM 7145 then you need the old Peerless Legacy driver. It's not on KonicaMinolta's website. You can use HP 5Si driver, but you won't have and of the options (ie finisher, fax, lcc).

Mar 14, 2008 | Computers & Internet

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

74418 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...